Dynex WS-007 - RF Modulator RCA/S-Video to Coax Video Converter
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The ability to connect new components to either S- or USB ports will make life much easier *br>Connect the VIDEO or the (Video & Audio) cable to an older TV that does not have the connections (older TVs that have only Coax as an LD I hope this helps. I don't know how to do it, thanks for your help.
There was nothing I found useful about this item. Since it doesn't work in reverse, I'm not sure if it will work. It's my bad.
Due to the fact that I was unable to find a cable to connect it to the television, I was never able to get it to work during that time. own a DVD player and VCR combo, you do not need this modulator. Directv receivers are available with component inputs, so you can run a component cable from the "line out" on the back of the TV to the "component in" on the Directv receiver.
Selected User Reviews For Dynex WS-007 - RF Modulator RCA/S-Video to Coax Video Converter
A nursing home wanted to make a channel inside their facility, so I purchased the RCA RF Modulator. With up to 200 feet of cable and 50 TVs, the system did not work. There is nothing special about it, just a perk This unit runs at 75 ohms or 1k ohms and has an amp setting. The shielding on this one is better than the one on the RCA.
In the spare bedroom, we have an old tube TV. A second receiver posed a problem for us when we switched to satellite TV recently. The cable was only sent into the TV, and there was no coax out. When I searched on Amazon, I discovered the Dynex WS-1000 Hooking it up was no problem for me. Choosing the channel on your TV can be done by turning the dial on the back of the Dynex. Check to make sure your TV is tuned to the right Your composite video (yellow plug) or S-video cable is connected to the composite video input. Connect the video input to the Dynex on the back. Be sure to have the audio cables (red and white) with you. From the Dynex, connect a coaxial cable to the tv and you are good to go! During the last six months, the picture has always been clear, and no problems have occurred. You can adjust the ohms with a switch on the back. Occasionally, you might find that your picture isn't clear if you use the yellow video plug. If this occurs, try flipping the switch to the other option. When you find this device, it's invaluable. Little devices like this can be hard to find but greatly useful when you do. Dynex is known for its high-quality products.
I bought a ROKU LT on Black Friday before looking at a TV my parents gave me that had been in their RV and was never used. It actually arrived EARLY, which is good since I was planning on going out of town on the day it was supposed to arrive. An old TV with no RCA connections and had only an RF connection (antenna) is very hard to repair. It was on Amazon, because it has just about everything, that I saw it. The ROKU LT works with it as advertised. After chatting with the ROKU support, they said the unit would not work. However, knowing electronics a little like I do, and other reviews, I took a chance and bought it anyway, There are no problems setting it up, and it works beautifully.
The box might be new, but it could also be old as someone dug it out of the trash and stuffed everything back in. I am open-minded- The box means that something has been I was surprised it had been left to sit on the dusty shelf for so long. I have been working on the shelf of a seedy mom and pop store for 20 Plugging it in with my breath held, I pressed the button. I was able to put it into action. Despite the red flickering on the TV, the sound seemed to work well with an XBox 360 and the picture seemed fine. got the best price on Amazon, but I still expect that new means new on Amazon! Do not sell unusable merchandise, it isn't my problem if a seller (phopepdx) has difficulty shipping it Don't be fooled into thinking you can put that box on the market as new. PHOPEPDX should be avoided at all costs. They will not be doing business with me in the future.
I received my order on time, it was reasonably priced, and it works perfectly. This is how it's connected to me To connect the converter to the TV, a coaxial cable is used. Through an S-video port, the converter is connected to a DVD recorder without a tuner A red and a white connector is for video and a red and white connector is Video and audio signals from the DVD recorder are provided by the Verizon Fios receiver via the red, yellow, and white audio/video cable. In this setup, a DVD recorder was replaced by a tuner and coaxial cable. I had to replace that unit when it In comparison with what I had previously, the picture I am getting from the converter is much better. I was initially getting Wavy lines in the picture, but that was a loose connection on the coaxial cable. In the future, I would purchase from this vendor again and recommend them to my friends.
What a great product! It does what I wanted it to do and does it beautifully! By splitting the signal from my satellite converter box, I had been running a second TV from the den to the kitchen. My next step was to install an HD box. I am no longer able to watch TV on my kitchen TV. Despite the fact that it 'just wouldn't work' with this new box, the installation technician said. It was then that I realized why I had to pull the converter box out. In this case, there was no plugged-in coaxial cable. Unlike the old HD program box, this new HD box has only RCA component and digital outputs, no The old converter box I purchased had both coaxial and line outputs on the coaxial outputs. After researching and reading about splitters, etc. , on Amazon, I realized that I needed a splitter on the cable box lines, then run to the modulator, then to the RF Modulator arrived via Amazon just a few days after order, and I received line splitters shortly thereafter. It worked as I wanted as soon as I connected it up. I didn't actually expect it to work as well as it did. I was thrilled with how it turned out! As much as I could tell, I thought I would lose the signal and get a weak, or even gray On the old kitchen TV, I get great video and audio reception just like I do on my main HD TV. My knowledge of different splitters and coaxial connections came entirely from reading about them on Amazon. I'm by no means an electronics tech, so I relied on this advice only. was amazed at how fast I was able to install and play it. It would be nice if everything were as easy as this! In my stereo cabinet, I have a black modulator box with a red and green light to indicate when the power is on, as well as when a signal is being received. It's also worth noting that RF Modulators from Radio Shack and other electronics outlets cost over three times as much as the one from Amazon, when shipping is taken into account. This is incredible!.
This has been my primary connecting method for my DVD player, computer, and occasionally my laptop to my television for just about six months now. Although the picture looks great, there have been no compatibility issues. However, the cable signal definitely becomes weaker as a result. While most channels appear fine with a direct connection, there are some that show some static when the cable runs through the box first. Overall, it is the best option I have found for basic modulation (after a lot of searching). I think that having an S-grade is very important Thanks to my new video connection, I can now watch videos smoothly.
This will work if you want to record from your current HDMI/HD cable box to your VCR. Using your old tv in the basement to entertaining the garage is also a good option. You can run some coax out to the garage, and your old tv will be able to connect. As long as you watch what you receive on your cable box, this should be sufficient. You can run off and have fun on the other side of the splitter.