3M 5P71PB1 6000 Series Particulate Filter P95, 10-Pack
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In the box where I received mine, all ten of them were loose. The product comes in its own
Each application has its own requirements. 2071s are used in a wide range of settings, here is the info I copied from 3M's website 5P71 Using the right cartridge, spray painting, lacquering, petrochemical manufacturing, pesticide spraying and agricultural applications may be possible at concentrations up to ten times the permissible exposure limit (PEL) at 50 times the PEL, full facepieces may be used. In order to claim a protection factor over 10 in the negative pressure mode, full facepieces need to be quantitatively fit tested. Protect against only particulates including dust and dirt using 603 adapter. In environments which are immediately dangerous to life or health (IDLH), do not use this product. Angular references should be identified with this symbol. *Assembly and mechanical,* Cleaning,* Painting 2071. Compatible with 3M* Respirators of the 5000 Series and 3M* Cartridges of the 6000 Series, 3M* Adapters 502, and 3M* Half and Full Facepieces of the 6000, 7000, and FF series. Filter holders with bayonets are included in the 400 Series. Fitted properly, the eyewear can be used for numerous applications, such as grinding, sanding, and welding, up to 10 times the Permissible Exposure Limit (PEL) when using half facepieces or 50 times PEL when using In order to claim a protection factor over 10 in the negative pressure mode, full facepieces need to be quantitatively fit tested. If you have an immediate danger to life or health (IDLH), do not use this product. The recommended applications are * Assembly and Mechanical, * Cleaning, * Grinding, * Laboratories, * Painting, * Sanding, *
My 3M mask's instructions show a picture of a filter inserted between the cover and cartridge in figure #3. As stated by the directions, the writing should be facing out towards the canister, leaving a perfectly white surface to be faced towards the world.
Thank you for contacting me! Our team can assist you with your request, however, due to the technical nature of your request, please call us A 4630 M-type machine 8 a.m. to 4 p.m. The time is 30pm American central time. Your information can be gathered and the best product suggested to you based on your needs can be provided. We are looking forward to speaking with you soon. Thank you again.
Selected User Reviews For 3M 5P71PB1 6000 Series Particulate Filter P95, 10-Pack
There was a noticeable difference between this filter and the others I have been using. It is essential that I replace every day. I could get two more from the other two During this time, the batteries need to be replaced every 3 days. Adding $2 to the budget. From 00 to It was not worth the 00 per box that I saved. As a stone worker, I'm exposed to a lot of dust. I found the Filters to be adequate, but they weren't up to my expectations.
Currently, I am using a half face piece respirator from 3M 6300. An organic vapour/acid gas cartridge of 3M 6003 is connected to it. As well as the particulate prefilter, the respirator is not directly connected to the 6000 series particulate prefilter. Using an adapter, the 6003 cartridge connects to the respirator, and then the 6000 prefilter is attached to the 6003 cartridge by using the 3M 501 filter retainer. In addition, there are particle filters such as the 3M 2091 that attach directly to the 3M 6300 half facepiece As well as me, I use them. As an in- As a precaution, I store my 6003 cartridges and the 6000 prefilter in separate double Ziploc bags while I am between jobs. My half mask has been working well for 42 years, and neither it nor the filters have ever given me any trouble. It's not the same one mind you, I have changed them as they have worn and tattered over time. Nevertheless, I always purchase the same masks and filters every time. It is quite possible that this mask setup has prevented my lungs from becoming damaged over the years I have In addition to epoxy, conversion varnish, post, pre catalyzed, nitrocellulose lacquers, and water based finishes, in addition to oil based primers and paints occasionally, I use conversion varnishes and epoxy. As long as I have a properly functioning respirator, I do not smell anything. Whenever it becomes tough to inhale, I know it's time for me to change my filters. The 3M filtration products I've purchased have always stood behind me. The following are excerpts from David F. 's document.
I agree with most of the comments that these are great filters at a great price compared to brick and mortar stores. As you can see, this is how I've set it up. - - - The company's nbsp.
A for covid- According to them, protection is 19 years old. Found out recently that they are KN95 filters (stated on the filters themselves-- The photo is on the right). Surgical masks are required must be FFP2, KN95/N95 and N95. As a result, you ought to be able to find them if you need them.
It was fine, but I would have liked retaining clips with them. At the time I first purchased them, they did not mention that the clips come in separate boxes. Neither the clear clips nor the organic vapor cartridges can be used with these. Clipped right over the outside of the vapor cartridges, these simply clip on and stay.
If not, then it is a disaster. There's no need to worry about it! By adding these to the existing 3M filter, they will be able to trap It is our hope that they will.
Our company is in the painting business and we Their importance cannot be overstated. That is what makes the price so high not cool.
There are two types of The filters I use to spray finish on woodworking projects are less expensive to replace than the vapor cartridges. It's been a good pre-game You can save money if you use a filter to extend the life of your cartridge. This filter will need to be attached to your cartridges by using the 3M Respirator Filter Retainer 501. Wood dust is also very well suited to P95.