DYMO 1750630 LabelWriter Print Server

Our company has two offices that remote to one another via RDP. Both offices need to print locally. With a Dymo 450 Turbo connected to a local USB port, both offices are able to print locally. Whenever things get slow, it tends to become extremely frustrating. In that case. A faster printing process is one of the reasons why we purchased this product.

The following advantages I will. - When connected to a local subnet, it works great, without any issues, and is SUBNETS CAN ONLY BE USED ON LOCAL SUBNETS. An awkward setup since you have to figure out its IP address in this case before changing it and either making it static or reserving it through DHCP. I will. - We had pretty good experience with customer service. They answered the phone promptly, gave us a straight answer with no waiting time. I will. - We cannot print to this device (or even ping it) from our second subnet, yet all other devices on our network can ping one another. These capabilities are not sufficient for us to use the device for its intended purpose. In our opinion, the website and application were not very user friendly. Therefore, we will be returning two of these units back to Amazon.

Jamari Tanner

| Apr 07, 2021

As soon as you set up the print server, click on the Print button. You should have no problems connecting your DYMO LabelWriter to your computer. If you're planning to use the DYMO printer with a computer or computer system, ensure your computer already has the DYMO Label Software (or DYMO Connect for Desktop). There were a couple of things that I wanted to point out. MAC addresses are listed on the sticker on the bottom of the device when you open it. Create a static IP address for the print server using your router's management page (192) for the best results. I recommend connecting Ethernet to your device (Server1 in my case), BEFORE connecting it to your network. By default, the static IP address for the DYMO Print Server is 192, according to the DYMO Print Server User Guide. Because that was already used by another IP reservation on my network, I assigned the IP To my DYMO print server, I added 3. Once this was done, I connected the print server to my label writer & created my labels. My router was connected, and I plugged in the AC It took less than a minute for all of the status lights to turn on & 192 was navigated to with no problems. The DYMO LabelWriter Print Server Web Configuration page (see examples) is accessible by clicking on step 3. The most important part of setting up the IP address is setting the IP address and I really didn't need to change a lot of options here It was my intention to modify the Description field of the server. The first result you see when searching Google for "Dymo Print Server User Guide" is the document you need - a PDF version of the setup guide. Avoid installing the Control Center software, since the same settings can be configured using the web UI (as explained My only use of the guide was to install the DYMO printer on my Windows machines, since the process was more difficult than on a After you connect the DYMO printer to the network, you will automatically see it when you click the + button on the Mac's Printers & Scanners application A screenshot of the window with the scanners (see screencap) - I changed the name and description When adding it to the location field, be clear about its location. the DYMO will not automatically be detected if you are running Windows Vista, and it must be added manually, thanks to instructions listed in the DYMO Print Server User Guide's "Adding a Printer in Vista" section these instructions still work on Windows 10 as well. Having a static IP address will help you avoid this problem - you can guarantee that the DYMO Print Server will always have the same IP address, regardless of whether its DHCP lease ends. In order to make sure that your computers are able to access printers on the network after they've been added, this is necessary. The short version In this case, you will need to install DYMO Label Software (or DYMO Connect for Desktop) on the computer or computers where the DYMO printer will be used. Find the MAC address of the LabelWriter Print Server (found on the bottom sticker of the device), and set a static IP address on your network (the best way to accomplish this is to do it through your router, not via the DYMO server itself). By connecting the printer to the DYMO LabelWriter Print Server over USB, your router through Ethernet, and your AC adapter via 10/100BaseT, you will be able to print to and copy from your DYMO printer. Use the IP address you just reserved to navigate to the web configuration page for DYMO LabelWriter Print Server - if it loads, it has been set up correctly - you do not need to make any changes. As a default, admin is set to "admin", and the password is "admin", so I don't recommend changing these unless you are on a corporate or office network. For instructions on adding or installing the printer on your computer(s), consult the Dymo Print Server User Guide. If you are using Windows 7 or 10, appear to “Adding a Printer in Windows Vista”. The server has been up and running for quite some time The software has been running smoothly from day one I can use it on my Mac and PC These machines run on Windows. Given the not-so-great quality of the film, we dock 1 star The simple setup process and outrageous price both turn me off, but I'm most frustrated that Windows doesn't automatically detect the print server during the installation process, like Mac does. Overall, it's an impressive set of figures Then-forget about it The device is of this kind.

Theo McGrath

| Mar 10, 2021

became tired of Dymo malfunctions constantly creating support tickets for the same stupid problems. In despair, I ordered a small print server so that I could try out this Dymo 450 Turbo and see if it would solve my problem. It has been two years now and I have never had a problem with ANY connected DYMO as a result of print servers. As of now, we make this a standard feature on all of our new dynos. Don't worry about it! It'll take care of itself! I like how simple the interface is to use. Through the web interface, you can change the hostname, password, and IP address if necessary, but after that, you can simply leave it alone and the system will work.

Layton POWER

| Dec 08, 2020

My computer has a 2018 MacBook Pro with Catalina, and only a small possibility exists that this will ever work on it. It's even impossible for me to install the latest Although the computer does come with a CD drive, I have not worked with one in a very long time. Additionally, you must hook it directly up to your internet with an ethernet cable like it is a REAL SERVER in a Virtual Server Farm like virtual machine. The size is about the same as a pack of high-quality gum The goal is to stop cigarettes, but they ask you to treat it like you are wiring it for Google, but the technology is from the 90s, when I was in college. Additionally, I bought a Dymo printer that was not wireless to go along with it, hoping to get it set up There is no Dymo software for that, so you will need to create labels in MS Word and print them out in MS Sierra. I decided to check out Dymo's wireless printer, as I thought it was an excellent brand. In order to connect to it, you need an IP address that is assigned to your network that is magically found and logged in as the administrator. Most likely, you will never be able to use those fine cutting edge features again if you change the default admin password. As a result, I have given up on finding a Brother Label Printer and am currently waiting for one. The time spent on this was a waste.

Zariyah Martin

| Jan 23, 2021

Those days weren't too long ago. It really IS a mess with Dynamo! There are bugs in the software! The Printers and Label Makers I get from Dymo won't mount on Windows 10 without Ethernet print servers. I had to buy those just to install Dymo Printers and Label Makers. I wasted HOUR after HOUR on Dymo label makers trying to fix them. My DYMO Label Writer Twin Turbo 450 Label Printer DYMO Label Writer Twin Turbo Label Printers unfortunately cost me a lot of money.

Madison Porter

| Jul 27, 2021

This is a small and functional device. CD was incomplete for set up. IT specialist needed to do the task. Only one page of the manual is present, and the contents of the MAC folder are My second contact with support resulted in me receiving the correct software and I was able to locate the installation guide on the Internet. There were no instructions for Windows Vista or 7, only instructions for Version 7. The first thing I had to do was figure out how to do Windows There was a problem with the Mac. My computer wouldn't work for the first few restarts, but then it started working. If I were you, I'd skip this and wait for a wireless printer to become There is no need to pay more than $40 for this box. The price is too high.

Kenzie Valentine

| Sep 24, 2020