Motorola MoCA Adapter for Ethernet Over Coax, Plug and Play, Ultra Fast Speeds, Boost Home Network for Better Streaming and Gaming (1 Gbps (2 Pack))
Score By Feature
OveReview Final Score
Questions & Answers
A MoCA technology evaluation is under way. If you would like to discuss it further, our sales staff would be more than happy to provide more details if needed. They can be reached by calling 888-875-8555 It is 753-653
In the current generation of Fios routers, Moca 2 is NOT bonded. There is no limit to speed, however, so it is around 400 mb (300 - 340 Mbps real bandwidth). Moca 2 bond is the only thing you need. A Fios device connected via coax into the house from Fios (by connecting the adapter over ethernet to the Fios router as well as via ethernet WAN port on To connect through Ethernet, you need additional adapters at the endpoints. MOC2 is a Bonded MOCA. There is a network bandwidth of 800 mbps (700 - 740 Mbps real-time You can't get full speeds to devices behind moca adapters if you have gigabit Fios and use moca anywhere. The new MOCA 2 should be ready by the end of the year. That can be done with 5 adapters.
There is very little chance that RG- will survive MoCA will be carried on 59. My recommendation is to at least get In MoCA, the frequency is extremely high, and in RG- the frequency is very low High frequency is not a good application for 59. For buildings that are close to one another, Ubiquiti NanoBeam AC is a good choice A range of a couple of miles can be achieved with 19dbi if your line-of-sight is clear I see. There is a need for some technical skills - Here's where you can find instructions for setting them up. They're cheap, too. You won't need to worry about lightning taking out your network gear if these things are taken care of.
It seems to work for me. It is converted back into a cable signal by the ethernet port input, and it is then sent out via Once this data is converted to Ethernet, it will be sent throughout the house's cable system. After that, you will need a second MOCA adapter to decode the cable signal and convert it back to ethernet, which you can then connect to your Smart TV, Roku, Switch, laptop, etc.
Selected User Reviews For Motorola MoCA Adapter for Ethernet Over Coax, Plug and Play, Ultra Fast Speeds, Boost Home Network for Better Streaming and Gaming (1 Gbps (2 Pack))
As a preface, let me tell you that my installation isn't the same as some. before I get into the nitty-gritty, let me tell you what I mean. The gritties. Yes, it's very easy to use and install, and I have rated it 5 for both. Worked for me. Well, sort of. I am disabled so my router is located upstairs, where it normally would be, with the connection to my brother and my father via cat5e as it would be via a normal connection. However, I am confined to the lower levels. My experience with wifi after the accident wasn't good enough to allow me to play games. I don't like Verizon's bad router and poor purchased this MOC set of two to replace the Fios g1100 router with my own asus rt-ac86u and replaced the MOC cable with the Fios g1100 router. In order to inject moca into the network, the router has a LAN port that goes to one of the moca boxes. From there, the moca signal goes into the coaxial cable. In my downstairs living room where I now live, the living room coax enters a two-way splitter and one connection goes to my TV set top box, the other to my second moca box from this kit, which is connected to my computer. Take a step back and let the story unfold (like a story book). It has MOCA 2 (yay) on FiOS G1100 routers. This is the only part of the box that is NOT bonded. Your set-top box has access to TV Guide and On Demand without having to use a wired As of that time, I owned an Actiontec ecb6000 (moca 2), but I've since upgraded. My fios g1100 supported F0 or NON-bonded adapters, which gave me maximum speeds of 400/400. My connections aren't too bad either (but I have gigabit, which usually nets 880/880 and 920/920 on an average Moca 2 was a better upgrade for me because I wanted more speed. This bond has not been Fios routers are limited to 2 Mbps in the home, so there is no point in upgrading. I had to discard 0 because it was not bonded. I'd like to return to the main story line. My initial speed was about 600/600, which isn't too bad, but I was still not reaching full speed. To cut the long story short, I thought the one moca box near the router had Suddenly, the power went out in just that hallway/computer room, and the adapter wouldn't connect to the network or to the According to the instructions, the reset switch needs to be pressed for 3 seconds for the box to reset to factory settings. The situation did not change. Initially, I thought the power had gone out. As a result, I buy ANOTHER box (this time from Microcenter, which sells the same boxes at the same price as the retail store). Now I get only 150/150 when I hook that box to the fried box location. There has been every sort of troubleshooting I could imagine. There was nothing I could do to fix my problem. When I attempted to log into the boxes themselves, I tried to change the Moca channel frequency (from 1150 to 1500), but it did not There's no way to change from 1150 to a different frequency, and the boxes refuse to accept any other Moca sets require you to be able to do so (despite the fact that they are a standard). So I contacted Motorola with an They suggested I remove the motorola boxes, reset the main box, and then turn on mine down here. After some back and forth, they suggested I reattach the set top boxes. I went ahead and did it. It took me over an hour to separate all three coax leads from the set-top boxes (well, I only had to do the main one here, the others must have been done In the meantime, while my computer box was off, I reset the main moca box connected to the router. Once I had the PC moca box running, I turned it A test of the speed was performed. The maximum speed I am usually able to achieve is 880/880. Okay, things are back to normal now. NOT AT ALL. Next, I hooked up the set-top box, and then 150/150 started flowing. Motorola, after hearing about this, says, "The reason the speed decreases is due to a faulty router. " A speed difference with the Motorola box is that when the set top box goes to communicate, it makes the box go to those slower speeds. OK, first of all, that is not how the MOCA ALLIANCE STANDARD works. Moca as a method of communication as such is backwards compatible with older devices, and you will have the speed you need to connect to the device. In other words, if I had a Moca 2, I could do this. The other moca 2 injects the network from the 0 bonded box. As the set top box will be 1 in a 0 bonded box, that means the 0 bonded box will run 0. While my MOC2 is limited to 1 speed (about 170/170 max), my 1 speed moca has 2 speeds. This version of MoCA 2 will run at a DIFFERENT FREQUENCY than version 0 of Moca. The bond speed is 1000/1000 (zero speed). The Motorola boxes seem not to be following the proper specs for the MOCA alliance (and they really should be! ). The item was removed from the So basically, as long as there is a set top box next to me, my broadband speed will remain reduced and I will not know why. In any case, I did get a short-term fix for the time being. I no longer have to get my coax from the wall to the IN port of my two-way splitter, and then connect one of those ports to my set-top box and the other to my MOC adapter. Instead, I now connect the IN port straight to my Motorola My set-top box and bonded moca box are at the same time attached first to the wall and then to my set-top It allowed me to get between 500 and 1000 There is 600-600 up/down but extremely erratic. On top of that, the TV has a TV guide and on demand. I might be able to get rid of ALL OF THIS if I switch to actiontec. Their channels are The Moca 2 gave me this information for sure, because I had it. Box 0 of actiontec is NOT bonded. Moca 2 had to be broadcast on channel 1500mhz for me to get it. As for my set top box, it ran at 0 speeds and my set top box ran on 1150 (stock frequency for MOCAC) There is only one speed. As a result, both the set top box and my actiontec could communicate at once. Now I know for sure that the motorola box upstairs is able to receive more than one signal at once because at the moment I am getting ABOUT 500-600 requests per minute. As long as the set top box is still connected, the set top box will receive 600, essentially a slow bonding speed. In this way, it is able to sense two things simultaneously. It won't let me choose the frequency and SAVE to it on my own, and I don't know why. It should not be a problem to run 1500 MHz by bonded channel while the 1150 runs at As per the MOCA standard, the maximum is 1. I am left with no choice but to believe Motorola products are garbage. I thought I fried that Motorola box, turns out they don't even know what their own is! This product is slow and annoying, it takes 10 minutes to load. It is literally one Mississippi with plenty of space between each of the figures to ten. This is followed by a reset. As a result of this, I have 3 moca boxes that technically work, but do not conform to the full MOCA Alliance specifications. When you are trying to cut costs, DON'T buy the actiontec unit, rather buy the regular one. It's better to not do it than to regret it. If you have an internet connection of 150/150, it shouldn't be an issue if you have the internet up to 150/150. Speeds for one are up to 170/170 in any case. Please do not waste your time as I did by searching for a faster way. Definitely I would purchase the moca 2 from actiontec if I could afford it. There are five adapters, but they are currently marked "for service providers only," which is just b/s in my mind. When they come out, I will be tossing these Motorola brand phones in the garbage, not even worth giving away if they do not work properly within the MOCA Alliance standard. There are a lot of boxes on the market that can only run one frequency at a time, so if the box injecting into the network can only run one mhz instead of a range to accept more than one signal, there is no reason It follows, then, that the Moca box should be able to handle the full moca range with multiple frequencies at the same time, if the router is able to handle the full range. Others might respond with a response such as, "Well, Actiontec is claiming Bond 2 as well. " I already have my adapters setup "jury-a. dll" yes, but if I already have my setup "jury-b. dll" If I must wait until Moca 2 to get 600/600, I should just make do with just 600/600. It is expected that the iPhone 5 will be the most affordable to normal consumers, who will then purchase that.
and here's how I did it
. 1*
Support your state/province. Your router can be any model you wish. My personal computing device is the ASUS AC-100 In order to take full advantage of your Gigabit connection, you need a high-performance router. The Motorola MOCA Adapter Model MM1000
3 is an easy-to-use and inexpensive device. You will need to plug the Ethernet cable from your FiOS ONT into the WAN port of your A LAN cable can be plugged into any LAN port of the router, and then into the LAN port on the Motorola MOCA adapter*5. You will need to connect the cable coming from the Verizon ONT into the NETWORK adapter on the back of the Motorola MOCA. This is 5. On the back of the Motorola MOCA adapter, you will find a cable connector marked DEVICE where you will plug the coaxial cable from your set top box. The seventh point. You need to turn everything on. This is 8. Ideally, you should replace your old Verizon FiOS router with a newer, more capable model. You don't need it any longer. There you go. Using your MOCA adapter will convert your ethernet signal to MOCA and connect your set top box to the network, and then your router will automatically assign your set top box an IP address. We are not using any complicated bridge mode, nor are we using any cheap Verizon router in the mix. This setup works flawlessly for me right now, and I'm using it myself right now.
In order to provide my home network with a faster backbone than what I currently have, I bought three of these. Most people who would purchase these are just like myself and do not have ethernet wiring in their homes. I wanted a cheaper alternative to having it My current Internet service is Verizon Fios (75/75) and I have been using MoCA with the Actiontec router that comes with it. I'll tell you later why we recently cut the cord, but I've noticed that the speed of the network has slowed down with several Google homes and other devices. In my case, my router leases addresses to 35 different devices at the same time, so I decided it was time to reconsider my network As far as I was concerned, the Actiontec solution was much more expensive than Motorola's, so I chose to go with the Motorola's solution. I was very happy with the adapters for MoCA! It is easy to set up, with a constant, stable internet connection thus On top of all the wireless devices from our company, we also use an HD Homerun Prime and our basic TV package from Verizon (only $10 extra a month with more channels than just local). As all three tuners were in use at the same time, the network lacked speed. After putting the MM1000 in place, I have been able to stream all three tuners without impacting any I love it! A bonus of this is that now I can utilize the Verizon network bandwidth from any device in my home. *When I had Verizon upgrade the network, we also arranged for the ONT ethernet port to be installed. It will be Gig into the MM1000 from the ONT rather than using a Coax (MoCA) connection Pictures show the installation, network, and results better than I can express in words. Here are some pictures that illustrate the installation, network, Up to date We're almost at a year of use, no problems. All three units have worked without issue. During that time, I have not had to reboot any of the units, though they have been forced to reboot inadvertently As far as I know, all three units have recovered without any issues. I did upgrade all of their firmware for added security, but that was just for precautionary purposes. The last time I upgraded my wireless router, I went from just one unit on the 2nd floor to two units on the 3rd floor. The first floor is home to one unit and the second floor to another. The two different access points were plugged directly into the MoCA adapters on each floor, and not one of the mesh solutions. I did update my network diagram to reflect this change and to show that the MoCA adapters were each connected via one coax cable. For those who do not have wired ethernet in their homes but wish to have comparable speeds, I still highly recommend this product.
Related Products For Motorola MoCA Adapter for Ethernet Over Coax, Plug and Play, Ultra Fast Speeds, Boost Home Network for Better Streaming and Gaming (1 Gbps (2 Pack))
