F1 Cleaner Low Voc

Yes, this version of Fujitsu F1 Cleaner is compatible with the ScanSnap S1300 / S1300i and a variety of other Fujitsu scanners. br>The cleaning function and abilities of all Fujitsu F1 Cleaner versions (historically, there were only two versions, but several different part numbers depending on country) are essentially the same. Fujitsu in the United States made the switch to a water-based system about 12 years ago. Because the previous type was alcohol-based, we decided to use a water-based solution this time. based, which caused issues with international shipping regulations.

The current formulation is not specified by Fujitsu. It's not isopropyl alcohol at all. br>Prior to 2001, Fujitsu sold an isopropyl alcohol-based cleaner called "F1 Cleaner."

Cleaning your scanner will not usually fix multiple page feeding or paper misfeeds, though it may help temporarily. The Pad Assembly and Pick Roller set are used by most Fujitsu scanners to pull paper through the auto document feeder. A Brake Roller, Pick Roller, and/or Separator Roller are used in other Fujitsu scanners. br>br>The Pad Assembly / Brake Roller acts as an abrasive in the ADF (auto document feeder), separating the pages. The Pick Roller, in conjunction with the Pad Assembly, pulls each page into the ADF by applying the proper pinch pressure to each sheet of paper, ensuring that only one page is fed at a time. If the Pick Roller or the Pad Assembly are worn, the proper pinch pressure is not applied to each sheet of paper, resulting in multi-feeding. Whether it's a misfeed or a feeding, it's important to Most initial feed issues can be solved by simply replacing these consumable items. Keeping your scanner clean will result in clearer images and reduce paper dust. Excessive dust will cause the Pick Roller, Pad Assembly, Brake Roller, and Separator Roller to appear worn and smooth to the touch, causing the roller to skip across the page instead of properly grabbing the paper. Excessive dust can build up inside your scanner if you don't keep it clean, causing it to squeak as the rollers move the paper through the ADF. Order a Fujitsu Cleaning Kit that includes all of the necessary cleaning supplies to keep your scanner clean.

We've been using this product in the office on a Brother DS700D portable usb sheetfed scanner. When scanning an ID card, a small amount of adhesive adhered to the sensor; this cleaner and the fujitsu cleaning cloth were able to remove the adhesive after about 10 passes. Other cleaners, according to reports, cause the rubber rollers to swell or crack. In response to your question, I believe this will work for you, though patience and multiple passes may be required.