WIX Filters - 33002 Fuel (Complete In-Line) Filter, Pack of 1
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A 5/16" hose is needed for this
The vehicle must be operated on gasoline (not diesel) You should use 33972 when it comes to diesel fuel
There is no check valve on this.
If you place the plastic bowl on any side, it will typically fill about halfway. Whenever I experience it, I always find that the upper half has a lot of air in it.
Selected User Reviews For WIX Filters - 33002 Fuel (Complete In-Line) Filter, Pack of 1
The dimension of 33001 is 1/4" x 1/4" An example is the 33002, which is 5/16" x 1/8". In addition to 33003 it is also available in It would be helpful if the size of the filter were clearly outlined. The size of the filters was not clear, which led me to purchase two different filters I did not need.
All of my outboard boat motors (5, 35, and 70hp I install the filter right near the fuel tank before the primer bulb and bypass the little factory filters in the motors), and my riding lawn mower with a Briggs 25hp use this filter as well. The clips and zipties I use have never given me any problems. I never have a leak of any sort and have never used zipties. If you use your filter for a long time, it just depends on how much gas passes Since the rubber fuel lines on the above mentioned engines require ETHANOL FREE gas, I only use it. your fuel line is rubber, cut it somewhere before the fuel pump (or carbifuge if your fuel line is not rubber). A filter such as this will extend the life of your pump and prevent you from having to rebuild your carburetors.
In my car, I had a Wix 33002 (before the fuel pump) and an unbranded, look-alike filter (before the carburetors), both of which had been in use site looked perfect, but the unbranded one left much to be desired. It is likely that the glue securing the paper filter to the plastic housing was disintegrating and sending fragments into the carbs. This prevented the float valve from closing and causing the overflow to spray gas. Wix replacement sealed the deal for me never again will I buy a bargain filter.
High heat conditions can be dangerous when it comes to plastic. It is ideal to use this filter for determining fuel flow if it is necessary. On a 77 Chevy truck, I installed them between an auxiliary fuel tank and a new fuel selector valve switch. By clicking the switch to the position that activates the new selector switch, I could see the gas coming out of the tank and entering through the transparent plastic filter of the switch. Other than that, there would have been a need to perform some other more complex and messy type of testing in order to assess whether the auxiliary tank was properly connected and if It is only my concern whether the plastic will last for a long time due to exposure to the.
With this, I was able to deliver fuel to my 5-hp generator by gravity. I apologize for my error. Pumped fuel delivery is what this is for. Despite being a good filter, gravity feed was impossible because the filter's resistance to flow was too high. The generator would starve for fuel and die. I am dying. In terms of gravity fed fuel delivery, I purchased the type that resembles a disk with a fine mesh screen within. There are many kinds of filters available from Wix, and I use various types. My mistake was that I chose the wrong one.
The reviewer(s) who received a smaller diameter filter must have received the wrong part.
The service I needed was provided. It is time to put a truck back on the road after 4 years of sitting. It was necessary to add additional filtration at an affordable price.
Compared to the same priced AutoZone filter for $6, this filter is significantly nicer. There is more surface area of the actual filter and it feels solid.