WINDCAMP AP-8 8port 40A Connector Power Splitter Distributor Source Compatible with Anderson Powerpole (AP-8)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The connectors used are standard PowerPole TYPEs but aren't genuine PowerPoles. In any case, they work with the genuine PP connectors just fine. It has a Yaesu 857D radio on it, a MFJ tuner, etc. and is a great little alternative to some of the more popular-looking products. In addition, they are more expensive This is a different version from the one sold by the other
When only the blown fuse indicator is connected, if the power indicator is not present, the device does not work
It does have two rubber pads attached at the ends of the flat bottom, measuring roughly 3/8 inch wide. You will receive two 1 x 1 devices with the unit. Three 75 inch sets of 3M Dual Lock self adhesive tape with markings on the bottom where they may be attached. Dual Lock strips may easily hold the unit in place regardless of weather conditions if it is not subjected to bad weather. I am very impressed with this unit's quality.
Even though Carlos and Carl have made very good comments, the original question lacks too much information to ensure Specifically, the Windcamp Distribution Block, which I am sitting in front of, is designed to distribute up to 45 Amps of 12 volt electricity (the input) to up to 7 fused circuits (the Additionally, it is designed to use Anderson Power Pole connectors, which you may have to install to all the wire ends, which means that you will have to buy the connectors and the crimper ($65+) at the very least, just To get back to the electrical aspect, we need to know what the current (amp) draw/load is for each blind set he wants to operate at the same time, or if it is a single blind that he would like to operate. This information is all accessible at many websites that deal with electrical issues, specifically those devoted to low voltage. *br>I encourage the caller to contact a Low Voltage specialist in the area or to hire a real electrician before proceeding and potentially causing damage to the residence. I am Dale, N0PEY, ham radio operator, and I am happy to help you.
Selected User Reviews For WINDCAMP AP-8 8port 40A Connector Power Splitter Distributor Source Compatible with Anderson Powerpole (AP-8)
Built nicely and with Power Pole - The unit is a pleasure to use This kit includes connectors and cable boots compatible with PP connectors, which is nice if you don't already have a collection. The set also comes with fuses, including some extras. Nevertheless, as others have already pointed out, there is only a small selection of 5A and 10A fuses, while the rest are up to 40A. It would be fine if the unit could handle that amount of power, however, I opened up the unit to see that it does not use a solid copper power distribution block like more expensive units do. As this unit is connected to everything through one board, we have to question whether this is a good solution for multiple circuits that require 40A fuses. Additionally, unlike more expensive name brand power distribution blocks used in Ham radio, this unit consists of a circuit board attached to a series of connectors, with no RFI capacitors on each circuit to prevent RFI, as is the case with the more popular brand. For RFI-sensitive applications and high power usage, I would advise against it Although this would not be appropriate for sensitive applications, I think it will be appropriate for distributing power to a number of low power items.
A good price for each port can be obtained, and the construction is of high quality. In any case, it's quite the surprise to open the box, since there's a double set of fuses, 3M dual-window tape, a fuse puller, and a fuse You will also receive a complete supply of power pole connectors (30A and their housings) that you may use to terminate your own connections to plug into the unit, and some elegant The port is on-site, and the area is very attractive The build is not up to par As a ham local to my area, I built my own (K9JEB) and while that was a fun soldering project and it works, I value my time enough to purchase more Windcamp units in the future and cannot help but recommend the same to my friends and family. In terms of my rating, I would have given it a 5 I would give it a four star rating if I only received the distribution board and the required fuses, but the extras also give me a warm feeling of supporting the maker,.
Having a full selection of connector ends (both the plastic and the crimp connectors), as well as a set of black plastic end covers, and an assortment of spare fuses, was not what I anticipated. Originaly, I had decided to go with an alternative brand I didn't need/want the screw mount flanges of that very capable brand for my intended use (portable Elecraft KX3/PX3). This unit looks and feels great and works well - much better than my old one. There are several items I would like to purchase from that vendor, so I plan on buying them all.
I choose this distribution block because it is compact and looks well made, so it should fit nicely in my radio goggles An envelop. Having not opened the case to see how it's constructed, but having connected all the components to the block and having power flowing to everything without issue, I cannot comment on how the internals are constructed. With the help of a voltmeter, voltage can also be accurately measured. It is important to note that these are not It looks like the connectors are virtually identical, they are of equivalent quality, and I had no trouble connecting them to the generic connectors I had installed. Several types of fuses have been installed in the block, along with additional replacement fuses that are the standard style blades commonly found in automotives. Besides the fuse puller, they also include a battery charger. As compared to the cost of a comparable product sold by a different company, this set is a bit more expensive.
I can't believe what a difference it made to how my wires looked The user interface is simple and intuitive, which makes it a breeze to use. The software needed to enable me to switch between connected and disconnected modes I was able to accomplish my goal this way. There is even a fuse for each socket. As a bonus, you get an extra fuse in case you need it. I don't believe there will be any problems replacing them since they appear to be common auto fuses. As a result of my fondness for this item, I am thinking of buying another one for my other radios.
I use it in my ham shack and it works well. You provided a lot of extras for me - I really appreciated it The mounting kit can be mounted with velcro and spare fuses are included! This is a great product, and it is much cheaper than some other brands. I bought another for my office. The velcro is incredibly strong but I was worried it would fall off, but it does not. There is only one design I wish was available in a horizontal setting (I usually mount them on top It takes a lot of effort for the power cords to loop behind the desk and then return up to the radios from the top.
The customer service is terrific. A number of metal connectors were missing when I installed the product. The QSL card that came with the power splitter gave me the contact information for the person on the card. After a few emails later, he told me he would send me the missing parts and I received them within a week. The experience was extremely awesome. There is no doubt that this product is worth trying.
This unit is really nice! You can now use your Ham Shack off grid since the power supply charges the batteries when you are using it. After mounting the solar panels, the backup power supply will be all that I need It was great to see all those extra connectors and fuses on the product. This is great news!.
Related Products For WINDCAMP AP-8 8port 40A Connector Power Splitter Distributor Source Compatible with Anderson Powerpole (AP-8)
