MG Chemicals - 422B-340G 422B Silicone Conformal Coating, Clear, 340 gram Aerosol
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is true. Currently, Dow 1 is used as the conformal coat chemistry You can download the datasheet by using the part number 2577LV. There will be a small reduction in efficacy and a slight color shift to blue (higher CCT). In addition to its use on Class 2 power, other products have been created that utilize 120V Class 1 power in normal environments.
I find the coating to be smooth, and it does not appear thick enough to create a slimy finish Surfaces with a high coefficient of friction.
It would be quite possible to see a faint In blacklight, this takes on a whole new level of importance
Yes, and you can use this for that as well. The circuit board thermal paste is designed for high heat so it can easily withstand high temperatures and will last for a long time. However, I recommend that you use the non-expiring As an additional barrier, I am also prone to double up on the protection and cover the socket with Kapton tape. It's even possible to use some Kapton to seal the heatsink to the motherboard and still completely remove it if needed, depending on the motherboard, heatsink and socket design.
Selected User Reviews For MG Chemicals - 422B-340G 422B Silicone Conformal Coating, Clear, 340 gram Aerosol
The electronics on my RC multirotor are powered by this. I am able to go from wet weather in the NW to the dry weather in the spring/winter. My flying does not involve flying in extreme conditions (heavy rain or snow), but I do land on wet grass very often in drizzles and in heavy rain. Added conformal coating a few years ago and haven't had any electrical issues. The metal is very easy to solder through without having to remove it first, and you can then apply a touch up coat over the new solder to make repairs as easy as possible.
An easy way to protect electronics, it goes on smoothly and recoats in no time at all (20 minutes). A very slight tint of UV fluorescent dye is added to this clear spray so it can be seen exactly where it has been applied to ensure the component is completely There is no flexibility at all in this material. If there were any flex, it would Allow it to cure for at least a day (48 hours or more for full cure) before you expose it to liquids. As PlastiDip is less expensive and clear, it does not weigh as much nor is it as flexible or impact-resistant as it.
My electronic board needs waterproofing, and it does an excellent job of coating it. My hope is that you can save me the hassle of trying to seal the container on my own. It's important to keep in mind that the final product will have a blue/purple tint to it, so don't spray it all over the whole thing. You should first separate the item you wish to waterproof. Ensure that you spray all over the place as well. Then make sure you use multiple coats of paint in case one spot gets uncoated and the entire system is ruined. You can enjoy outdoor activities any time of year!.
I really like this product. It does what it says on the tin. A high level of pressure is desirable. A drying time of *7 minutes is required. Allow to dry overnight if heavy use is expected.
Applied clearly, really seals the space under the SMDs (if you apply In the past, I have used it to reseal boards that must regain functionality after being submerged for several hours, and it has never let me down Ensure that it doesn't get into any plug connectors, and that it doesn't get into anything submerged. Connectors on the board or on the ribbon.
This is useless! As soon as I finished the old one, I opened it up. I ordered it late last year and haven't used it yet. It was a pleasant surprise to discover that there was no nozzle under
There is no way to use this and it is now trash because there is just a hole in the metal (that seems to be locked). The MG needs to get his quality control in order There is no way this can be tolerated!.
I was surprised at how fast it dried -- less than 15 minutes. The material was used on some components on my car and I plan to coat some other small boards and the boards in my backup generator with it. Though I've not really used it yet, I am glad I got two cans since I think it will be extremely helpful.
This product protected a radar detector (Escort X50) mounted on my motorcycle from rain and melted snow. I've ridden under a couple of light to moderate rainstorms since applying the product, and the device works as expected.
Related Products For MG Chemicals - 422B-340G 422B Silicone Conformal Coating, Clear, 340 gram Aerosol
