TP-LINK TL-PS110U Single USB2.0 port fast ethernet Print Server, supports E-mail Alert, Internet Printing Protocol (IPP) SMB

You may have trouble setting up your system. As soon as it is set up under the correct subnet, it works without a hitch. There is a default setting of 192 for this product. A 10 to a 15 Routers that are set up for 192 are the most common. For automatic assignment, enter xx Networking can be a bit of a challenge for somebody who is unfamiliar with it. It is not simply a matter of plugging it in and having it happen. To fix it, you have to change the IP address on the computer to an IP of your choice, such as For a network to even be able to connect to it, you need to have 2. It is relatively easy to connect to the web interface and change the device to 192 once you have already done that. Both a Mac OS computer and two Windows 10 computers were able to use it (I used 128). It is recommended that you use a fixed manual address so that you do not have to retype it each time your network is reset. Once that is done, installation is a breeze and you need not install any divers As far as Mac Os is concerned, there are none. The ones that are used by the printer itself are not included. This is a 4 out of 5 with the somewhat tricky setup, which may stump the inexperienced user who is unlikely to know what a subnet is or how to change it as most network devices are plug-and-play. Aside from this, print jobs are timely, with no delay, and the printer behaves like a network printer instead of a USB one.

Elisa GODDARD

| Mar 06, 2021

My 15 year old Linksys WPS54G print server died and I needed to replace it with an unusual setup. A netgear router is my primary router for the internet, and the other one is a Netgear secondary router. Other than that, I use it as a switch to connect two laserjet printers - one colour with a built-in NIC card, and the other a B&W device. Again I had an old USB printer about 15 years old (HP1160le) that was hooked up to a Linksys print server that had As an acronym, TL-DR Setup of the PS110U was quick, and the printer is working as it always has. There are three computers that access this print server - two Windows 7 (x64 bits) and one You really don't need anything else other than the disc. In under five minutes, I got the job done with the wizard. The interface isn't ideal and I'm not sure if malware is installed, but it did the job. In addition to setting the i, you also need to set the d. During the installation process, you must fill in the IP address. If you skip this step, it won't Go back to step 1 and repeat the installation process - it takes about 3 minutes to install. It is set to the default value of I. There are 192 servers on this address. If this doesn't work for your router, you will need to change it.
At the point in the wizard where it talks about not setting a password unless you are an IT admin, this is where you have to do it. My mistake was that I thought this step was for setting the password, but the message indicates if you don't change the default IP setting to something compatible with your router, this is the step to do so.

Nala Faulkner

| Dec 07, 2020

This device can be used as long as you are able to complete two things. As a first step, set it up on your home router's IP range to allow it to access the internet. The second problem is that you will need to install a new printer in Windows (or I suppose on an Apple as well), as you won't be able to use the printer under its previous As part of the first part, there is an installation CD that allows you to change the device default settings to what your router's home network settings are. A majority of them have 192 characters. In most cases, X equals 0 or 1 and Y equals an unused number between 1 and on what else is on your home network, your computer uses at least one number and each other printer, computer, and other device uses one more number. There is also a need for this number to be unique and not already in use (Alexa, Tivo, etc). Hopefully your computer will detect your "new" printer, and the next step will be to let Windows (10) know about it. Unfortunately, it did not work for me. In order for Windows to detect an older device, I needed to instruct it to do so. We still can't move forward. In the next step, I selected "Print Server type with one ethernet port and one USB port" and was still experiencing issues. Since the release of Windows 10, I have been experiencing this problem. There is no support for my HP 1012 LaserJet printer in Windows 10. It has worked under XP, Windows 7 and Windows 8. So I suggest you buy a new printer since HP probably needs the cash. There is an easy fix for this problem. Set the HP LaserJet 3055 PCL 5 settings to fool Win 10 into thinking that the 1012 is a 3055, and it will be fine. Almost everyone will not encounter this problem with their printers at this point and will likely find that their printer is listed in the list of supported devices. You can now print a test page and everything is fine. The setup issues I encountered did not arise from the print server itself, but instead from not knowing how to set up IP devices on Windows

So far (less than a week), our household computers are able to print well. Since we have not done this yet, I do not know what would happen if two people tried to print at the same time.

Genevieve Franklin

| Jul 02, 2021

It was easy to install the TP Link driver on my Canon MF 4770n with Win 7 Home edition on my laptop

Make sure the computer can print to the printer when it is connected via cable, so you know the printer drivers are installed correctly. The printer must be turned off when connecting to the Internet and should be connected to the print server with the RJ45 cable. Also, be sure to plug power into the print You need to turn on the Run setup2/setup2 from mini disk for faster installation, or copy the files from the computer toward the end of the process. You shouldn't use CD File autorun2 if you copied the file to the computer. It loads a wizard that is slow, and once you pick TL-DR you get an error message In any case, PS110U will lead us to the above file

Click Yes to run the file, then Next on the wizard. You (10) Do not connect the router to the printer server, but the printer server to the computer! When you get to the point of changing settings, say yes to making the changes (admin with no password I think) and make a static IP of whatever (192). Please enter the necessary port number (like 112) and save. Now on your computer, go to File/Control Panel/Devices And Printers/Add A Printer/Add A Local Printer/Create A New Port Button/Standard TCP-IP The IP address for this port/type is Using IP address 112 (or whatever address you have selected for the static IP address) on this screen, select your driver and it may say that it exists already. It then asks "Do you wish to replace it with this one?". NO to replacing. * * * It should then be a smooth printing process.

Sierra Chapman

| Feb 24, 2021