Dorman 800-206 10mm High Compression Union
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Designed to fit steel tubes with outside diameters of 10mm, the union securely fastens the tubes together. It measures approximately 600 feet from top to bottom. A quarter of an inch. Despite the fact that it is not specified that brass tubes will work with it, I believe it will still fit. This is an extremely well-made item. I hope this is helpful
There is one box per person
There are unscrewable parts. An optional compression ring can also be removed from each side.
It is good for firing resistance. The delivery was fast as well.
Selected User Reviews For Dorman 800-206 10mm High Compression Union
Two of these parts were purchased so that I could repair a power steering hard line on my Volvo V70 2004. The bad section of line was removed, a new length of line was obtained, and these couplings were used to install the new line. My goal was to make sure there would be no leakage, so I tightened the fittings pretty tightly. It has been about 5 months since I made this repair, and there has been no leakage. My fittings are just beginning to rust very slightly, so I coated them with some used motor oil when I changed my oil. There aren't any extra ferrules in this kit, which is disappointing to me. Should I have botched the repair, I would have needed to purchase separate ferrules and likely waited a few more days for the repair to be done. It was a very good buy for the price. In the event that I had to repair the damage again, I would probably choose corrosion-resistant materials Stainless steel or brass versions of this 10mm fitting are resistant to corrosion. In some applications, low-power devices can be used These are perfectly satisfactory as long as there is no rust risk.
Two extras were bought purely for the sake of having them.
This compression union was installed and I was able to seal up the leak at the leaky tube, and the tractor is running like new again.
Thank you very much. Let's get started You're all set! The purpose of this is just that. The ends of two 10mm lines are joined very securely.
Was very good at her job.
It is fitted with compression.
The high-pressure side of my power steering system worked fine with this tool. I agree that this is an excellent piece.
It is hard to find a compression union with a diameter of 10mm. The fact that they had it is good. The repair of a fuel line was a perfect fit for my application.