Racor PSM-1R - Wall Mount Wheelbarrow, Patio Furniture, Chair & Ladder - Garage Storage Organizer
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
No problem, this ladder will hold my 22 foot Little Giant ladder There is 44 lbs of weight on my ladder. It's been a while since I bought a bracket, but this one still holds up just fine. This is a great item that I highly recommend
Mounting hardware can be found in a vertical orientation. Not at all.
It looked like a joke to me when I first saw it. This is a great set of ladders to hang. Is that a wheelbarrow hanging? There is no way they can fit on the floor. They would stick out so far that they would take up more space than if they were sitting. I do not want to lift my wheelbarrow up to hang on the wall because it is so heavy and big. You could definitely hang it up by the little cross member in front of the wheel (mine has one regardless, and most wheelbarrows I've seen do). I would just make sure it's not much higher than just leaning it up against the wall would be. The alternative is to have a hernia from lifting it and that would not be safe at all. I would say it would be more of a matter of securing it in place rather than hanging it so it wouldn't skid if you bumped into it. There are specific wheelbarrow hangers that look like this one but are longer so the hook is further off the wall, so the wheelbarrow will hang farther up and down -- if you really want to hang it up and take up less space, they are available. You put it on the wall as if it was parked there. This was a legitimate question and not a troll. I hope this helps.
It is sturdy enough to hold a bike it simply needs to be adequately attached to a stud to secure it. In what way will you attach the bike to the bracket? I have a question. There is only about an inch of space in the slot.
Selected User Reviews For Racor PSM-1R - Wall Mount Wheelbarrow, Patio Furniture, Chair & Ladder - Garage Storage Organizer
It received a near perfect rating, but I gave it a five-star rating. 4 was what I was going to give. The installation of this product is easy. This is the wall hook I got for attaching my wheelbarrow to Obviously, you'll have to lift your wheelbarrow up onto it once its mount (obviously), so be sure you have enough clearance (from the ceiling) and are able to lift the wheelbarrow (it can be heavy and difficult). Here are some points to consider Observations 1. You can measure how high you want the wheel barrow mounted, with its wheel facing the ceiling, and mark the spot on the wall where the bucket's back rests. 1. . 2. The stud(s) in that area should be marked with a stud finder. Lastly, 3. You're able to mount the device if there is a stud that aligns with the center of where you want to mount. Then you might want to mount a board to the adjacent studs.
4. Mark the holes with a pencil and use a level to mount the board, if necessary. Then, adjust the level to position the storage bracket, if necessary. 4. *br Mark two pilot holes where you want the screws to go in pencil. You need to use a drill bit that is narrower than the threads on the supplied screws. The sixth point. With the PH2 driver you can now install the bracket using the included screws and you're done.
Now let's talk about half of it The star rating has been lowered. When the wheelbarrow is mounted on the wall, the top of the wheelbarrow will tip away from the wall until the handles catch in As a result, the screws are put under even more outside pressure in addition to the downward force. It seems to me that they may become less durable over time. A threaded storage hook attached to the top of the wheelbarrow is what I used to solve this problem. I can rotate it After I upload the picture, I'll include it. I believe this is exactly what I searched for, and it works as well as it should. gave a rating of 5 stars instead of 4, since I chose the product based on my erroneous assessment. Material that is of high quality. The installation process is easy. It is a very basic tool that needs to be understood. If you need help moving the wheelbarrow, you might consider asking for assistance.
Since I have been getting these things, I have probably bought 10 of them. Besides ladders and wheel barrels, there are so many other uses for ladders. My garage and storage areas as well as the interior of my home are equipped with these units. My experience with it includes using it to hang a very heavy 26 foot folder ladder, as well as a couple of lightweight fiberglass ladders and aluminum stepstools. Besides hanging my spreader over my garage door, I have also used it for storage of tools. It was used to hang a stroller in my garage just recently. So they do not appear as industrial, I usually spray Rust-Oleum textured paint on the hooks and screws once I install them in my house. The two drying racks I hung in my laundry room are just a couple of months old. This is probably overkill, but the price isn't too bad, and I love the solid feel of them.
According to the description, it fulfilled all the requirements. I found this same holder at Lowes for only These are on sale here for $79 and I purchased both of them for less than what they are asking. I used the same material, same design, and same dimensions as before (I didn't use screws this time)- The brand of the product was different, so I would have sent it back, but I had already hung it up. This was a lesson to be A personal recommendation for a friend would not be to buy this Racor holder because of its high price. I would recommend purchasing a holder of this design instead.
I stored it outdoors so that it would not be an eyesore. I was concerned about the value. At around $10 per hook, if I needed two, it didn't seem worth it since I could get I can still add a ladder to a wall mount with no difficulty since my ladder juts out far enough to enable me to do so easily. My 3/16" hole was pre-drilled with a masonry bit then a 1/4 x 1 3/4 concrete screw was used to attach the unit to my stucco block wall (see the attached pic) these screws bite into concrete, and thus did not require an anchor. Whether you are wanting to hang your ladder vertically or horizontally, this low-profile hook will give you just enough clearance to do so without needing to buy a 2nd unit to balance the weight.
It was shared by someone else. you place the handles of the wheelbarrow above the barrow, this method will not work for you. It will only cause the wheelbarrow to Don't buy a wheelbarrow if the handle isn't the same height as the top of the wheelbarrow. I rigged mine up with a top hook and bungee cord.
Initially, it appears that this is just a metal bracket with a couple of holes. It is my pleasure to tell you about this amazing invention. My love for them is so great that I have purchased three of them for different purposes. Despite it being low-cost, it's not at all bad A big reason why it's so helpful is that it keeps track of your profile. Besides being obtrusive when not in use, it isn't in the way. A folding card table was hanging in an attic storage area when I bought my first one. It worked like a charm. Second, we hung a ladder 6' high on the back of a shed in order to allow it to be accessed from above. I must say, it worked perfectly again. After that, I purchased and tried a third one, hoping I could get my wheelbarrow off the ground with it. Definitely a success! When the handles are down, it sits in the edges of this bracket, which means it isn't flush with the wall, but it is pretty close to it. In addition to being unnecessary, it is quite expensive that's why you don't realize its value right away. I highly recommend this book.
The top step of the ladder is where I hung a 6' ladder on the wall. It needs to be anchored to a stud (not just drywall), so if you want to place the ladder in a certain place, you'll need to attach some wood across the closest studs and attach this mount to that All of that's fine and dandy, but for a ladder the slot that holds the step is either too wide or too small for the ladder to be kept By drilling two holes through the front of the mount and filling most of the slot with a 1x1 piece of wood that extends past the ends of the mount, I was able to fix that issue. Now I feel so much better. Overall, the mount is a solid piece of kit that will hold up to a decent amount In addition, I added a couple additional screws to the top of the bracket as I didn't think one at the top and one at the bottom of the bracket would hold up in the long run and after many cycles of taking the ladder down and putting.
What a great idea! As my ladders hung from the ceiling, I had two T-frames mounted on them As a ladder climber, I would be bumping my head on ladder hooks all the time. When I saw this, I really hoped it would work for my Wagner extension ladder. There are several types of frame ladders. I love how it works. With the T-I have been able to maximize my time Now there are hooks as well.
Related Products For Racor PSM-1R - Wall Mount Wheelbarrow, Patio Furniture, Chair & Ladder - Garage Storage Organizer
