Neewer 23.6 inches/60 Centimeters Carbon Fiber Camera Track Slider Video Stabilizer Rail with 6 Bearings for DSLR Camera DV Video Camcorder Film Photography, Load up to 17.5 pounds/8 kilograms

In a nutshell, Having done 5 sliders, this is the fifth one I've done. My Imorden 40", Ulanzi SL-140, was returned to Amazon because of their easy return policy With Grip Gear's Movie Maker, you can make movies with as little as 40 dollars. The Edelkrone Wing 3 as well as this one are both going with me. Below I've outlined three reasons why I prefer to keep This is *br1. Built-in quality is superb and there is no wobble (try to stay away from the ** 2. This is a short, lightweight device. In my opinion, 23" is more than enough to create great cinematic footages and I only think this slider needs one Make two tripods work. Try to move and setup some tripods to see how difficult it is. 1. 2. 3. The most important thing is that it's buttery smooth. In the track head and tracks there are no plays (some do, unfortunately). The slider provided by this program is much more effective than 3.

The Edelkrone Wing 3 costs five times as much Since the load is much higher, Wing 3 only produces an effective slide length of about 12". Here is the video I shot with the.

Connor Guthrie

| Dec 10, 2020

The quality of this product is really good The system is easy to use and built well. A shorter length would be my choice, if I had a choice. I rarely used the full range of 30"+ while shooting, where most cameras have travel of 75% or more. However, I faced a few challenges due to the longer length, even though it wasn't particularly more expensive I-n- d The transport of goods is harder. - Space is at a premium in small spaces - If you want to zoom in on a shorter subject, it is tough to keep the rails out of the camera's field of view A pan full of water.

Issac Blackburn

| Jun 17, 2021

Company that I highly recommend. It has just been taken out of the box and for a few minutes now. That is so awesome. Since I was a kid, I have wanted to have dolly tracks. Nevertheless, they were expensive. This is why I thought they were Company that I highly recommend. There was only one thing I was unhappy with to start with one rubber mount was missing and two looked so soiled they were coated in sand. However, I found an extra bag of rubber mounted in the pouch, so I didn't complain about that. I highly recommend it.

Atreus Fernandez

| Jul 08, 2021

In a nutshell, I paid $110* for the 100cm version of this slider. It is well worth the asking price. In spite of the price, the quality of the machine is higher than you might expect. There is no pro-opposition stance in the article The level slider is no masterpiece, but for my own personal use, I can put it to good use when I don't have access to my studios' It was just delivered to my house so I played with it for 20 minutes while the wife was exercising. The video shows how this works (see the With a Sony a6400 and a Sony 50mm/1 lens, I shot the footage associated with this post. Lens for any APS-sized sensor (Great lens for any Taking pictures with a Sony C Basically, I didn't make any adjustments in post-production. The video is untouched except for the clips being mixed together in order. My first time using the slider was only a few days ago, and I only have a few days of experience with it. I may update the review if I find out there are any durability problems in the future.

Liberty Clayton

| Jun 09, 2021

"Simpler is better" is the motto we live by. Combining this thing with the manfrotto 504 head results in a smooth photo. For weight, the difference is astounding compared to the slider I was using previously, which was made out of solid metal for cameras that were much heavier. Particularly when taking into account the price. Choosing the shortest rail size is advantageous if you plan to mount the monitor in the center. A long tripod plate is mounted to this with two screws at the base. The connection point becomes extremely stable as a result. With a price of $100, I can't imagine anyone would pass this up. I have found that a simple design is better when it comes to sliders. The lighter the system, the less likely it is.

Amelia Montoya

| Jun 12, 2021

Having used it for a few days, I am surprised by how well it works. There is a smooth movement throughout the video, which makes it look fantastic. It takes a bit of practice to get smooth video, but if you want 5-star footage, then you need to follow these directions This is actually quite easy since you only need to take nine seconds of footage. It is pretty close to the right length. It would be better to have 48-hours Using 60" would be too heavy, hard to balance, and difficult to transport. Instead, try 5-footers. It is necessary to put this on a tripod in most cases. With two tripods attached, it may actually work best with two tripods because of its length, but it may be difficult to move the whole setup. The only tripod I could find seemed to be too small since I never had a torso The leg of the slider must be within reach of the height of the table or countertop. When keeping 5 in mind becomes a problem The weight was 7 lbs. When the camera is at the far end of the slider, prevention of the camera and attached gear from falling over the entire rig is essential. The tripod is stabilized by adding weight above it, but then comes a second issue - the Sliders flex just enough as the camera moves to create a feeling that the camera is moving in I added support arms fixed to the tripod legs in order to fix the flex. The rig works, but now the entire set up is almost as unwieldy as using In order to prevent the slider car from moving, there is a clamp. There is a possibility that the clamp will damage the carbon fiber tubes, especially during transport. As it comes with a bag which protects the slider but does very little to hold it in place, the slider car is left exposed. It is best to use a plastic double rifle case for protecting the slider and securing your slider car. Hence, this slider can now be used more easily and transported more easily after spending an additional $90.

Harley Cameron

| Dec 07, 2020

The build quality is excellent and the weight is super-low. From my initial tests at home, it looks like a really solid slider. I have not tested it out on the field, but it seems good from my testing. A heavy camera + lens combination (D750+Tokina 16-35 f/3. 5 The number 28 f2 is an integer. This is 8) Though you could mount it on a single tripod, there is noticeable flex in the slider as you move it to the sides, so I would suggest you invest in a 2nd tripod or a pair of solid stands so you can mount one under each side for a completely flat surface. As for the 4 rotating feet, they are a huge plus, because you can set it up on a flat surface or let it fall on the ground in order to achieve The Carbon Fiber version is also much lighter than the Aluminum version because it's so thin. As a Neweer customer, I have purchased several photo and video products that I have been completely satisfied with, despite the fact that their products are cheaper alternatives to those from other.

Zoey Rhodes

| Mar 24, 2021