550 Type III Paracord FID, Lacing, Stitching Needles by Jig Pro Shop (2 Pack 3 1/2" Stainless Steel)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You must first burn the cord's end, then insert it into the needle opening and twist it like a screwdriver before it cools. When it cools down, this will keep it in place. br>V. Unscrew the paracord when you're finished. Lauria
"Pointed" is a difficult term to define. They are excellent for paracord projects and come highly recommended. They allow me to weave some very tight weaves. They aren't the same as regular stitching needles.
Thank you for your question,br>br>Hello,br>br>Thank you for your question,br>br> Manny was a personal friend of ours, and he used our Type II needles in his technique. This needle is a Type III, so he won't be able to use his method on it. In our Amazon store and on our website, you can find Type II needles made of stainless steel or aluminum.br>br>Thank you again,br>Russellbr>Jig Pro Shop LLC
I'm not sure where they're made, but they're made of good quality material (stainless steel, I believe), and they won't bend, warp, or break unless you hit them with a big hammer. They're designed to do exactly what they're supposed to do, and they're built to do it very well.
Selected User Reviews For 550 Type III Paracord FID, Lacing, Stitching Needles by Jig Pro Shop (2 Pack 3 1/2" Stainless Steel)
Without these fids, I'm not sure how I would have completed my paracord bracelets. I had my doubts about the paracord's ability to "screw" into the back of the shirt. I was surprised at how well the fids kept the cord in place. I was able to squeeze through the tiniest of spaces in order to complete the bracelets the way I wanted. I tried a variety of methods to join cord with these, but I couldn't get them to pull through the cord, even after cutting away the center and melting the outside around the fid. Maybe there's a smaller version that I'm overlooking. br>br>This bracelet's "end" is on the left side. As you can see, these allow you to melt the cord by pulling it through to the back of the bracelet rather than leaving one end on top. br>br>Recent changes - I included a photo that compares the diameter of type II and type III fids. You can also see the threading on the inside, which helps to keep the paracord in place. Who knew there was so much I could buy to make my life easier?.
I purchased a variety of fids. My latest serial hobby is making paracord bracelets, and as usual, I have to collect all of the cool components. I purchased a variety of fids but was unable to get them to function as I had hoped. I made the decision to purchase the Jig Pro set. This set of Jig Pro Fids is the best addition I've made to my paracord bracelet-making arsenal. Splices are best made with the thin and sharp end. It's also great for finishing threading, which allows for small hidden burns for a professional-looking bracelet. My paracord strand is always gripped tightly by the thread end. This is the best Fids set for making paracord bracelets.
We already had a set of fids that we use with 550 type III paracord, and this set has a sharper point that works much better for finishing the decorative knots on our "get-away" kit. Whips on a motorcycle are known as "back" whips. Once we start lacing multiple strands up through the center of the knot, it becomes quite tight. When compared to our old rounded head style fids, these fids cut the time it took to tie knots in half. By threading the cord into the end, they fit 550 cord perfectly. For knot work or lacing smaller diameter cord onto 550 bracelets, these are highly recommended. Simply melt the smaller cord onto a 550 strand and thread it through the fid's end. 550 cord is used for the bike whip, and 550 cord with nano cord interlaced using the fid is used for the two bottom bracelets.
These fids are a lot of fun. 180-inch diameter (or 4. Tip diameter: 6mm is . At the point, it is 0. 05 inch (or 1. 3mm), and the 'tip taper' is about 1 inch of the overall length, resulting in a long, slim point. The overall finish is excellent; I would give it a score of 9 out of ten. This fid will not snag any fibers. br>br>Incidentally, I also purchased one of the less expensive fids on Amazon (and received exactly what I paid for). The $2. 50 discount fid has a poor tip and resembles a nail. These two fidget spinners cost $5 each and are well worth it. I'd like to find a threaded eyelet to use as a keychain for these.
It's exactly what I needed for military type 550 paracord. If you work with paracord often, you'll notice that there are sometimes significant differences in the size and density of the cord. Cord purchased at box stores tends to be thinner, which means the jigs have smaller openings. Without cutting, burning, and shaping, larger/military size cord will not fit. Even then, it can be difficult. It screwed in smoothly, tight, and held in these jigs right out of the package, with only burnt ends on the cord. In addition, the shorter length and sharper point made handling and slipping through tight weaves much easier. I used them to weave cord for a dog leash handle through square braid and four square round braid, which I could not have done by hand and which required the use of clamps or tweezers. I'll keep experimenting, but I'm already ordering two more of these because I like them so much.
I'm new to fids, but these are really nice, and they're one of those things that I didn't realize I needed until I saw them. I looked at a thousand fids on Amazon before settling on these because they have a 'pointier' point than the others. That turned out to be a wise decision, because the pointier end has proven to be just what I needed to work a cord in tight spaces. On one hand, it works extremely well. a piece of advice for newbies like me: It's easier to'sew' the ends in if you leave a longer piece of cord out. However, if you have an overabundance of energy, short end on your piece, push the fid into the piece where you want the cord to go, then screw the cord into the fid to pull the short end through.
Good product. br>Here are some things to consider before purchasing: br>br>When I first got this, my biggest concern was whether or not the connection between the fid and the extension would be secure. The connection is extremely strong, and I have no concerns about how it will perform in the future. br>br>The tip of this device is quite thin. So far, it hasn't snagged on the cord, but I can see it happening in the future. If it bothers you, it's easy to fix with some sandpaper. However, it isn't a major issue. I intend to keep mine in its current state. br>br>The opening on the back of this thing is very tight for paracord; it works great, but you should make sure that you melt the end of your paracord cleanly, with nothing sticking out past the diameter of the cord; even a slight taper on the melted paracord would work well. It's not too small; just keep an eye on the ends when forming them. br>br>Apart from that, it functions, looks, and feels fantastic. It has a more comfortable heft to it than many of the aluminum ones, and there are no bare spots later because of the lack of cheap anodizing. br>br>I'd buy it again in a heartbeat; Make a secure purchase.
I've used these fids on both 550 paracord (7 strand) and leather, and they've performed admirably in both situations. I've never had one pull free while using them because there's enough thread on them. I prefer these to any other fid I've tried because the point is perfect for lacing without being too sharp to catch on the cord.