FT 5-Ton Power Puller - Dual Gear Lightweight and Portable Pulling Cable Rope Puller | Come Along | Ratchet Winch Puller System | Automotive Hoist Pulling Kit

In my case, the same problem occurred as reported by BH. It does not engage when the cable is loaded and the ratchet is bound. When I first used the ratchet, I had to manually push it into the teeth with my finger each time I pulled once the teeth became A very dangerous situation. I will lubricate it and see if that fixes it, otherwise it heads back to the shop. Greasing the machine at the factory was a good idea.

Zyair FIELD

| Apr 29, 2021

With a lot of tension on it that becomes a big pain and even a little dangerous.

Ali Morse

| Jan 18, 2021

It has really hard edges and is very heavy. The catches on the spool must be disengaged with two hands in order to release the it was set up, I used it to pull a 12" pine stump out of the ground. I'm good to go.

Alonzo Dunn

| Feb 02, 2021

I live on a ranch in a rural area where our barbed wire fence is almost at the edge of the forest. Recent trespassers cutting wire fences on our property with ATVs drove through a dry wash on our property and cut the wires. This was the come-back we used Specifically, we used a long (puller) to tighten the barbed wire as it was hanging. I was very pleased with the results! While this was much more powerful than we needed, it certainly made our work a lot easier. The construction is well made and of high quality. In reality, we purchased it to keep in our truck camper, since we do a lot of off-road (distributed) camping and need to have something in case we get into any type of difficulty. This test run was a good thing for us since I doubt we will need to use it that often, but when we do, I'm sure we will have no problems with it.

Belen Baldwin

| Dec 20, 2020

It has a strong cable, good pulleys, and good hooks. A fast and easy way to pull cable. As of now, the only issue I have had is with the rachet This raket was functioning, but it needed oiling since the teeth of the rachet did not mesh with the teeth of the cog, causing it to I immediately sprayed some silicone on to fix that issue, but to be honest, the first time it popped loose under load I was in a complete panic. Could have just been a random QC issue, but it was supposed to be tested before shipping.

Emiliano Costa

| Apr 28, 2021

As such, this item will be found in my truck's emergency kit. A come along is among the most valuable tools you'll find when you get stuck in the snow or mud. The tool has a pull capacity of up to 10,000 pounds, so it will get you out of whatever sticky situation you may For anyone living in a remote area, it is extremely important to have this kind of tool available at all times. It is also a good idea to keep This is an excellent book!.

Kade Young

| Dec 30, 2020

I think that this is a much better come along than my last one A) All parts are heavy duty (no flimsy rivets or light An end with a swaged loop and a properly crimped base is used as the load hook end. The anchor and load hooks are both 5/16" hooks of good quality. Each of the two pawls (drive and stop pawls) consistently locks into the main ratchetable drive when in use. laminated steel used in the pawls and ratchet drive makes it extremely strong. When pulling the winch on bigger pulls, I don't feel like it is overstrained and I don't have to exert much effort on its operation.

Amber Duncan

| May 04, 2021

You can count on us! I find this puller to be of good quality and it definitely does what it promises. Our house is located in a rural area and we got this after a harsh Texas winter storm to help pull some of the partially fallen trees that have fallen Our lives were made easier thanks to the product! It was easy to use and made life a lot easier. It is possible to find a puller with a slightly cheaper 5 ton capacity near a store. Therefore, he only gave it 4 stars. As a whole, you should keep this around for a long time.

Xavier Curtis

| Jul 04, 2020