Multicom1080P Component/HDMI Digital 200 Encoder RF Modulator J.83B QAM, ATSC, ISDB-Tb, and DVB-T Output
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It's not clear to me what you mean. Would you like to know if your sound is not syncing with your From where do you get your signal? There will always be a lag if you watch modulated content on one TV, and then you have a direct connection to another TV. The signal must be converted, broadcast, and converted again once it has been broadcast.
My apologies if my question was unclear. You should be able to use the encoder as long as the device you are using outputs composite at 480 or higher. If your screen resolution is below 480, your computer may not
My apologies if my question was unclear. In response to a similar question previously posted, we have provided this answer It is likely that all ATSC-compliant tuners should work with the modulators because they are built to the ATSC specifications. Any deviations from the standard by manufacturers will mean that any potential incompatibilities will not be anticipated. If the AC-DC converter is connected to a digital device, the audio output has 3 choices of audio modulation The tuner not being used does not recognize 3 as an input.
A 1X2 reversed CATV splitter is what you will need if you want to combine the output of the modulator and the input from the CATV. As an additional precaution, if you run into interference from existing channels or noise, it may be best to get a filter so you don't get interference from a regular CATV feed if there aren't any
Selected User Reviews For Multicom1080P Component/HDMI Digital 200 Encoder RF Modulator J.83B QAM, ATSC, ISDB-Tb, and DVB-T Output
The item has been with me for 2 weeks and I have had no problems with it so far. At the moment, ATSC is being transmitted on virtual channel 60 on channel It is a mix of traditional broadcast TV (virtual channels 19, 51, 56 physical channels 15, 20, 22). There are five TVs hooked up to my system. The channel is displayed as 60 on 3 of them. 1. (correct in accordance with the VCN settings). In both of the other TVs (both Insignia), 60 is shown. There is no limit to the number of subchannels on ATSC (I thought there were 99). There is an otherwise unexplained "Program Number" setting on the modulator that seems to be responsible for this number.
Have been searching for an affordable digital modulator for quite some time. It has been matched up with my OTA antenna using a Coax Distribution Panel from Channel Plus, but the same thing can be done using a *I currently feed it from a Roku player and it comes in on channel 50- I have it on every TV in the house with excellent picture quality and excellent sound quality. The Tivo Edge is the only device that can pick up streaming channels and pause, rewind, and record them much better than any streaming DVR could ever dream of. My first MUL-100 seems to have been destroyed by fire so I think I'll need two more The HDENC brand Among the 100 modulators, one transmits the Tivo through the house and the other protects the security system.
The video quality is poor and the audio doesn't work on either of my TVs since AC3 audio isn't available.
It is great to have a It worked with all of my sets except one. I set it up for ATSC and it worked great. (The oldest digital set does not support MPEG 1 or Every set looks as good as the source video when the bitrate is high. It is a highly recommended modulator due to its low cost.
My opinion of it was so good that I purchased one The HDMI output of my Class A motorhome is fed to my HDMI output DVR that, in conjunction with the antenna, allows me to watch on both the living room television and my The DVR can be viewed from the bedroom now!.
The web interface makes it easy to set up. Separating the RF number from the channel name allows setting the channel number one at a time.
Recently I've been searching for some cost-effective modulation solutions, especially when needing to modulate multiple signals at the same time. According to these reports, the unit seems to be in good working order. The rack dissipates very little heat, and the programming interface is quite good. I would recommend it for most installations with a single or multiple units.
I am very pleased with it. This is a very easy setup. I really like how easy it is to use the web interface. I got up and running in less than five minutes. A PMI Encoder failed after five years so we used this to replace it.