DIYmall VK-172 VK 172 Gmouse G-Mouse USB GPS Dongle Glonass Support Windows 10/8/7/vista/XP/Raspberry PI Vehicle Aviation Tracker (Pack of 1pc)

I was able to get a lock with little difficulty and hang it out the window of my apartment in a downtown area where good reception is difficult to come by. It's running on a Raspberry Pi for me. br>br> /dev/ttyACM0 is the device name that appears automatically. You have the ability to perform a tail - After you plug it in, you should be able to see the NMEA output. Here are some steps to follow if you want to use it as an NTP source: br>br> br>br> Update sources with sudo apt-get updatebr>br> Install the gps daemon, libraries, and NTP with sudo apt-get install gpsd gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-gpsd-g python python python python gps ntp to install the gps daemon as well as the ntp serverbr>br> edit the gpsd config filebr>sudo vi /etc/defaults/gpsdbr>br> These explicitly name the device, and NTP will not work without them. nbr>GPSD_OPTIONS="-" DEVICES="/dev/ttyACM0" n"br>br>save/quit the previous, then sudo vi /etc/ntp to edit the ntp configuration file. confbr> In ntp, add these lines. conf: gpsbr>server 127, gpsbr>gpsbr>gpsbr>gpsbr>gpsbr 127 0 minpoll 4 maxpoll 4 preferbr>fudge 127 fudge 127 fudge 127 fudge 127 fudge 127 fudge 127 fudge 127 0:1:0 Save/quit then rebootbr>br>Once that's done, type: 000 refid GPS stratum 15br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>b cgps - cgps - cgps - cgps - s
. and see a full-screen display of the GPS trying to lock or locking up. If you get a timeout, double-check your work and connections. br>If NTP is working, type: ntpq - ntpq is a ntpq is a ntpq is p
. and a line like this will appear in the resulting text: *SHM(0) *SHM(0) *SHM(0) *SHM(0) *SHM(0) *SHM(0) *SHM(0) * GPS. 15 l 14 16 377 0, 15 l 14 16 377 0, 15 l 14 16 377 000 3. 505 3. 556br>It is not working if both "poll" and "reach" are zero. br>br>I hope this information is useful!.

London Winters

| Feb 03, 2021

You have the option to purchase eight. This turns out to be the Wild West, with many products that don't work at all, some that appear to be fakes, and a few that work perfectly. I tried a few with integral antennas in the hopes of finding the perfect one, but none of them perform as well as this one. I conduct all of my testing on my kitchen counter because they will all work reasonably well outside under ideal conditions, and it's more difficult to detect the few decibels of difference that might matter in more stressful real-world conditions. This receiver was ready to use right out of the box. 2 minutes of 3D tracking of a large number of GPS and Glonass satellites, followed by 3D/DGNSS SBAS tracking. This is fantastic. br>br>Whether it's in the middle of my house or near a window, this receiver averages around 3 dB. With a precision of 5m and a score of 7, it's possible to achieve a score of Short-term deviations of 5m. This module is the lower plot in the attached image, and I believe this is a worst-case scenario-type scenario. It was pretty blind to half the sky on a window sill facing South, whereas in my kitchen, it had weaker signals all around but some through windows in all directions (note that the deviations are much smaller East/West, rather than circular as in my kitchen). Many modules perform far worse than this, and this is by far the best. What a little gem this module is, top performance with the included antenna, flexibility to change to a different antenna or use a longer cable to remotely control it if desired. These two, almost identical, are the next best performers: br>br> br>are fantastic; they always come up super fast and quickly transition to 3D/DGNSS, booming signals, and tight tracking- in my kitchen, which is on the second floor and has a two-story blockade above it. When compared to the "DIYmall Micro GPSV5 GPS Module GNSS HMC5983 Saw LNA Triple Band Antenna ANT," the "DIYmall Micro GPSV5 GPS Module GNSS HMC5983 Saw LNA Triple Band Antenna ANT" performed slightly better. Because the antenna was similar in size but not as close to the laptop, side testing was possible. This was the best module with an integrated antenna: br>br> is the top receiver in the attached performance plot; it's not quite as good as this one, but it's still impressive given its size and weight. br>br>While most of these receivers come with little documentation, they all have silkscreen markings that show you how to connect them. The only clue was a red wire (with five black wires)--I'll mention this receiver because it had no markings and no easily accessible documentation. Because the red wire isn't connected to anything, I'm pretty sure I blew it up. It's a shame because it appears to be genuine and well-made, but buyer beware! Finally, don't waste your time with the Adafruit "Ultimate GPS Receiver," which was one of the worst performers of all (more akin to a Ublox-style GPS receiver).

Griffin Floyd

| Jan 12, 2021

On Windows 10, it works fine. On my Venue 8 pro, I was able to use the Microsoft Maps app for navigation. If you want to use any modern apps on this GPS with Windows 7, 8, or 10, make sure you download and install the "ublox GNSS Sensor Driver v2. 21 for Windows 10 and Windows 8. 1/8" x 7" x 1/8" x 1/8" x 1/8 a "u-" is a "u-" is an "u-" is an "u-" is an "u blox 7 GNSS", also known as "blox 7 GNSS", is a satellite navigation system developed by blo "UBX- You can and should use the drivers directly from the chip manufacturer if you have a device based on the G7020. (For more information, see the link above. ) )br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>br>After installing the drivers, plug in the GPS and wait for the green light to On my first attempt, it took me about 10 to 15 minutes. It now starts up from a cold state (being plugged in) and gets a location in about 5 to 10 seconds after the first lock.

Rosa Shepherd

| Sep 22, 2021