Prestige Medical Inflation Bulb with Air Release Valve, 1.7 Ounce,80-B/VA
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Bulbs are measured by their physical dimensions as follows Three 1 5/8" long by three 3/16" wide screws with a 3/8" screw opening. This may be of some assistance to you.
Pressing the bulb until blood pressure goes above the value on the meter can allow the valve to be opened.
You should be able to use it. In an anthropometer, the inflation device is the same regardless of whether it is used in conjunction with an extra-long pedi cuff Cuff with a large opening for the thigh.
Selected User Reviews For Prestige Medical Inflation Bulb with Air Release Valve, 1.7 Ounce,80-B/VA
Several applications were reviewed. I used it to pressurize my turbo wastegate to set it properly and check its range of motion. There was no problem handling 14 PSI on this thing, and I was able to control the bleed off valve well for my purposes, so the three settings could be adjusted to match. The set pressure is 25 PSI.
As a result, I had to adjust my technique to leave it slightly open prior to starting the machine so that I could In addition to these differences, the bulb was made of a higher quality than the original and performed as expected.
Replace it with a suitable one.
The inflation bulb may look standard, but it is on the smaller side of things. My only major complaint is the seam around the middle of the device other than that, it works as it should, even if it is built a bit cheaply for the price for which.
The company is not one I would order from.
Unfortunately, the valve could not even be tightened down far enough to boost the blood pressure up to 200MBHg, despite the positive reviews. There was too much air leaking It is my request to receive.
It was an easy I find it very helpful.