Perixx PERIPRO-303 GLV Small Trackball, 1.34 Inches Replacement Ball for PERIMICE and M570, Glossy Lavender

The M570 that I bought it for works perfectly. In the past, if you wanted a red ball in your M570, you had to go through some hoops and come up with the story as follows TrackMan Wheel ball (same product as M570, but light grey in color) with a blue mouse and a blue ball from the Logitech Cordless TrackMan Wheel Red ball and mouse) improve Thanks for stopping by! If you find the cordless Logitech TrackMan Wheel, good luck! When I found one, I swapped it out, but the result was that my pointer speed decreased by a great deal. It was so slow in Windows that I had to crank it all the way up to get it back to middle-speed It must be faster than the ground pointer. Is there a reason for it to behave like The answer is I am not sure. A ball's material as well as its number or arrangement of small dots can influence its performance. It's impossible for me to say for certain. Here's a Perixx trackball to enter. With this option activated, your M570 will be able to navigate pointers at the same speed as its original blue trackball. You've got it!.

Lawrence Arias

| Oct 05, 2020

Logitech Ergo MX/Plus and Logitech M570 both use a 34mm mouse ball, so both of those should work with this one. As a result of the ball's acceleration, it's a little faster than the stock Ergo MX/Plus grey colored mouse ball. It is easy to scroll through the entire screen of an HD monitor without raising my finger The stock ball still can't quite cross the screen all the way, but it gets me 90% of the way across. This mouse works well with a Linux Mint system, and the acceleration settings from the Cinnamon Control Panel Mouse/Tablet settings work well with the precision thumb button without having to modify any configuration settings. There are other buttons that can be programmed with Linux as well. This mouse ball will appear very rich, slightly sparkly green when viewed in bright light. When light is low, the gray will be green, but it will not scream I AM GREEN like it does in the picture. My ball had a tiny spot of adhesive on it, but I simply wiped it off with a cloth a few minutes later. So if your ball comes to you sticky, rest assured it can be easily removed. There were no scratches on the ball when it arrived.

Abram Wood

| Jan 23, 2021

It is neither like the original nor like the copy. Honestly, it's hard to tell whether the glossy ball is better or worse than the original one. However, I have to admit that using the matte is not very pleasant. As far as drag is concerned, there is a lot. It is so loud while scrolling that it can be heard. The original may have been more accurate, but the rewrite is more accurate. There is no guarantee it will pay off. The red glossy is more effective than matte since it gives you the same (but better) performance. The second issue is that the matte often skips. Since it skipped so much, I thought the connection between the mouse and dongle was being interfered with. That was just the ball, as it turned out. The third problem is that in order to find the cursor you need, you have to scroll a lot. This is tiring and annoying because it is annoying because of the noise. I am not sure if it is the quality of the fitting There is only one good thing that I can say about the Matte ball, which is that its weight is close to how the original ball was. Unlike the glossy ball, which does not have a glossy finish. As well, the glossy version is much glossier than the original, as well as heavier than it originally was. As a result of the combo, drag is generated as well. The matte is not as bad as it was before, but it still causes its own problems, in its way. Learning to control this shiny ball has a learning curve, since you have to retrain your muscles. We feel a lot different now. Unlike the heavier original ball, the lighter ball moved effortlessly as if it weren't There's definitely a replacement and you're aware of it. It's just different, not necessarily in a bad way. - By the way, I am using the tracking setting on the glossy on its highest setting to compensate for its When I ordered these balls, I wanted relative accuracy, and that is exactly what I got when I set the tracking just a bit higher than the original ball for matte. Any higher and I would have lost it. My glossy copy will be kept. Over the next couple of days I will probably get used to it, but the matte is going Due to the fact that I purchased both balls on the same page, I am reviewing both matches in case Amazon doesn't let me review the glossy separately. I'll be brief For the matte, I have given it 1 star. I give it three stars because the glossy is loud, draggy, and stutters. You may find it a bit draggy and heavy.

Diana Gamble

| Dec 15, 2020

The original ball on my Logitech MX ERGO was pock marked by an accident when I dropped it, so I bought this replacement ball to restore it to its original condition. In the ERGO, the pegs sometimes caught the pock and caused the ball to stop moving, causing it to get stuck This is not enough to cause permanent damage, but it is just enough to make digital drawing a little more difficult, and it is Fortunately, this replacement ball took care of all that for me, and it has turned out to be well worth the cost. As the balls for the ERGO and the M570 are the same size, this ball can be used in either machine (I was using the ball from my old M570 in the ERGO while I waited for this one 30 days are required for replacement Another procedure is required that does not require specialized tools, although a pencil makes it a lot easier to remove the old ball. A choice of glossy or matte finish is available. Choosing the glossy in red was a wise choice for me. There has been no resistance at all and no catches during the operation. My ERGO hasn't displayed any difference in operation between this ball and the original gray ball it came with. The dark red of this ball actually looks a little nicer than the original silver ball or the blue M570 ball, in my opinion. As a replacement, this was not an expensive option. It has also worked well for me so far. I was able to get my trackball to work like it did before I damaged the original ball, and that was As a result of my experience with it, I would advise you to buy this ball if you are looking to replace the ball on a Logitech M570 or.

Santana Guerra

| Dec 24, 2020