Nilight ZH303 2PCS 6.5 Inch 120W Spot & Flood Combo Driving 16AWG Wiring Harness for Led Work Light Triple Rows Off-Road Truck Car ATV SUV, 2 Years Warranty , White

Either there was a direct ground inside the supplied wiring, or the wires were about a fifth the size they should be. Because the wires became so hot, I had to replace all of the looms and re-run the wires due to the product's damage. You can save a little and pay a lot by saving a little and paying a lot. The total bill will be around $1000 to cover all of the wiring that this thing melted due to contact; additionally, I am a technician with over 30 years of experience, and I am using a standard 12v ATV battery.

Alijah Henderson

| Jul 13, 2021

Four screw heads were loose and one was cross threaded, according to a close examination. br>br>Light 2 - Light 2 - Light 2 - Light 2 - Light 2 - Light 2 - Light 2 Everything went smoothly. The colors are extremely vivid. However, when I went to take the lights down the next day, there was fogging and condensation under the lens! VERY POOR ASSEMBLY? br>br>WHERE DO WE GO FROM HERE? OR WAS IT JUST A RETURNED ITEM THAT I RECEIVED? br>br>Please address this matter, as I am a Retiree on a limited budget who simply wants a high-quality light to assist me in driving at night. Mr Vernon, thank you for your assistance.

Adriana Cowan

| May 05, 2021

Indeed, these are the lights to buy if you want to be seen driving around the world from the International Space Station. The customer service, however, is even better than the lights. I contacted NiLight because I was having trouble with the brackets. Lucy was absolutely fantastic. NiLight never argued with me about my problem; she simply took care of me, which was all that mattered to me! Every company can have a product that has a flaw, and NiLight quickly resolved my issue. That (in my opinion) is extremely important, and they managed to accomplish it. I am completely satisfied! Yay! I have a number of NiLight lights for my vehicles and plan to keep buying them. The first set I bought a year ago is still on my jeep, enduring a lot of jarring and bumps and still working perfectly!.

Clarissa Melendez

| Jan 27, 2021

This was used to make an ice fishing sled, and it was extremely bright. After purchasing, I discovered that the battery in these bad boys only lasted about 5 minutes. I purchased a lawn and garden 32RC (25 amp load for 32 minutes) 23(Ah) amp hour battery with 330cca (cold crank amps). For your information, this means it can handle 23 amps for an hour and lasts 32 minutes at 25 amps until 11v, I believe. With 25 amps and 32 minutes in mind, I calculated my calculations. One light bar (120 watts) generates 10 amps, while two light bars (240 watts) generate 20 amps. Light bar amps = watts 12v (your current) I did 25 amps (my battery power load) amps (10-minute run time) to get enough run time. Lights (20 amp) = 2. After that, I multiplied it by 25 amps of run time. 5 or 1. 40 x 25 (minutes) = 25 x 32 (minutes) ***Hopefully, I'm correct***, the film will be 80 minutes long. So, with this system, a $35 battery will last 40 minutes, or 80 minutes if the power is reduced by half. I hope I'm correct, and I hope that laying this out will help others who find themselves in a similar situation to mine, where they need a lot of power but don't have access to an alternator or a vehicle.

Antonio Wang

| Apr 23, 2021

On the grasshopper mower, these lights will be installed. I really like how the wiring harness comes with terminal ends already attached. The lights themselves must be terminated, and the kit includes the necessary terminations. Three fuses (15, 15, and 10) are included as well. There are also mounting brackets. All that is required is crimping the terminals to the lights, slapping in a fuse, and connecting the pos and neg to the battery. They're very bright, as I discovered when I tested them. Everything appears to be of exceptional quality. I also like how the mount is screwed into a trapped nut on the back of the light. The nut slides freely across the width of the light (until the mount is attached and tightened, of course), giving you a lot of adjustability.

Haylee Evans

| Aug 04, 2021

I wasn't expecting these to be as bright as they are. The color temperature is a very cool white, and the floodiness is extremely high. It's pointless to try and aim these - They shine a light on everything. When we go camping, these will come in handy. On the ZJ, I mounted the fog lights so that they hang from the top of the bumper holes, using the stock fog light wiring. Because the mounting hardware is limited, you may need to be creative in your placement. We'll see how long they last, and I'm thinking about using silicon to fill in some of the gaps to improve water resistance.

Rayna Avila

| Jan 18, 2021

I bought six. Spot/flood lights that are 5 inches in diameter and a wiring harness. The lights were delivered and installed the same day. They have a lot of brightness. The lighting on the food is spectacular. The light spread is extremely broad, and the spot lighting is excellent. Although not outstanding, it is acceptable. In the comparison photos, the nilights and headlights are both turned on, followed by just the headlights of a Polaris ranger. The structure appears to be sturdy. I went for a ride tonight before dark on some fairly rocky trails, and the mounting hardware appears to be in good working order. It was simple to install and wire, and I'm happy with it so far. Excellent value for money. I'm hoping they stick around.

Sage Wolfe

| Oct 31, 2021

So far, they've been a good pair of running lights. Two things that are difficult to come by are extremely valuable to me. First, they're a flood spot combo, and second, they have a gimbal-style mount that allows you to tilt and slide them sideways to fit just about anything. I noticed a lot of inquiries about the light's wattage. If you read all of the information, each light fixture has 40 3 Watt LEDs, for a total of 120 watts, or 240 watts for the pair at 12 Volts, or 20 Amps. A 16 gauge wire with a maximum power rating of 180 watts is included, as well as a 15 amp fuse. Even at the age of 13, she was already a natural leader Even at 2 volts, over 18 amps are still present. As a result, after installation, I measured the current to be 5. For a total of about 11 amps, each light fixture uses 8 amps. A total current draw of 6 amps is required. It was 12 degrees with the engine turned off. 8 volts equals 150 watts of actual power (rounded up to 2 watts for error) which is within the light kit's specifications. So, the wire and fuse sizes provide the engineers with the actual information they require, while the rest is marketing nonsense.

Joaquin Roberson

| Jun 19, 2021