CELL4LESS Compatible Back Glass Cover Back Door w/Installed Camera Lens, Custom Removal Tool & Installed Adhesive Replacement for Samsung Galaxy S7 - All Models G930 - OEM Replacement (Black)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As the backcover is meant to keep the phone waterproof, water shouldn't be hitting the adhesive if it's applied correctly
In addition to the camera cover, which is incorrect in the video, you will get the lens and the flash as well
I installed it in a G930P and I am not sure if it works
You will not be able to fit it. Each of these phones has a different size.
Selected User Reviews For CELL4LESS Compatible Back Glass Cover Back Door w/Installed Camera Lens, Custom Removal Tool & Installed Adhesive Replacement for Samsung Galaxy S7 - All Models G930 - OEM Replacement (Black)
Everything looks great in terms of fit and finish. By heating the old backing plate up to about 120 degrees F and using the provided tool underneath it, I was able to remove it. After repeatedly heating the phone and sliding the tool along the edge to cut the glue, I was able to lift the old backing plate off easily. I used a damp Q tip dipped in acetone to clean the remaining glue from the interface after removing the backing plate (and destroying it thoroughly in the process). Ensure that all adhesive pieces stick to the backing plate and not the plastic as you remove the plastic from the backing plate. A couple of them had to be glued back to the backing plate when they fell off with the plastic, but it was Setting up and installing the new backing plate was very straightforward, but taking off the old one was a bit of a challenge.
A YouTube instruction led me to this. There's a new heat gun in my house and it gets quite A little touch made the phone difficult to use. Oh my goodness. Prying the corner of the back cover off with a metal pry tool made the rest of it fall off without a hitch. My black sheet of paper also came apart from the cover, so I just pulled that off as well. My first mistake was to pull off the tape cover on the edge of this new cover while installing it. As the sticky liner began to come up, it was difficult to remove. I then pressed around the line in that direction with my thumbs. came off from the sticky just fine. Also, the large inside rectangle liner came off in the same manner. I was perfectly satisfied with the back cover. It looks great after I used the heat gun on it again a few times, pressed, and laid it under some books for quite a while. I followed a video on how to do that. It looks like it just came from the store. This update was made in June From a height of approximately 1 foot, the cover fell off the case. On the back of the phone, there are two cracks. After two years, I only dropped maybe 20 times on my original Samsung OEM cover. A single blow was dealt to this back. There is a difference in quality between the two. While it is hard to be sure, the cracks and shards seem broad spread for a more stable I won't purchase from this company.
The reason I gave it 4 stars is that it looks like the original color, but it's not OEM (Original Equipment Manufacturer) aka Samsung as the description claims. The face is blank and the Samsung writing is missing. Although the phone gets the job done and is protected from the guts, if you crashed your original while switching out your battery, this should work fine. I am unsure how well the adhesive sticks to the inside of the phone but an outer case and screen protector are always recommended. There is no better battery case than one made of titanium. To put it simply, it boosts your energy level by threefold. My frustration stems from the fact that Samsung, Apple, and others make the battery access so difficult. If you take care of your phone, it should last you 4 to 5 years if you take care of it as well. This is so lazy and or rich people who spend another 800+ dollars on a new phone. The battery and rear cover replacement for just 30 bucks (if you break a battery like me) is a fantastic deal!.
My only caution was not to overheat the phone. I had a heat gun to warm up the edges, but was hesitant to overheat it. Prior to heating up the SIM card and SD card, I would recommend removing them. It was a breeze to remove the old cover once the seal was broken using the flexible tool provided. Watch the video provided on the URL provided with the cover and you will see how this works. The only cover I would order is one that includes both the lens and the back cover. Invest a couple of dollars extra and you will save yourself a lot of Whether the adhesion will last will depend on how well it holds up over time. I had no trouble installing the back cover. Bringing the edges of the phone into good order by removing any adhesive that may still be there You don't need to be too meticulous. As you are removing the old adhesive and cleaning the edges, you might want to put a soft washcloth on the phone face At least for now, I can relax knowing my back cover is no longer broken. I was looking for one with a lens and tools, and even though there are cheaper ones, I wanted one with a lens. It would be nice to buy it.
I think whoever said the backs are easy to remove was just having a laugh. The backs all seem to crack lucky we still have them. There are two types of packages for mine, one is a wooden box and the other is a cardboard box. By looking at the contents of the wooden box, it is clear that it is older, as the seal on the box is so old that the glue on it has come off. You will have to use the supplied tool to remove the rest of the green protective paper after peeling off the green tabs on the glass. Taking care when peeling off the green tabs on the glass is essential. You will just tear them off on the sides. If you have trouble removing it, make sure you do it on the right hand side in the middle because the remainder contains adhesive. I don't care about the thickness as long as it fits well and the phone cases cover it.
I like how well-made the packaging was, and I especially like that the camera lens cover was already attached With mounted, I was able to install it much more quickly than I did with I also like how the fit is perfect, and it is stuck to the phone securely and quickly. Considering the price, I would not expect it to be very thick glass or a true OEM equivalent. Nonetheless, it seems to be a decent product. Plastic covers were used for the inside of the glued surfaces and for the inside of the plastic cover Take down. Due to this, it did not come off in one piece when you tried to peel it off. It is one of the products I would buy again if I were to replace it.
The quality is poor. I found installation to be very Almost a month after installing the glass, the back of the glass cracked. The original back glass was on my iPhone for over 3 years before it was replaced when the color film peeled off when I replaced the battery. It would be great if I could keep.
I broke the back cover of the original camera just above the lens. It is easier to replace the lens on this new cover that already has the glass installed than to replace the lens on the original cover since I have to remove the cover Even though the old cover was a bit difficult to remove, it did not crack as a result of the process. The new cover looks exactly like the original but when I gently pressed it on the table, the glass cracked a bit. As soon as I removed it, I noticed more cracks. The original cover did not crack after being placed back on gently. Thanks to my original cover I am able to preserve it.