Astromania Anti-Vibration Suppression Pads Telescope Mounts - for Vibration-Free observing
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
On the Celestron ones I bought, there is "Celestron" raised in the top left of the orange material, right next to the "Celestron" brand name. Unlike synthetic materials, Celestron states that the orange material it uses is actually Sorbothane, which is specifically designed to suppress and absorb Even though the price difference may not be worth the chance, these appear to be constructed from the same materials. A problem with the Celestron ones is that the material stiffness is too low to support For Sorbothane to perform well, it must have a specific compression factor, and every stiffness level will have a different weight range. The total weight of these is probably only 10 lbs, so they're probably optimized for this weight The weight of the laptop is 15 pounds. Despite the fact that they'll probably still benefit all weight ranges in terms of reducing vibration, heavier systems will get less benefit. It was necessary to make these with weight ranges, like the Vibrapod pucks made for record players, which are made of 100% Maybe you should try a set of those if you have a heavy setup. a tripod can support 75lbs total. A tripod made of model 5s can handle up to 25lbs per puck (they come in a four-pack). The lower models are designed for lower weight ranges, so pick the model that will work for you and remember to have a spare left over as you will only use three pucks.
As a first step, it is quite hard to assess whether these things are effective. As for me, I'd be lost without them, and not using them would be no different than You shouldn't have to worry about your weight. Solid, hard plastic is used for them. It does not have any moving parts. The ZWO 294M and the mounting plates are used with a Celestron AVX mount, guide scope, Telrad, ASIair and ZWO 294M. Their rigidity prevents them from moving or compressing. I bought them 2 years ago, and they still look the same.
The width of these is about 3 inches, brother
As far as Celestron claims, this headset is made from Sorbothane, at least the orange part, which is a legit material designed specifically You can buy a four pack of Vibrapods for around $24 on Amazon if you search "Vibrapods.". Since Sorbothane needs a certain "squish" factor in order to maintain its properties, Vibrapods makes four models to suit the weight of your turntable. Two models can be used with model 1. For each puck there is a capacity of 5lbs, so 4 pucks can hold a total of 10lbs. There are 2 Celestron pads per model 2, so 24 pounds in total. The Celestron pads feel very squishy in comparison to my Vibrapods that I use It's my guess that each of the three Celestron pads can support a weight of 10 pounds The weight of the laptop is 15 pounds. My Model 5 pods are incredibly stiff, but they can hold 25 pounds each, probably more than Celestron pads. The Vibrapod Model 2 is definitely firmer as well as my Celestron pads.
Selected User Reviews For Astromania Anti-Vibration Suppression Pads Telescope Mounts - for Vibration-Free observing
I love how simple this is, and yet how powerful it is!! My reaction when I saw the pictures of these was, "wow, these are incredible. ". Pucks that have been dished are I'm sorry, but that's not good. I would not consider them to be. In this example, the dished part of the tripod's base can move around on its own, so it's positioned so that it's directly beneath the tripod's leg with the ground laying flat below it. I think it's an ingenious idea. Likewise, I did not feel I needed them under the tripod legs of my Celestron 9 telescope. This is a 25" scope, but what a difference in the amount of ground vibration it transfers! No, it isn't quite none, but it is close to it. Moreover, these cheap camera lenses are made by the same people in the same factory, so they are likely to be the same as the ones you know.
I found that it helped my mount in a big way. The german equatorial I have is an Ioptron ieq45 type. Having had vibration problems for a number of years, I decided to try these methods to smooth out the noise Adding a sheet of rubber under the legs, adding extra crossbars between the legs, tightening everything that could be tightened, moving the center of balance, imbalancing slightly, and hanging a small chain from the counterweight (this actually helped). ordered one and am now kicking myself for not ordering sooner. As a surprise, my high frequency ringing vibrations are no longer present. Other than motorizing it, nothing will help eliminate vibration from touching focus knobs, etc, but I was pleasantly surprised that the ringing is gone and my camera has been working fine. My recommendation would be to go with.
They are well-built and do what they are supposed to. There is no difference between these and the $40 celestron. They are very durable and well built. Buying these will save you a few bucks so you can spend them on more Astro gear.
It's a sure bet that they The IR filters are used with a Celestron C8 mounted on a SE GoTo mount with a single This mount can now be used with C8 at least. Now, the vibrations that occur when focusing can be tolerated. It's a bit difficult to use this mount with C8 without them. In my heaviest C8 setup, I use a Denk binoviewer with diagonal (which has a reducer and magnifier built in) and a So far, I have only used them on grass around the yard. I can't comment on whether they will work on In contrast, I have never used Celestron pads, so I cannot compare their performance.
A Celestron AVX mount and an 8-inch Newtonian telescope are used by me. In light of other accessories, such as a DSLR and finder scope, this would be a bit of a load for the AVX. The only option available to me when I forgot to bring these pads was to get a non-sterile Up to 30 seconds of exposure, a trashy photo can be taken. Even with just one person on the ground, we can achieve much more than we did before. I can wait for 5 minutes as long as the alignment has been properly manipulated. The vibration in the astrophotography system is the enemy of the astrophotographer. If you spend money, it has to be worth it. As a matter of fact, the value you get from your effort is far greater than.
The whole thing seemed like a scam to me. There was no way I could have been right. It's amazing how these things work. I have used them for tripods set up on pavement a couple of times already. In addition to counteracting vibrations caused by the tripod and when moving the scope or camera, they also counteract vibrations caused by the camera or scope. Likewise, they also counteract vibrations resulting from nearby cars or people. As well as helping with light winds, they aid in reducing noise. winds this afternoon. They will not counter a tornado or an earthquake, but they are effective at eradicating a few little irritations. This is definitely a company I recommend. The prices of these ones are half the price of the Celestron.
Keeping vibrations to a minimum when viewing is achieved with the help of the pads. During the setting up of the telescope, I did not realize there were so many vibrations.
The telescope would be less likely to vibrate from wind or gentle touches. intensity of the image stabilizes about a half second or a second faster than normal. While I do prefer square pads that don't roll away from me, I find that they are more difficult to sit on.
Related Products For Astromania Anti-Vibration Suppression Pads Telescope Mounts - for Vibration-Free observing
