BlackPath - For Dodge Durango + Dakota + Ram Throttle Body Spacer Kit 3.9L + 5.2L + 5.9L Engines (Black) T6 Billet

Buying this hoping I could improve the gas mileage of my Gen 2 Ram 1500 that is notoriously bad was a wise decision. It was easy to install, likely to increase gas mileage, and significantly improved response times. There isn't much to it - installation is straightforward This product includes one page of instructions in the form of a picture. Having both of these tools, along with a YouTube video describing your vehicle, is all you need to succeed. There are places where the throttle box does not fit normally, which causes the air filter box to set higher than normal. You will need to adjust the engine wiring harness slightly yet again where it runs under the cowl near the firewall inside the engine compartment. There are two gaskets attached to the product. When you install the gaskets, make sure they are not askew before tightening everything down. Be careful not to tear them while doing so. Despite this being a "no duh" comment for gearheads, this can make for a great introduction to engines for those with limited mechanical ability. Having run two tanks with these spacers so far, this spacer performs well. I gained some mileage on the highway, with MPG increasing from high 14s to high 16s. When driving my commute, I'm getting about 13 MPG instead of the 11/12 that I used to receive. So far, the fuel economy improvement is looking good. However, we need to collect more data to fully confirm.

I have been absolutely amazed at the level of responsiveness. As soon as I give it gas at the stoplight or drop out of O/D, it accelerates just as good, if not better, than it has ever done. Additionally, I think that I fixed a vacuum leak in the course of installing the system My car now runs smoothly with no hissing noise when I press the gas pedal. In my attempt to remove the throttle body, I did not see any gasket between the air plenum and the throttle body. In general, I'm satisfied with what I've done. Our next step will be to see if it works.

Shepard Charles

| Feb 18, 2021

Since the intake system is designed to operate from kegs, I could not have expected much. In the 2000, there isn't a center divider, so you can't divide your screen into two parts. But I was very satisfied with the way it worked. Having nothing to do is so much more enjoyable. It is quite swift to respond to a throtle. While I live on a somewhat steep hill, she is able to pull it a bit more easily. There is no guarantee that this product will turn your truck into a pro puller, but it is definitely noticeable when she runs. we will see how it affects her driving efficiency, but should be enhanced. 91-series won't work as well as they do on the 93-series We needed it for 97 mag's as well, because the early keg intakes featured the divider. If you are using an aftermarket dual plane intake then it would be best to use this spacer. If you are using a stock titanium TB then a stock air cleaner will work but it will be more difficult to install. There was nothing wrong with it I'll update it after several tanks of fuel have been used. This is all I have to say.

Freya Mathews

| Jul 18, 2021

However, it did not conform to what I expected. Keychain bottle opener and stickers are included in it! I love the look and how quickly it installed. I spent about 15 minutes on this. There was a 2004 Dodge RAM 1500 4X4 with a 5 cylinder engine which was mounted with this. Installed a catalytic converter and upgraded to a 9L engine after experiencing a better throttle response A duel exhaust system for the back and a cold air intake system for the front.

Presley Burton

| Apr 24, 2021

A 3 is what I have. Powered by a 9. 4 liter V6 and paired with a 4 speed auto and a )It is rather sluggish with the gear ratio, but this helps it get up to speed a bit more quickly. Although this does not add 25 horsepower to the engine, it does reduce the effort required to run the engine.

Amari Coffey

| Oct 28, 2020

My first point is that I do not have any problems with the product quality. A throttle body spacer previously made by this company worked well for me and was made to fit correctly. I had been quite satisfied with my previous purchases. This is therefore what I installed The second line). Despite its poor performance, the system remained online. During the loss of power, I also lost I choked the truck so badly that I felt like I had choked it to death. The installation of this device on a factory keg intake does not appear to be beneficial. In addition to the cold air intake, I have a complete Accel electronic ignition set up that has proven to be reliable. On the other hand, if you run a factory intake, I would say no.

Kamdyn Deleon

| Apr 13, 2021

On my 2001 Ram 1500 with the 5 cylinder engine, it has been installed. All the necessary parts were included, so it was extremely easy to install. Performance over the low- and midranges has been remarkably improved. I really appreciate the time and effort put into this. I was able to get it installed.

Addilyn Dodson

| Jan 17, 2021

Only a small amount of trimming of plastic was needed on the cruise control for installation. This is a new experiment that I will watch with interest to see if it increases my mileage. The engine has a 9 litre capacity. Hope you get some more power as well. I received my delivery very quickly and it was packaged very securely for safe delivery.

Royal Ballard

| Dec 24, 2020

It would be nice to be able to promote this product and brand. I only complaint is that the stickers I received were messed up. Please send me some stickers. Thank you so much for all you do!.

Kasen Vargas

| Aug 02, 2021