Thermaltake Core V1 SPCC Mini ITX Cube Gaming Computer Case Chassis, Interchangeable Side Panels, Black Edition, CA-1B8-00S1WN-00
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It effectively rips a hole in the space-time continuum, through which all of your vacuumed stuff vanishes. It's one rube at a time that's saving the world!
Yes, there is a length restriction of around 200 mm on the psu, but since the vast majority of them are in the 140 to 180 mm range, this shouldn't be an issue. The vast majority of psus will fit.
The motherboard tray has risers built in. They're both punched out of the same sheet of metal. They aren't as easily removable as they are in some higher-priced models. cases at the end
Yes, it will happen. This case can accommodate a radiator of up to 140mm in diameter. It can be mounted behind a 200mm fan. If you want to use both H80i fans, you'll need to swap out the 200mm front fan for one of them. Because there isn't a lot of room in this case, I recommend using a modular power supply to reduce clutter and make room for your radiator.
Selected User Reviews For Thermaltake Core V1 SPCC Mini ITX Cube Gaming Computer Case Chassis, Interchangeable Side Panels, Black Edition, CA-1B8-00S1WN-00
This is a case that I really like. To begin with, it is appropriate for my requirements. I wanted something that could be stored in an Ikea "box of open cubes" shelf unit. Each cube's opening measures 13" x 13" (H x W). The Core V1 is a sub-tenth of a percent of the total. 9" x 10. 2" H x W. It's a perfect fit, with plenty of room for ventilation. Everything is kept at a pleasant 25 degrees inside the cube. At idle, the temperature is 27 degrees Celsius. The quality is excellent. br>br> The metal is lightweight but strong enough to be placed on a shelf. All of the components are in good working order. The connectors and switches on the front panel all worked as they should. It has a nice fit and finish and is a nice looking case. br>br>Thumb screws are used to remove the top, bottom, and both sides. The top, sides, and bottom can all be switched out. The windowed panel can be placed on top or on either side of the case. (Thermaltake sells replacement window panels for this case. ) It would be great if they sold replacement vented panels. I'm not going to use the window. )br>br>Assembly was a breeze due to the convenient location. There's enough room inside for my 160mm non-reflective lens. The modular power supply performed admirably. The excess cables were neatly tucked on the PSU's side, and I was able to route and tie the cables together to allow for good airflow through the case. br>br>To improve airflow, I installed the windowed panel on one side and the two ventilated panels on the top and other side, pushing the windowed side of the case against the cubby hole wall to encourage airflow out the ventilated top and side. br>br>I did not install the optional (not included) 2 x 80 mm fans in the case's back. Between the included 200 mm front fan, the fact that my older model PSU draws air through the case, and the natural ventilation built into the case itself, there's plenty of ventilation. It is not a dead silent case when using the stock 200mm fan, the stock CPU fan, and my older PSU with 2 x 80 mm fans. br>br>I have no heat issues. It continues to sound like a computer is in use.
1) Perfectly sized cube chassis with thumb screws on the sides and bottom for easy access. Very similar to the Thermaltake Suppressor F1 cube case, but with a full front ventilation grill and a lower price. br>2) The CPU cooler height has a maximum clearance of 6 inches. Noctua NH- is the brand I'm working with. Cooler in the D9L, but NH-free in the NH-free. C14S can also be used with a bottom-mounted fan. br>3) I'm running an ASUS GeForce GTX 1060 6GB Dual-Channel graphics card. The fan OC Edition is a perfect fit for the case. br>4) I made a miniature version of myself. M2 on an ITX MB Although there are two slots for 3. 0 SSD/i7 7700, there are only two slots for 3. 0 SSD/i7 7700. 5 HDD/2. SSDs with a 5 inch form factor for expansion. br>5) This case has a separate compartment for any full-size PSU, as well as a removable fan filter in the bottom panel. 6) The front of the case has a large, powerful fan that draws a lot of air in. Because the front fan only has a three-pin cable to connect to the motherboard, it runs at full speed and makes a lot of noise if you sit close to the computer. br>7) There is a minor issue with the power button being on the left side, near the USB3 ports. br>8) In the end, this would be the tiniest mini-game possible. ITX gaming case for smaller video cards that can also accommodate most Noctua CPU air coolers without sacrificing performance when compared to water coolers, which are prone to failure. You will not be disappointed if you get one. br>br>.
5" hard drive that hasn't been tampered with. For me, this case was the best option. I'm not a gamer, but I do a lot of video editing, so I need the speed of a gaming computer without the size; this case is small enough to fit in my office, and I need a lot of storage space (hdd). Although I understand that SSDs are the way to go, they are still prohibitively expensive. br>br>At first, I assumed I'd have to set up the case with two threes. There are two 2-inch drives and five 5-inch drives. Because everything I read online said the hdd bracket could only be configured in this way, I decided to go with 5" drives. Surprisingly, I quickly discovered that the bracket is also designed to fit two 2. Each bracket has a 5" drive (as shown in the pictures). The first hdd is connected to the drives using the four screw holds on the back, while the second is connected using the special 2. The bracket has a 5" modification built in. Because the case can hold two brackets and each bracket can hold two, the total number of brackets in the case is two. There are four 2. 5" HDDs in total. 5" drives are available. Because I have four 4 TB hard drives, I can store a total of 16 TB in one small case. br>br>What you read in the questions and answers section is not true. If your motherboard has four SATA ports, you can use up to four hard drives in this case. If your motherboard is equipped with an m. You can use the extra storage space in the second slot as well. br>br>I've got four 2's set up on my computer. 4 TB HDDs in a 5" form factor and a 2TB m. In one computer, there are two cards with a total capacity of 18 TB.
Related Products For Thermaltake Core V1 SPCC Mini ITX Cube Gaming Computer Case Chassis, Interchangeable Side Panels, Black Edition, CA-1B8-00S1WN-00
