Rain Bird T63-500S Drip Irrigation 1/2" (.630" OD) Blank Distribution Tubing, 500' Roll, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I've tried them all and they seem to work. This stuff is far superior to what you can get in your local store.
There are no holes in it. It's designed to be used with sprinklers.
The hose does not have any holes in it. You punch holes where you want them, then fill them with 'oops' plugs when you change your garden plan the following year. My hose(s) have lasted for years and are still in good condition. There are a lot of holes, a lot of patch plugs, and a lot of new emitters in brand new holes.
I'm not sure I understand what you're trying to say. Is it possible for you to use the HOSE? Yes, but pvc is preferable. Gophers, ground squirrels, and rabbits all enjoy chewing on slick surfaces such as pvc or electrical wire, so use pvc (1/2 or 3/4" ID) but bury it. The pvc is denser and more difficult to chew. It's simple to chew through the Rain Bird T63 (or any other brand of flexible vinyl tubing). In the garden, I use the Rain Bird T63 for drip irrigation and place it on top of the ground beneath a thick layer of mulch. I'll be able to use it for a long time. After about 3 years, the tubing becomes more rigid and far less flexible, and the drip emitters become clogged with iron oxide and calcium carbonate, so I can pick it up, relocate it, reconfigure it, and so on. To make it usable again, I'll need to soak the hose and emitters in gallons of vinegar. Because it is so inexpensive to simply buy new at that point, you can bury it, but I would rather invest in 3/4" PVC for a more permanent installation due to the price point and the vulnerability to breakage, UV, and critter damage.
Selected User Reviews For Rain Bird T63-500S Drip Irrigation 1/2" (.630" OD) Blank Distribution Tubing, 500' Roll, Black
Be careful who you buy from. The majority of couplers on the market are designed for tubing with an inner diameter of 5/8 inches (0. 625-inch screen) with a resolution of 0. The compression couplers by DIG, which can be found at HD, and the raindrip product line of shutoff valves and compression T's, which can be found at Lowes, are both for 5/8 diameter tubing. Those are the connectors for 0. Hose with a diameter of 70 millimeters on the outside. This pipe has an inner diameter of slightly more than 1/2 inch and is rated at only. The outer diameter is 630. The pipe appears to push in and bite when used with the standard big box drip parts I mentioned above, but under minimal pressure, the pipe has a tendency to blow out the couplers, leaking water. The tubing, on the other hand, has a thin wall and becomes soft and pliable when exposed to the sun. If you're punching this, you'll need to squeeze the tube to prevent it from collapsing as you punch the hole. If you don't, the tube will collapse flat, and the punch will probably punch a hole in the thin walls.
Drip Lines are being run along a 500-foot slope to supply Spiral Drip Fields beneath mature trees along treelines. Each Spiral Field is made up of 1/2" Poly Line, which provides approximately 25 Emitters. I've spent a total of $7,500 on items. This RainBird 1/2" 'Distribution Line' comes on spools of 100 feet. I'm using it as both a 'Spine Supply Line' and a 'Spiral Drip Field' beneath each tree along the treeline. I purchased ft Spools of this material, but only one Spool was defective. The first 50 people to sign up will receive a prize. It appeared that ft had been laying around the 'Back Lot' for about a year, as it was extremely crumpled. The "first 50 feet" were essentially useless. Aside from that, the RainBird Tubing appears to be in excellent condition. br>br>As I've progressed, I've had to pick up a lot of new information. along with this project. br>It is critical that everyone remembers that THIS INDUSTRY IS "UNREGULATED. " Fittings and other items, as well as much else, do not meet 'API' standards. "Normal Plumbing" is 'Regulated,' and is typically designed to 'Contain' Potable Water through the use of 'Tight Joints,' as defined by API standards. This arena, on the other hand, is the polar opposite of that. The goal of THIS type of plumbing is to 'Create Leaky Plumbing. ' We would, however, prefer it to be done in a more orderly manner. If your design necessitates Tight Joints, the best advice I can give is to use PEX Ring Clamps in conjunction with a PEX Crimper. Both are a LOT less expensive than hose clamps. I looked up the differences between 1/2" DripLine Tubing and 1/2" PEX Tubing and discovered that there are only a few. a difference of 0. 005 inch; I use PEX Crimp Rings as a result of this. And here's something else: They complement each other perfectly! Another piece of advice: Purchase a 'PEX Tubing Cutter' rather than a 'DripLine Tubing Cutter. ' I purchased a red-colored, solid-metal PEX tubing cutter, and it is INCREDIBLE.
This is what I discovered after opening the hose and laying it out for the first time. The hose has a flat section that needs to be cut out. That part of the site isn't accessible. Next, I discovered that the hose had already been spliced before it arrived at my location. In addition, the hose had a hole in it. I had previously ordered this hose with no problems, and I needed more, so I wanted to order the same hose I had previously ordered, even though it was now more expensive than similar hoses. I paid the extra money and received a subpar product in return.
I'm using 1/2 inch tubing to replace all of my old drip tape. This tubing is ideal for putting the small emitters in, and it's also very easy to do so. The connectors require some effort to install, but with a little soap and a pair of pliers, I was able to do so successfully, and believe me when I say they will never come out! The only issue is that I find it difficult to unroll lengths of tubing without becoming tangled. I'm not very strong (at 81), so having someone else assist me would be much easier. On my farm, I still need to replace miles of drip tape and water many more rows of plants. I've gone through two 500-foot rolls of this tubing and am placing an order for more today. Oh, the Jerusalem cricket, a nasty little insect, is the reason I'm ripping out all the drip tape. To get water, it chews holes in the drip tape, but it can't bite through the 1/2-inch tubing. Look it up; it's enormous and obnoxious. (As well as thirsty. ).
Related Products For Rain Bird T63-500S Drip Irrigation 1/2" (.630" OD) Blank Distribution Tubing, 500' Roll, Black
