Nilight 18022C-B 6.5Inch 2PCS 6.5 Inch 120W Spot & Flood Combo Bar Driving Waterproof Led Work Light Triple Rows Off-Road Truck Car ATV SUV Jeep Cabin Boat, 2 Years Warranty
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
120W seems to be a good match - Each unit produces the same amount of light as a standard 120W incandescent bulb. (or 2. Headlights with five high beams! )br>This does not imply that they use a lot of electricity. br>At the age of 12, Each unit draws 2 amps at 66V from the battery. 14 kilowatts (A) - 27W. br>Together, they add up to four. Power output is 54W at 28A. br>Because these are LED units, the power draw (Amps) will not vary significantly as the battery voltage changes. They don't operate in the same way that regular incandescent bulbs do. So, with the engine running at 14V, a lead acid battery will only take 2 amps. Both may be powered by a 5A fuse (= 28W of power), but a 10A fuse will last longer and be more reliable. The fuse is there to protect the WIRING, not the light, so keep that in mind.
5/16" = 0mm = 8mm = 0mm = 0mm = 0mm = 0mm = 0
The following is taken from the product description: (40 x 3 watts) = 120 watts Each light has two rows of ten highlight chips, for a total of twenty in each light. As a result, the 120W rating refers to both light sources, each of which consumes 60W. The light cables have a 22AWG wire gauge. Whether you're using a 12V or 24V power source, the amp draw will be low.
If brothers arrive in pairs, there will be two in the package.
Selected User Reviews For Nilight 18022C-B 6.5Inch 2PCS 6.5 Inch 120W Spot & Flood Combo Bar Driving Waterproof Led Work Light Triple Rows Off-Road Truck Car ATV SUV Jeep Cabin Boat, 2 Years Warranty
I'm going to offer you some advice. I noticed water seeping into one of the units and decided to disassemble it and replace the crappy rubber seal with a FAT bead of silicone that went all the way around each side and it hasn't leaked since. Also, IF YOU PURCHASE THESE, YOU MUST INSTALL A THERMAL PAD UNDER THE LED BOARD. The board is simply 'floating' against the heatsync with the tiniest dab of CHEAP AF thermal grease; this WILL NOT effectively cool the board and will result in premature failure over time. I added a cut-to-size thermal pad and applied the silicone as directed, and I've noticed that the outside of the LED housing is slightly hotter than before, indicating that it's now properly cooled!.
These units were just received and tested. Although all of the factory hardware needed to be tightened, the units worked fine. On the bench, they appear to be very bright, but I'll update this review once I've installed them on my truck's bullbar. I haven't had any issues with other units purchased from this seller. br>Specifications taken on the test bench with a Rigol DP1116A power supply and a Rigol DM3058E dmm; /- 4 amps @ 100 ma, 13. Each one has a voltage of two volts DC. Each unit has a power output of 58 watts. br>br>I have nothing but positive things to say about these units after using them for a few months. There is no noise on my radio, as others have reported, which is most likely due to poor grounding on their part; there are no problems with the mounting hardware, and there is no water intrusion. br>I would highly recommend these lights and have changed my rating to a five-star rating.
I had a few of these lights with me. And when they were first installed, I was blown away by how bright these jokers are. I had them installed on my big rig and only used them in bad weather to light up the road. I installed them in April of 2020, and one light is still working, while the other only has about four leds flickering. I have had a lot of rainy weather this year, and moisture has gotten inside and destroyed the circuit board, as one customer stated. We purchase these items so that we do not have to disassemble them and perform the maintenance that the manufacturer should have performed in the first place. So, if you only need a short service life, go ahead and get these; if you need a longer service life, look for a better built light and spend a few extra dollars.
Bright. Pattern is very good. It's quite good. The lighting is adequate. They don't blow me away, but they get the job done. I covered them in amber film and mounted them on my roof rack as perimeter lights facing down. br>At this low price, I am satisfied. I didn't realize they didn't come with any kind of wiring harness or connectors when I bought them, but I usually wire my lights myself for extra protection and waterproofing anyways. br>They APPEAR to be well sealed, but I went to great lengths to re-seal them because I'm mounting them inverted and sideways. I was the one who sealed them.
These lights are extremely bright, which is ideal for my needs. On my 1968 MF tractor, I installed them. The ones that came with the car weren't very bright. Don't let the low cost of these lights fool you. I'd compare these to the most expensive ones as being equally good, but better because of the price! Super simple to install when using the Nilight wiring harness kit (sold separately). br>br>I'm going to buy more of these for my ATVs and whatever else I can think of! Thank you very much! A+++.
I'm a repeat customer who appreciates a good deal on a bright light. However. Nilights are not true rated output Nilights are not true rated output Nilights are not true rated output Nilights are not true rated output Nilights are not true rated output Nilights are not true rated output Nilights are not They do, however, contain true rated LED lamps, which are underdriven for longer life, and they still produce a bright light, which I am satisfied with. br>br>Impervious to water - I doubt it; the units don't appear to be consistently assembled to where the seals are sandwiched in place, and most home installers can tighten them up to make them work fine. br>br>Installation hardware is missing on my most recent purchase (these); NiLight claims to be sending me the missing hardware and appears concerned that it is missing (the box had been torn and repaired with tape). I don't think it's their fault, but if I were them, I'd be concerned about Amazon's ability to keep their product in good condition from the factory to the consumer. No offense to Amazon, but we all make mistakes now and then. br>br>Would I buy NiLight again? You bet I would, as long as I like a good deal.
I really wanted to give it five stars, but the mounting hardware is a flaw. It appeared to be simple enough to install, but after doing so, I discovered there was no easy way to adjust the angle of the lights without first loosening everything and hoping you got it right before tightening screws. Also, if the light is poorly placed, use the Allen head screw to adjust the angle after installation. Aside from that, the lighting is incredible! They're insanely bright when we put them on our pontoon!.
I contacted Nilight and they promptly sent me a new hardware kit, which I installed on my truck and wired using a Nilight wiring kit that I purchased separately. As a member of the emergency services, I frequently require more light at night to see, and these lamps more than suffice. I've used a few other Nilight products before and have always had great results!.