IRWIN Screwdriver Bit, Impact Performance Series Double-Ended (1903509)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Yes, the first tip is a 1PH, and the other end is a 2PH.
Like any other piece of information. There is no increase in weight.
There are two sides to it. There is a 2 on one side and a 3 on the other. It's made to fit in an impact driver like any other impact bit. It's extremely useful, and I use mine on a regular basis. The only drawback is that it isn't magnetic, so you'll have to re-magnetize it from time to time.
This item is currently in storage, but if my memory serves me correctly, it is only double-sided. P2 bits came to an end
Selected User Reviews For IRWIN Screwdriver Bit, Impact Performance Series Double-Ended (1903509)
I'm giving the seller a two-star rating because he didn't have the foresight to list the contents of this set. stars. These are reversible bits, and the picture clearly shows a Phillips 2 head on one end, but there is no indication of what is on the other end. Now that I have the set, I can see that there are two bits with Phillips 2 on both ends, one bit with a 1 and a 2, and one bit with a 3 and a 2. It's clearly marked on the package and, if you flip the bits over, on the other end of the bits as well. All the seller had to do was show a photo of the package, which included the manufacturer's nice display of the two ends of each bit. br>br>I asked other buyers the same question, but their responses were ambiguous. So, if you're wondering what you'll get for your ten dollars, look no further. After I've used these, I'll write a more detailed review.
What I didn't care for about this set was that it wasn't as "assorted" as I had hoped. After all, what good is a double-sided bit if both sides are identical? There are three phillips in total - All of them are the same size, and two of them are attached to the same shaft. There are three square bits, all of which are number two, and two of which are on the same shaft. (I was looking for a 0/1/2 square. ) br>Here is the complete list:br>* phillips 2/square 2br>* phillips 2/phillips 2br>* phillips 2/flatbr>* phillips 2/flatbr>* phillips 2/flatbr>* phillips 2/flatbr>* square 2/square 2br>* torx 25/torx 25br>* torx 20/t However, the sizes should have been stated in the description.
They have unique engineering features that enable them to sit deep in the ground. Take a firm grip. It goes with everything. This is the first time I've seen these. I usually use high-end impact bits from Milwaukee, Bosch, DeWalt, and other manufacturers. On the whole, I'm satisfied with those brands. But I'd have to give these Irwin Impact Power series Irwins a higher rating. Was taken aback. Everyone has their own preferences when it comes to tools. These Irwins, on the other hand, are right up there in terms of quality. Have a wider range of options. With this set, I can get exactly what I need without having to buy extras. These bits save me money up front AND their high quality lasts longer/saves me more money in the long run, which is nice. br>br>These are extremely tough bits with excellent engineering features. They have a hold on you. hold on. That appeals to me. I also appreciate the variety of sizes available. PH1, PH2, and PH3 are the first, second, and third positions on the PH scale. Because each end of each bit is the same size, I always have a back-up with these doubles. The finish is a no-nonsense black oxide. These double-tip bits are slightly longer than single-tip bits. That feature is also one of my favorites. Away from the chuck, there's a little more visual work space. The shade of blue is The gleaming chrome rings in the middle assist me in quickly locating these bits in my tool bags. br>br>In my 18v Bosch impact driver, it fits like a glove. Fits all of my corded Bosch, Milwaukee, and 18v, 14v Bosch tools. my non- screw with a big impact 1/4" quick connect drives are used by the driver. They are ideal for any situation. have an effect non- Drives that have an impact Clicks- a simple process There is no binding and it is very easy to release. Great attention to detail. Engineering of the highest order. I've placed an order for a second set. br>br>THE END RESULTS: With these double end bits, there are no negatives to be found. If I find out anything, I'll let you know. These Impact Series Phillips heads are impossible to go wrong with. Durable, powerful double-ended bits that drive like the devil are available. & It was a perfect fit for the chuck or 1/4" drive. You are free to do whatever you want with these components. I would strongly suggest it. br>EASY TO GET **** 5- ***** STARS.
I ordered two sets: a five-piece set and a seven-piece set. The bits fit fine in one magnetic collar, but the holes in the other magnetic washer were too small for the bits to pass through. When comparing the two holes, one has a much smaller diameter, and forcing the bit through it pushes the magnet out of the plastic casing. If multiple screws are being used on a single project, the idea is great, but if the magnet does not fit, the entire set is useless. To have a spare magnet, I'll either have to buy another set and hope the magnet fits, or abandon this Irwin project.
Impact bits that are extremely useful! Since my impact driver became my most-used tool, I've been on the hunt for bits like this for years. It's only natural to have them double-ended with the two most common bits. Isn't it true that a lot of these bits have the same type of bit on both sides? I'm not sure what that's supposed to mean. br>br>Fits perfectly in both the chuck and the side bit holder of my Makita impact. Please keep in mind that these bits will not work with magnetic or "quick lock" extensions. The magnetic holder included with the bits is also very useful.
It's fantastic that each bit has two distinct heads. Especially useful for drills and drivers with only one bit clip. You won't have to rummage through your pockets or toolbox for the rest of the parts this way. I wish there was a wider range of options so you could create your own 6-bit combination. Even though I'm sure I'll never use many of these components, I bought this kit because there are a few that will make my life much easier.
It's fantastic that each bit has two distinct heads. Especially useful for drills and drivers with only one bit clip. You won't have to rummage through your pockets or toolbox for the rest of the parts this way. I wish there was a larger selection so you could buy individual ones with whatever combination of two tips you wanted. The only drawback is that they are a little pricey for what you get. br>br>.
This is what I use with my Milwaukee 12v screwdriver, which has a hex-style quick-release collar. In my line of work, having both a phillips and a flat head on one bit is extremely useful. Because I don't use it for high-torque situations, I haven't put it to the test in that regard. It also came with a magnetic sleeve that you can slip over the bit to help keep screws in place while working one-handed. I didn't find many alternatives, so Irwin carved out a nice niche for himself.
Related Products For IRWIN Screwdriver Bit, Impact Performance Series Double-Ended (1903509)
