HP JetDirect 610n Print Server (J4169A)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In order to be installed, HP 610N J4169A should be used with a printer with an empty EIO port. A simple approach to installing and setting up Followig is 1 - The network card must be installed in the available EIO slot, and the network cable must be connected. Then perform a "cold rest" or a "factory reset" of your printer. A configuration page can be printed out from the control panel of your network,*4- Your browser should show the IP address of the computer that is part of the same network that shows in the configuration page,*br>5- Entering enter will now take you to the HP built-in menu for this card, which will allow you to further adjust Thank you, SantechUSA
The 1300 will not be able to use this.
I don't think that will work with a 1320, Kenny. There is no way to use an external jet drive with this printer. Thank you, Ben
Selected User Reviews For HP JetDirect 610n Print Server (J4169A)
This was purchased to be installed in a HP LaserJet 8100 and a HP LaserJet 4200. The function is available in both units (as it is designed to work in both given that HP designed their JetDirect units and printers to work together). It was quick and painless to get them up and running on the network after I bought them used. They still had their original configurations loaded in them, but I only had one complaint they were still loaded with their original configuration when I bought them.
It was easy to install It only takes about a minute to remove two screws from the first I/O plate on the back of the printer, remove the plate, slide this unit into the slot, and hand-tighten the large screws at the end. The Cat5 cable needs to be connected, and you need to print the Network Configuration page, then use your web browser to find the IP address listed for the JetDirect on the configuration page, configure it, and you're ready.
As a result of this card's increased performance, the JetDirect 600n is no longer competitive. In addition to this, none of the web pages use Java. The transmission of my print jobs to my LaserJet 2100TN seems much faster now.
This device was bought quite some time ago, but it took me a month to install it. HP original products last forever, so it is good that this one is an original. The card is plugged in, the screws are tightened, the ethernet cable is plugged in, the printer is turned on, and you are ready to With no noise from my printer, the laserjet 2200d configured the card without any problems. My printer is equipped with the latest software, so before I print, I downloaded it from HP's support site, installed it, then finished printing. I was surprised to find that HP has improved the software. It found my printer and provided an option to make it permanent. Secondly, I encountered a problem at a customer's site last week. The HP print driver found a Samsung MFC in the network, and it was able to connect to the Samsung MFC and print from it. In that case, I would be able to save it permanently. The HP team is winning! *BEAR WARNING* *BUT*
*The ethernet connector did not "click" into place after being plugged in. You just need to make sure the Ethernet cable is inserted If you have a wire cover on your printer, it should keep the wires As it turns out, it is an inexpensive used network card (in fact, I believe it is brand When this card was originally released, it was worth more than $200. A one star deduction is due to.
In a matter of minutes after adding the new card and switching the IP number in my printer driver, I was able to print on my HP 4100n printer.
The JetDirect card I required in my LaserJet printer was available on Amazon, and I bought a "New" unit for it. I ordered the unit with ease, and it arrived early more than I expected. I have always been pleased with Amazon's service. The card was put in my printer and I followed the HP instructions for starting it up. It surprised me that it was a used unit rather than a new one. In the configuration, you could still find the settings from the previous customer. Before I was able to configure my network settings, I had to perform a complete reset of the card and printer. I have tried the card, and it works fine now, but if something is advertised as new, I expect it to be Although these are no longer manufactured and there are dozens of them on the secondary market, a new one should be considered a new one.
Many of us with older HP printers connected to networks are familiar with the inefficiency of these print servers. In addition, replacements are frequently ineffective. The vendor sold to me two items through Amazon, and I had previously purchased another item from him. In all three cases, the bags were electrically protected, and all three worked on install. I am happier with this vendor than my previous one who only sent one working item out of three orders and never sent replacements. the two cards had been configured differently when they arrived in the mail. I found it odd that they presented two different configuration pages. First one I'd never seen second one, I'd never seen As someone who has worked through HP's convoluted logic, I can tell you it is easy to figure out. I received the delivery on time The Amazon fulfillment service has helped me to be very happy as I use the supersaver.
An error 83 has been thrown. The return window has expired after the 0180 EIO 3 Error occurred two days after the return window closed. The figures. A day after purchasing it on Sept 19th, I had it installed a day later after receiving it on Sept 21st. All I got out of it was almost 30 days. We had to replace the buggy one with something that works but only prints a few pages.
This is the device I purchased from Amazon, but the unit has been hard to recognize I have contacted the vendor without any response. In the end, I was able to get the card to work by using some trickery. However, it only worked for about a year before it quit working. In the end, I had to deal with the seller alone because he wouldn't help. Previously, I have used HP products and have been happy with the results. The other card I just bought from a different vendor worked immediately after I plugged it in, I configured all settings, and it's now running smoothly.