Vimour Back Glass Replacement for iPhone X 5.8 Inch All Carriers with Pre-Installed Adhesive and Repair Tool Kits (Silver/White)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I would like to provide the following While I am not a professional iPhone repairer, I have worked on a lot of iPhones of all generations. Apple used thermoplastics in their products, and it was a big bummer You need to set glue to attach the glass back to the frame. Detection of heat You will not be able to soften the set as it heats up. As long as the old glass is removed, this kit is great. In this case, the camera cover does not have to be removed, as the opening around the camera is large enough. You can find a couple of methods on the Internet. Due to my access to a 1um wavelength laser scanner, I am in a privileged position. CO2 lasers that are 10um aren't ideal, because they can damage the glass, not the glue beneath. It burns only the glue after passing through the glass with a 1um laser. For either case, you will need to draw the lines on your artwork that show where a laser cannot travel Near the middle of the bottom and top of the device, there are some small NFC touch sensors. The process of breaking away the glass chip by chip is going to take a very long time without the laser. It would be nice to wish you the best of luck, but you need
The grey in space is the grey in space
There are all the inscriptions on this copy, and it is identical to the
The answer is yes, you can charge your mobile device. Regardless of the charge, fast or slow, it charges as fast as it can. The item was omitted from the list. Thanks for your kind words
Selected User Reviews For Vimour Back Glass Replacement for iPhone X 5.8 Inch All Carriers with Pre-Installed Adhesive and Repair Tool Kits (Silver/White)
I was very pleased with this back glass kit. To help with the removal of the old glass, they provided a number of tools, which was much As a result of using my hot air gun, I was able to control the exact temperature (270°C) at which the glass was heated. It would be great if it was easier to do, but the process seemed interminable. Even though I would not like to do it again, I am glad that my back glass did not get broken. Besides the double sided tape (to hold the phone down while you are breaking off the old glass) and safety glasses (I was wearing them as pieces of glass chipped off and flew everywhere), there are two essential tools that are not included. Photos are available for viewing. The new rear glass is glued on with 3M tape replacing the original, so I don't think this phone is water resistant at all, due to how it was attached. were to do this again, I would remove the 3M adhesive from the brand new glass and apply a thin layer of B7000 glue to the phone so that it becomes more resistant to water.
In order to prepare furniture for painting, I used a Wagner heat gun from Lowe's. A high and a low setting are available. There was too much high power and I damaged a very small pixel on the top right-hand corner of the This shows up as yellow and is very difficult to see, but I was kicking myself for going too fast. It took me less than an hour to remove all the glass from the back panel. Almost the entire thing was done with the scalpel, the glass was picked up and handled with tweezers once I got to the You need to wear gloves because things get hot and glass can come loose so you have to use As a result of the change, it will no longer be waterproof. I just pushed it down over the camera hole and lined it up. It fit absolutely perfect. I didn't even line it up too well, just put it over the camera hole and pushed up, perfectly Simple as that. This kit saved me $350 dollars so it was worth it to me. This is something I needed when I was turning in my iphone to a trader. They would give me $350 with the broken back, $700 without.
Let me start off by saying that the glass is great, very good quality, and a perfect reproduction of the original. I consider myself to be incredibly handy, have replaced many front screens on iPhones, and am very familiar Electronic repairs are something I do, but this is a different experience. Getting rid of the old glass is no easy task! I took my camera for two hours and now it's not working. YouTube will show you that many people lose Face ID and camera, while others get it back after a few attempts. I am waiting to see how things go for me. simply wanted to fix it so I could trade it in and would be fine for it.
I should note that when you take your phone to the shop for repair, it is not the glass that gets repaired, rather, it is A 2 out of 5 because I would NEVER do it again, a definite 2 out of 5. The nightmare that lasted five hours! You should be aware that this is not easy, quick, and may not work.
had originally purchased an iFixit camera cover, but it didn't have any text or Apple logo on it, and it could not cover the entire In this case, the part arrived much faster (Prime), looked like the real deal, and did not require the camera assembly to be cut off. This part only needs to be stuck on after the adhesive and glass are removed. Make sure you use enough heat to remove the glass, since it's a bit tricky to do. First, I found that the heat wasn't working until I raised it. Once I slid my scraper under the glass, the screen was clear. I am not convinced that this will be waterproof without sealing the crack in the opening with something, since the opening is slightly larger than the assembly.
This product is an exact copy of the original back cover for iPhone X.
Took me more than 2 hours to remove cracked The knife must be used with a heat gun and you may need more than one blade to complete this work. You will likely come across tons of tiny pieces of glass, so it is a good idea to wear gloves and eye protection. A good tip is to tape the front screen and side of the phone with clear tape two layers so you do not scratch the screen when you are working on the phone. I am very pleased with the outcome. If you scratch the edges of wireless charging, the camera features, the volume and power buttons, or any of those areas, your phone will display scratches.
I saved a great deal of money thanks to this glass. It is charging 20x more than what this costs by replacing your phone when a phone replacement is not needed. This glass looks the same as the previous one! Exactly what I was looking for to go with Yes, three to four years is a lot of patience and about two to three hours per day The process of changing it takes about three hours, but it is worth the time. As far as the supplied kit is concerned, everything you need is in the box except the heat gun and gloves to prevent cuts. I rarely give reviews, but I feel this deserves my highest recommendation.
Old glasses require patience and a hot gun to heat up. There is no defect in the new glass. The glass back was purchased to replace the one on the Compared with space gray, it is a little darker. I love the way it is It was a The adhesive used in this kit is a robust 3M adhesive. All tools are included in the kit. Caution some things to keep in mind. The first thing to be aware of is that removing the existing glass back will take a lot of time, and a heat gun will be necessary. If you do not prepare, you may have a problem handling your iPhone. It is likely that the glass will shard or break. The phone will be ready to receive the new glass back once the old adhesive has been removed, all edges and around the camera of the original glass are removed, and the old adhesive is removed and the back panels have been cleaned. As a guide, remove the adhesive backing of the glass back and fit it around the camera. It fits flush and as perfect as the glass back of an iPhone when it was brand new. It's a kit that's highly recommended for those willing to work. You should not adjust the glass in any other way since it is very.
Super glue used by Apple is professional grade and does not break down A total of 3 gallons of glue is applied to the piece of glass, It was difficult to use gloves and goggles while dissolving super glue with a heavy duty straight edge box cutter. The broken glass had to be removed over the course of several hours. However, as soon as he stepped off he continued as before. This is perfect. It looks like it just came from the store. Product of the highest quality!.
Related Products For Vimour Back Glass Replacement for iPhone X 5.8 Inch All Carriers with Pre-Installed Adhesive and Repair Tool Kits (Silver/White)
