Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You do not need to disassemble the filter to clean it; however, you must disconnect it from your water supply. The mesh filter can easily be removed and rinsed, then replaced and reconnected to your water source. Irrigation tubing can be left attached to the other end of the assembly the entire time, if that's what you're looking for. Please let us know if there is anything else we can do for you:
When using a timer, it should be used before any pressure regulator to ensure that the regulator is not under constant pressure 24 hours a day, seven days a week. As a result, your four-valve manifold irrigation timer should go ahead of this adapter. For your situation, it appears that the simplest setup would be to start with the Water Source. Then there's your irrigation timer with four valves in a manifold. Then, for each of your four zones, one of these adapters. I hope this information is useful.
According to what I've read, not all 1/2 tubing is actually! It has a diameter of /2". Various manufacturers have their own set of rules. Go with Rainbird or whatever the company recommends for the hose type, as someone else suggested. If the problem is popping off, it appears to be that.
Dottie, good day! Yes, this assembly can be used to connect any 1/2" tubing (from. 520 to . Not 1/4" tubing, but 620 inner diameter tubing to your main water source. People frequently use 1/2" tubing as the main irrigation line that connects to the water source, and then branch out 1/4" tubing from the main line as needed. It's possible that's why they're often bought together. Please do not hesitate to contact us if you have any further questions!
Selected User Reviews For Habitech Drip Irrigation Faucet Adapter Kit: Connect 1/2" Tubing to Faucet or Hose, Backflow Preventer, Filter, Pressure Regulator - No Assembly Required
All you need to connect a 1/2" in-line irrigation system to a standard male 3/4" faucet or hose line is this one item, which includes a 3/4" fitting, filter, 25 PSI reducer, and 1/2" irrigation tube connector. It makes things a lot easier. br>br>I used existing 3/4" faucets off of 1" irrigation plumbing at 65 PSI to install two of these for two separate 1/4 acre fields of row vegetables. To prevent the 2 gallon/hour emitters in 1/2" irrigation tubing from blowing out, I needed to use a pressure reducer on the lines. Because of the higher pressures in the irrigation tubing, you risk blowing out the emitters if you connect to a full pressured line. The Habitech unit's 25 PSI reducer is ideal. br>br>From the faucet to the Habtiech adapter, I used a 3/4" x 10' piece of hose, which allows the adapter to lay flat on the ground in-between uses. in accordance with irrigation tubing - There's a lower chance of it snapping at the tap. Plus, it will fit nicely between the faucet and the hose if I need to use a battery-operated timer on the line. Then, using this Habitech adapter, connect the 1/2" irrigation tubing. The connector is a standard 1/2" screw-down connector that can be tightened by hand. In my vineyard, I use similar devices, which are far superior to the slip-resistant ones. Connectors of this type can be found in big-box hardware stores. These are simple to unplug and reconnect. Use it; they're well-made and provide a solid connection between the adapter and 1/2" irrigation tube. br>br>A very simple installation that reduced the pressure to 25 PSI for 1/2" tubing as advertised. I can easily drip irrigate each of my 1/4 acre plots with just one unit. If you have a standard 3/4" faucet or hose, this is a great way to add drip irrigation quickly and easily.
When we moved into our new home, we discovered that the sprinkler system in the backyard was completely broken. I couldn't find the sprinkler valves for the back yard, even with professional assistance, so I decided to research and install my own drip irrigation system to automate the watering process, primarily because I'm too lazy to water my backyard every other day. Because of the positive reviews and the variety of options, I chose the Rainbird family of products. br>br>For the trees and shrubs in my yard, I chose drip emitters, and the system's backbone was 1/2 in tubing. Then 1/4-inch tubing for individual plants, flowers, trees, and shrubs. You can install them in one of two ways. Like I did, you can simply install them into 1/2 in tubing. Another option is to install a 1/4-inch coupler into 1/2-inch tubing and then run a 1/4-inch tube to the plant. The drip emitter should then be connected to this end. Some people complain that the water pressure pushes the emitter off the end of the tubing, so I went with this configuration. This item was purchased to connect 1/2 inch tubing to the Tee and elbow fittings. According to what I've read, these drip systems work best at a temperature of 20 degrees Fahrenheit. 25 PSI. So I got this regulator because the pressure coming out of the outside spigot is between 30 and 40 pounds per square inch. 40 PSI. br>br> Reasonably priced. br> Simple to operate. I was able to connect my 1/2-inch drip irrigation tubing to my water hose using this method. My water spigot is at the end of the line. br> So far, I've been very pleased with the results. This device was even put to the test with my B-grade student. Timer for Hyve. The second image depicts 1. During watering, the flow rate was 83 gallons per minute. 2 gallons per minute equates to approximately 20 gallons per minute. 25 PSI. So, as far as I can tell, this regulator is doing its job.
- So far, nothing has been discovered. br>br>I am pleased with this regulator's performance; it is performing as expected. I'll keep this review up to date as needed.
It's quite effective. I've only had them for a week, but they're already far superior to the RainBird model, which is also available on Amazon. Installing it was a breeze. br>br>UPDATE: br>br> It is December of this year. I've had these (and two more in my front yard) for a year and they're still working as well as they did when I first installed them. Note that I live in Southern California, where the lowest temperatures are in the mid-thirties Fahrenheit. If your climate is colder, you should drain the pool and bring it inside for the winter.
To be honest, I've only had this item for about 30 minutes, so a thorough review isn't possible at this time; however, I felt compelled to share a few initial observations in the hopes that they might be useful to someone. I could see that the mesh filter was partially crushed and puckered at its base right away (see photos). I'll have to take everything apart, reshape it, and put it back together again. To get the filter to do what it was designed to do, you must first seat it. That prompted me to inspect the sealing surfaces of each of the three components (backflow preventer, pressure regulator, and tubing adapter). The flat hose gasket between the backflow preventer and the pressure regulator was twisted and buckled in such a way that it was only leaking (see photos). I took it out, flattened it out, and put it back in. Before reassembling, make sure the gasket is in place. Although there were creases in the gasket, it should be able to function. For the time being, I'm giving this item three stars due to the damaged and poorly assembled components. For what it's worth, this item has "Made in America" printed all over it, so I'll amend/ update my review after I install it and use it for a while. Really? Call me a slacker and a dork if you want to fashioned, but for $23, I still resent having to disassemble and reassemble something that an untrained child should be able to put together with ease. br>NOTE: THIS PAGE HAS BEEN UPDATED. For over two months, I've been using this item on a timed garden irrigation system and it hasn't failed or leaked. As a heads-up, I'm leaving the three-star review. Customers are responsible for double-checking this item's assembly before installing it.