Coupler Replacement Latch - Coupler Repair Kit (2",3500LBS)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
I agree, but it is just a matter of tightening a
There is enough room in the hole to accommodate a standard padlock. The situation should not be an issue
That's not the case, at least not in my opinion. One of the things I did with it was write a story There are seven eighths inch hitches and that is what is described. It's likely that a ball with a 2" diameter would require a larger
Selected User Reviews For Coupler Replacement Latch - Coupler Repair Kit (2",3500LBS)
In the end, I compressed the spring with pliers and temporarily secured it with plastic ties after failing to do so several times previously. Once I had the nut started, I simply cut the zip ties with my pocket knife, then tightened the nut on the ball hitch to my liking.
My log splitter hitch assembly broke, so instead of just replacing the entire unit I ordered just this part (which I paid $50 for). Although it was fairly easy to replace, it was a little difficult to figure out where the springs should go. It took me a while to figure it out, so I then checked the ball's tightness. If the nut is tightened or loosened, there will be an adjustment in how tight the ball is held. The replacement part is fairly decent for this type of application. The material is light and it's not American-made, but it works well enough for moving a log splitter. The trailer does not look like one to drive on a.
The pieces need to be assembled in the order they were originally A defective latch on my hitch ball prevented it from being tightened completely. In order to ensure my trailer was securely tacked to the hitch ball, I needed a new coupler latch.
When I used this, I had a very small trailer and loads that were typically less than Around 200 miles into the trip, the coupler, which held the trailer to the car, broke away. It has been a very scary experience. A few times it was used after it had been installed properly.
Using an old locking piece was necessary because the hinge pin was larger than the opening for the locking In other words, it worked well and now it works on my ball hitch too.
As you can see, my old coupler latch was pretty rusted and I needed to replace it. I was impressed by how easy it was to install and how perfectly it fit. Fortunately, my coupler looks as good as new and works as smoothly as before. This is definitely a good book to recommend.
It works great and was.
The price was reasonable and the delivery was on time. I would recommend the service.