BeA 71/16-421 Fine Wire 22-Gauge Stapler for 71 Series or Senco C Style Staples with 3/8-Inch Crown and 1/4-Inch to 5/8-Inch Leg Length
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This is not the case. I love it. It is by far the best upholstery stapler I have I found it to be well
There are two types of connectors, but you must choose the one that fits the system you have. Few air tools come with connectors, and those that do don't usually fit most systems.
71/16 and the BeA 71/16-02 Despite the fact that it weighs about 2 ounces, the 421 stapler is not lightweight. There are no visible signs of weight loss. In addition to the packaging, there is additional weight.
Almost any size compressor will work as long as it's 6 gallons or more. To work properly, the regulator should be adjusted at 90 psi because that is the pressure the staple gun needs to maintain. Considering that three staple guns are being operated with one compressor, I usually set the gauge at 110 psi. As of right now, I'm using a husky 30 gal oil-lubricated compressor 5-HP There are six days in
Selected User Reviews For BeA 71/16-421 Fine Wire 22-Gauge Stapler for 71 Series or Senco C Style Staples with 3/8-Inch Crown and 1/4-Inch to 5/8-Inch Leg Length
An overall rating of 4 stars equals a performance rating of 5 stars A rating of 3 stars was given to the We are pleased with the quality of the stapler's fit and finish, as well as the design. On day 1, we used it heavily to staple upholstery into plywood, red oak, and hard maple using 1/2" staples. We shot hundreds of staples at the pressure the gun's manual recommended. Every staple was fully seated, and there were no misfires or bent staples in any of the cases. Please take note of the following warning A safety device or interlock is not included with the stapler to prevent accidental discharge. This stapler does not have a trigger lock that must be manipulated, a device that compresses when you press it against the piece you're firing into, or some other interlock that must be manipulated in order for the gun to fire. The design is thus awarded 3 out of 5 stars. Please see the notes below for additional information It is given that (1) the max recommended pressure indicated on the gun itself does not match the maximum pressure in the instruction guide. In addition to the maximum on the gun itself, I also used the max on the clip. One version of the gun has a long nose that is useful if you need to get into tight areas where the gun cannot reach because the furniture is (4) This staple gun does not come with an enclosure.
Back when I was a teenager, I worked in two upholstery shops and this staple gun was considered by most to be the best. There were others on the shelf and they were considered backups. It can put staples in as fast as you can pull the trigger without jamming Never have they failed me, no matter how much abuse they have received. Using the top as a hammer to smooth out staples driven into the wall at an angle is a pretty common use of the top, although I wouldn't recommend it.
The stapler we use in our business requires a significant investment because it is a high quality German tool used every day for thousands of staples. I haven't seen a single problem with it in the last two years. As high as 90 psi is needed to drive staples into hard wood and fiberboard. I find it amazing that sometimes you start to see the value you paid for right away and in this case if you want a quality, reliable stapler for production then this is it. I can't say enough good things about this product. Unfortunately, it costs about 40% more now than it did a few years ago, so I would have to look around if I were to buy another, but it's one quality tool you shouldn't miss out on.
My other drugs have been around for years, abused and used every day, and they are still going strong. It is easy to repair if or when the need arises.
The arrow and other inexpensive staplers were a waste of money, with the result of being This stapler has been in my possession for a little over a month now and I.
You cannot get a better staple gun for the price than this. My first purchase didn't include an air connector, but I later managed to purchase one. All the connectors I had would not fit the guns because they appear to have metric threads. It was cheaper to send it back than to ruin the gun by forcing an ill-fitting connector into it. It would be great if There is a high probability that it will happen- You should buy the same products.
This product is of good quality and performs It is time to refinish 14 dining room chairs in addition to a few other items I have used this tool to cover my furniture and have not encountered any.
This tool will be a big hit with you. Throughout the last 50 years, I have owned many staplers and none were as well constructed and pleasant to use as the BEA stapler. The stapler has very low noise levels and consistently fires a staple every time, so we can also use it as insulation and building wrap. A stapler such as this will become a favorite.