AutoLoc Power Accessories 9848 2 Door Flat Power Window Kit U-Wire Driver or Passenger
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It draws approximately 10 amps when it is dead. The device operates at 3 amps on average.
Usually, the upper portion of the glass needs to move up and down 14 inches for it to miss the lower portion of the doorframe. The regular channel had to be removed along with the motor and about 3 inches of the regular channel was also moved. To line up the channel with the window travel line up the channel with the window travel because the channel is not made to bolt to the window channel. You can call me at 901-871-7100 The two 29- You can contact me at 912-266-4539 for any other questions you may
Short doors can be fitted with the upright power rack, which can be cut short by 24 inches. I believe the cross window lift is between 8 and 10 inches long It is 9". I spent five hours fitting the door by trial and error.
The hole cannot be drilled out and re-installed. A little fabrication will be needed to make this work.
Selected User Reviews For AutoLoc Power Accessories 9848 2 Door Flat Power Window Kit U-Wire Driver or Passenger
A computer printed packing list was the only item included in the box. There is a "Made in China" tag on the outside of the box. There is NO paper or installation instructions inside. According to my understanding, Bosch motors have to be stamped with their identification number. None of the parts have any indicator of who manufactured them or any part number of any kind, even an Autoloc number. It was very poorly packaged in that there was nothing included to keep the pieces from smashing into each other inside. It was evident that one of the rails poked out of one end of the box. We will have to wait and see if these perform as advertised. There is a possibility that I will return.
It is necessary to have some fabrication skills in order to mount them properly, since these are universal. I was able to retrofit them to my 1993 Freightliner FL70 with a little bit of work. Due to the thin door frames on the freightliner, the units have a very low profile and are very thin. It was a great experience and I will use this service for future projects. Thank you so much.
removed the plastic every time I turned the winding mechanism and this kit has the original one. Kit uses an adapter to fit the window bottom channel (or window bottom channel) and does not need plastic parts or springs. It's easy to set up and seems pretty beefy in its design.
With AutoLoc Power Window 9848, I replaced an old power window unit that was similar. Since it was a replacement, the installation was pretty easy since it was typical for a hot rod. It worked fine for 2 months and now the motor no longer works. My first step was to directly power the motor to isolate the issue. Powering the motor in the up and down positions just results in a clicking sound.
The description does not include the switches, mountings, and wiring as shown on the picture that appears upon clicking the product. The AutoLoc window lift does work in a 8 volt system, and I have it During the process of lowering the window, the glass itself comes down quickly, but going up from a 12 volt system, which this lift was made for, would probably be faster.
A pretty weak and slow creature. Simple enough to install and wire, but just wimpy in terms of performance.
We found it helpful in what we needed.
The installation process is simple.