wlaniot SO 239 Connectors SO239 UHF Female Jack RF Coax Connector 4 Hole Flange Chassis Mount Solder Straight for LMR-400 Coaxial Cable 2Pcs
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is possible to crimp the pressure tube after the center pin is soldered. It consists of one PL and one PL-L Connectors of the type 259 are mostly used for LMR400 RG8 9913 RG214 RG213 coaxial cable, so there are crimping tools for this type of cable as well.
A connector such as this one A dielectric type of PTFE is used Brass is the material used for the body A nickel coating is applied to the body PCB is the type of termination
There is a standard Coax connector on the back of the majority of mobile radios (CBs as well). UHF connectors are usually referred to as such in the industry. An SO-type connector is also known as a female connector A PL- 239 unit and its mates A box of 59 is installed on the coax feedline. *br> *br>The connectors you are asking about are designed to be mounted with four screws to the frame/chassis/bulkhead. It is important to be sure this is what you want to do with it. It is not the type of connector you want to use to connect an antenna cable to a radio, as you would need to plug it into the back of the radio. The female connector, also known as the SO-type, would be needed afterwards A PL- 239 unit and its mates This radio has a number on the back 259, on the back. A connector that is designed to attach to the type of coax cable you are using will also be required. You need to know the outer dimensions as well as other specifications of coaxial cable and CB radio equipment to ensure the devices are compatible.
The 90 Degree PL-D is a great one for your collection. The inner conductor of the cable is 0 when cut with a 259 male coaxial connector clamp, usually seen when cutting LMR400 coaxial cable. It measures 544 inches, with an insulation layer of A shielding layer of zero is applied to a 347 inch width. The width of the screen is 327 inches
Selected User Reviews For wlaniot SO 239 Connectors SO239 UHF Female Jack RF Coax Connector 4 Hole Flange Chassis Mount Solder Straight for LMR-400 Coaxial Cable 2Pcs
My plan is to bend 4 brass rods, thread the bent ends into four screw holes, and attach the bent ends to the threaded In order to transmit over a wave length of 1/4 of the length I intend, I will attach one more brass rod to the center contact and finally trim all 5 brass rods accordingly. (It is 2 It costs way less than $20 for an effective, cheap antenna. To build the antenna, you need six parts, two parts to make the mount, and a coax cable to connect to.
In my case, I wanted connectors the next day, but planned to buy Amphenol. Each connector accepts a male smoothly and without binding as they are both well-made and have tight tolerances. As for the material, it is quality PTFE and does not melt. It is gold-plated and well machined, and the center pin is gold-plated and does not melt either. The mag loop antenna I use with these is almost as good as the Amphenol ones. I am pleased with their performance. It is worth the money. The next time I buy, I won't hesitate.
The US built version ($40) I had used in the 1970's is no longer available. I found these recently while looking for some. It seems like they are quite well made. At this price, you should give them a try.
These SO-232 connectors met my needs. It is very nice to see the quality of these 239s. Voici our recommendation I think I made a good purchase.
We are very pleased with the quality of this product. The solder did not melt during the process. They are definitely worth buying again if I need more in the future.
The product has been well manufactured, and it will last a long time.
Their CB radio is great and I use them.
It was exactly what I needed to complete my project It is an antenna with a pole. With a 100 watt iron, the insulator didn't melt and the connector readily accepted solder.