HURI 2set Brake Master Cylinder Sight Glass with O Ring for 50cc 125cc 150cc 250cc Scooter Dirt Bike ATV
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
No, but the old one must be removed, as well as the old o- clean up the opening and put in a new o- Replace the sight glass by ringing it and pressing it into place.
The 18 mm sight glass is used on the majority of bikes.
Take a measurement of the hole where the sight glass will be mounted. I believe the size is 20 mm, and if that is the case, they should work. The majority of scooters and motorcycles have a 20 mm sight glass.
It should work if your sightglasses are of the same size.
Selected User Reviews For HURI 2set Brake Master Cylinder Sight Glass with O Ring for 50cc 125cc 150cc 250cc Scooter Dirt Bike ATV
I had to do some additional cleanup because seeping brake fluid had lifted the plating around the sight glass on the chromed master cylinder. Because I hadn't completely cleaned the burrs off the master cylinder on the first attempt, I destroyed one new sight glass. The second attempt, on the other hand, went off without a hitch. You must ensure that the new sight glass is inserted into the hold at an exact angle. To get it started, I used a hammer on a block of wood against the glass and then used a same-size hammer on the same-sized hammer on the same-sized hammer on the same-sized hammer on the same-sized hammer on the same-sized ham To tap it the rest of the way, you'll need a large enough socket.
To get this in, I used a regular hammer and a towel for padding. Then I added two layers of cardboard to give it some more cushioning. Fits the rps hawk 250 Chinese dual sport; I'm not sure if they're glass or plastic, but for the price of two, I'll take it. My previous display was made of cheap plastic that had yellowed and cracked.
This worked perfectly in the master cylinder, and the shop demanded $239 for it. 00 for a new one, despite the fact that it was not repairable.
On my 2006 Yamaha clone dirt/street bike, I rebuilt the front master cylinder. It was a simple process. I used my drill press to even out the pressure.
It's a great way to avoid buying the wrong master cylinder multiple times. Additionally, it is less expensive. There were no leaks and the fit was perfect. It is simple to put together.
Two master cylinders on a hyosung ms 250 scooter were repaired and were in perfect working order.
My Polaris Outlaw 525 S 2008 is compatible with this part. and putting in the effort to complete the task. Thank you very much. br>.
It's a good thing they sent you two because the first one will almost certainly fail to install. It did, however, work. I've resumed my travels.