Urbanest Adjustable Solid Zinc Curtain Rod Bracket Wall Holder, Fits 1-inch Diameter Rod, Brushed/Stainless Steel
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
My understanding of the word 'swivel' is a little unclear. There are two pieces to the unit. This anchor (attached to the wall) and hook form the anchor chain. of the anchor can be detached completely from the anchor part and flipped around (360 degrees). There is one small screw at the top of the anchor part (you can see it at the bottom In order to keep the anchor connected to the hook, it is tightened. It might help if you read this.
In this case two of the items shown in the image will be sent, if you want to hang your curtain with it, then 2 of these will be sufficient to hang one curtain depending on the weight that can be held by a rod with these 2 hooks, I
As long as the curtain is not too heavy and is properly screwed to something solid, like wood, there should be no reason why it cannot be hung from the ceiling. The other adjustment would be to drill a hole in the side of the front piece so that the screw holding this piece in the tube actually goes into the hole, so when the piece is hung, the front piece does not fall off the piece that has been screwed to the ceiling.
The taper tapers from approximately 1/2" where the screw is to approximately 3/8" where the bend is. It takes a lot of effort. The weight capacity of an anchor is determined by its location on the wall.
Selected User Reviews For Urbanest Adjustable Solid Zinc Curtain Rod Bracket Wall Holder, Fits 1-inch Diameter Rod, Brushed/Stainless Steel
These do not hold my curtain rod up at all. I took a picture off A move resulted in the loss of the original hooks. It is much smaller than I thought it would be, however, even if they had fit, I would have found them too constricting and difficult The curtain rod sat on top of them, but it wasn't any more secure than before, and it was easier to grab the rod without the brackets. After throwing them out, I ended up throwing away the documents. In order to tilt it at an angle, your handyman should hold it at an angle of 45° As a challenger like me, you will end up stripping the screws and giving up halfway through the task.
This product was bought to hang a DIY rod that was made from heavy PVC pipe. The oval base makes a precise measurement difficult. In my opinion, a rectangle shape is best. Adjustable parts are hard to perfectly align when they are tightened in place, since they tend to turn as they are tightened. By the time I tightened the screws, they were scratched on the inside. While the weight feels sturdy and secure, you should not bother with the flimsy drywall anchors included in the package You can buy your own that you can use Outside the drywall, screw or create an overlap "lip" to hold it up. It tends to cave right into the wall when the ones provided are used. While they did not fit my 1-1/2 inch foot, they were still great for the price My selection was limited since I needed more distance from the wall and was only able to use 1/4" rods.
I saved tons of money by not purchasing a prebuilt Rods for curtains were made. It's unclear what happened to the broken one, but it has yet to go missing it was easily and cheaply replaced and is still hanging there. The brackets I recommend are still available, if you're interested.
Extension did not reach the 5" mark, but instead reached the 6". It is very unlikely that 5" will support much weight. Upon extension, the inner tube has a too small diameter, causing it to droop. If you tighten the screw, the threads will strip in the soft metal and the screws will droop. Since it is hard to find brackets for rods up to 5" in diameter, I improvised by jamming a washer bent into a curve between the It worked well, but it still needs to be improved.
My original curtain rod support brackets bent under the weight of four lined drapery panels, so I had to replace them with these brackets. They were 144" dimesion x 1" diameter hence, they were not powerful enough. The adjustable brackets come in a two-piece design, with the extending part that fits inside the solid piece that is attached to the wall. Whenever the extension is not made, but the length is It provided very substantial support to a curtain rod that was 5 inches long with heavy curtains. This design is metal inside of metal. My thanks to everyone who helped me find the well-being information The hardware was designed to replace the old equipment.
A tack is used for these brackets There are 3 places on the thin back plate where the rod is inserted in which welding is done. Installing these with a rod, rings, and drapes would have been useless because the rod would have bent or broken loose from the plate in no time, as I can either eat the cost of this junk or pay to return them. As a result, I will no longer buy from Amazon as often.
In order to use the rails properly, I had to replace the brackets by adjusting them. These are the results of my research. Even though I am pleased with their cost vs. quality, they could be slightly more valuable. A quality product.
These extenders solved my problems. In addition to going over my outside-mount room darkening blinds, which have about 1 1/2" of bottom depth and about 2" of top depth, they stretch further than I thought they would. This purchase has been a great experience for me.
Related Products For Urbanest Adjustable Solid Zinc Curtain Rod Bracket Wall Holder, Fits 1-inch Diameter Rod, Brushed/Stainless Steel
