BTF-LIGHTING WS2815 (Upgraded WS2812B) 3.2ft 144(2x72) Pixels Individually Digital Addressable RGB Dual Signal LED Flexible Strip Light 5050 SMD IP30 Non-Waterproof Magic Dream Color DC12V Black PCB
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Customer @YouLitty's answer seems to be correct. Please take a moment to read his answer carefully. Using the example above, you need 6 injections if the length is 15m. The power must not go through the controlers, only the data lines and the ground on controlers. It's also gonna be necessary to power both ends of each 5 meter. We can help you with connection issues if you still don't know how to connect, call us at [email protected] A lighting system. Accessed at www.com
After you cut the wires, you must solder them in the same order as you cut them. The task can be made easier if you buy 90 degree adapters. As a result, you will have to add wires to fill the gap left behind by the 90 degrees. The pixels are extremely bright, so you should dim them with a good controller.
As they are not directly plugged into a wall outlet, I believe that does not apply.
There is no problem connecting data wire and backup data wire on the same power line. It will be possible to connect data wire to backup wire without connecting data wire to backup wire.
Selected User Reviews For BTF-LIGHTING WS2815 (Upgraded WS2812B) 3.2ft 144(2x72) Pixels Individually Digital Addressable RGB Dual Signal LED Flexible Strip Light 5050 SMD IP30 Non-Waterproof Magic Dream Color DC12V Black PCB
It's a no-brainer The 2815 LEDs in this strip not only match but are bright and clear compared to a normal 2811 strip. It was to see what 144 LEDs per meter would look like that I bought these. As a normal 60 per meter user I think these are just as cool as I expect. The power consumption is very good for the price, and the customer service has been great as well.
The update is As soon as I finish the project, I will update the review. So I soldered all four strips together, protected with clear silicone and heat shrink tubing, and finished the project. Removed remaining flat cables and replaced them with 18awg round cables. Installed silicone and heat shrink tubing to repair the damaged ends. Despite the fact that it is not readily available on the market, it required some modification. I am very pleased with the outcome! The pool has 60ft of addressable led strips with only two power inputs. They cost $94 each. I bought four. We had a problem with one of the strips that did not have enough silicone on the ends. As the design has four flat cable, it can be difficult to seal. If you want to make it water resistant, you can add some extra silicone and heat shrink tubing. In two other strips, a bad led has broken after only a few nights of use, so we'll have to see.
Light strips from BTF 2815 have not caused any problems for me. The weatherproofing is achieved with a silicon rectangular tube. Having dual data paths makes these a bit more fault tolerant than some others, so I chose them because they have worked without error for me so far. I was able to use these at "-" I was able to pass 13F without issue.
There were two 5 M strips of 2815s in my shopping cart. A dead LED was immediately noticeable when the package was opened. The returned item was replaced by Amazon in exchange for the original. As soon as it was opened, one of the LEDs was bad. It would work if I really pressed hard on the chip, through the silicon coating, which would indicate that there is a problem with a trace of a As of now, 67% of this product has failed, which is indicative of poor quality control in the production process. However, I had already installed one of the strips, so I would have sent it back and searched for another brand to replace it. I will try one more time to see if I can find a better The poor quality of the service wastes a lot of time.
In a nutshell, it works as expected. I can't remember the last time I ran in the rain and sun for five straight days. The problem is not at all a concern. Upon returning the defective item to their store on AliExpress, they offered less than 10% back on that one and were not willing to assist. I got this in a hurry to replace the defective item I bought from their store. You better get the product that is not defective, or you'll end up wasting your money.
This is not something I would recommend. It was almost immediately evident that I was dealing with When the strip is powered completely by 12v, it gets incredibly hot.
On full brightness, these LEDs get ridiculously hot, so they were clearly not designed to handle 12V. There is no way they'll last long that way. Nevertheless, they will still sparkle brightly at 7V, but with less heat and with a lower current. If you're using a variable power supply or can use a step down, then this may be an option. Otherwise, you could go with the 5v lights like ws2812 or 2813 that are longer lasting and are not likely to.
It's a no-brainer The SP107E controller is paired with it. You can see how the strip's functions are addressed properly in the screenshot.