GODESON 1/4" NPT Tank Valve, Anti-Corrosion Brass Schrader Valve with 1/4" Male NPT,Using with Air Compressor Tanks(Pack of 4)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
We simply use PTFE THREAD SEAL TAPE in conjunction with the valve.
Yes, as long as there is a suitable location for it to be installed. Instead of using an air compressor, I would suggest using a bicycle-style hand pump.
They are, in fact, 1/8-inch thick. 27pitch
1/4" NPT (National Pipe Thread): Simply use a pipe thread tap to mate the threads (pipe dope to seal the threads).
Selected User Reviews For GODESON 1/4" NPT Tank Valve, Anti-Corrosion Brass Schrader Valve with 1/4" Male NPT,Using with Air Compressor Tanks(Pack of 4)
I built a smoke machine to find a vacuum leak in my Honda CR-V. To push the smoke into the vacuum hoses, use a valve and a bicycle hand pump.
This isn't an NPT thread in the traditional sense. This remains loose, does not bind properly, and does not seal air when screwed into a properly sized 1/8" NPT female fitting. br>br>A properly threaded NPT thread will bind and require a wrench to tighten. To ensure an airtight seal, Teflon tape or thread sealant are used in conjunction.
Air should be automatically added to the well tank by air control valves on water wells. They frequently fail to do so, causing the tank to solidify, causing problems with the well and plumbing. I manually add air to the well tank and maintain a good air blanket by using the schrader valve. As a result, the well pump cycles less frequently and the plumbing is spared hydraulic shocks.
These are what I'm using on my 14 gallon fuel tanks. I don't have to lift them up any longer to feed them by gravity. Simply add 10 lb. of air to the tank. , and the fuel is discharged into the atmosphere. It's that simple.
I was putting something in the tank. The valve sheered off as I was tightening it down. My extractor was able to remove the valve without damaging the threads, which was fortunate because it was probably of low quality. I'll test the tank's capacity by filling it with air tomorrow. I'm hoping it's not as bad as it looks.
Great product, but I wish I could have purchased all of them at once.
They appear to be expensive, but they deliver. It goes on the end of my professional tire gauge and can be used at any pump. It's simple to fill tires to the correct pressure.
works.