Milton Industries S-765 HI-Flo V-Style -FeetA,M,V-Feet 1/4-Inch MNPT Brass Body, Single
Score By Feature
OveReview Final Score
Questions & Answers
As I understand it, this part is a 6 It is the unit of ball
This is in relation to both an air compressor and an 11 gallon air tank with these fittings. Whenever I have these under pressure I maintain it at about 100 psi and have not experienced any leaks since the past
On the inlet side, these are not designed for liquid pressure and can only handle a maximum of 300 psi.
The best guess I have
Selected User Reviews For Milton Industries S-765 HI-Flo V-Style -FeetA,M,V-Feet 1/4-Inch MNPT Brass Body, Single
Now that my second set of these quick connectors is finished, I will be done with them. You may lose air pressure if you disconnect the air tool from your air tool anchor and shut off the compressor or turn down the regulator as soon as you disconnect the air tool anchor. Due to this, I have added ball valves to my air lines in order to shut the air off. After a long period of heavy use, some air fittings can fail to hold the air back. My last set of these (a different brand, no longer manufactured), which was about 4 years old, lasted nowhere near as long as these. Only six months have passed since the current connector was installed.
Though, they are only good for HVLP fittings! It advertises that it can work with both regular sized fittings and HVLP fittings of a larger diameter. A high-quality lens makes the most of it They work, but are difficult to insert a fitting or tool into due to their construction. When HVLP fittings are used, they click closed and open up smoothly. In spite of this, they do not work well with smaller Type M or V They have been a part of my daily routine for a few months. The first time I used them, they worked with all fittings, just as they advertise. Today, however, I'm going to use a NON-FITTING The coupler will be difficult to press in and lock if it is a HVLP fitting, and will not be re-usable if it is a PP fitting. To stop the leak, you need to remove the fitting, seat the valve, and pull the collar back, then insert and remove an HVLP fitting. There is 125 psi of air coming out, and you have to use an HVLP fitting to stop the leak. *BOTTOM LINE What will May bring? Nevertheless, they may be suited only to HVLP, but still they may be difficult to fit fittings with. We would not recommend this product for.
From then on, air continues to come. Since about a year ago, I have bought six of these quick release couplings, and 2 of them have already You don't get the proper closure when you disconnect. From then on, air continues to come. Because of this, I would have to leave the air hoses connected under pressure. This is not recommended by the hose manufacturer.
The best thing about them is they can be used effectively with all my "standard" male industrial connectors. Using a Milton V fitting, I plugged a pneumatic scaling tool borrowed from a neighbor into the male fitting of their auto garage style Milton caps without any leakage. It had never occurred to me that I might need a drawer full of adapter connectors, but the V style connector worked well I would be able to use FLO female connectors with any male plug I may.
became fed up with the cheap air fittings that leaked from three compressors, hoses, and tools from big box stores, HFT, etc. Over the last four years, I have replaced all fittings with Milton's and have yet to hear any air leaks, even though I do not use the equipment on a daily basis.
One complaint I have is that the male NTP fittings seem undersized, since I had to wrap multiple layers of teflon tape over them to avoid them bottoming out, even though they snapped into the female fittings It does not leak, so it is not a major issue.
There is no way to reverse it The connectors that I purchased came with rings on three of them. It was purchased in June, now it is October, and I am not able to return it. There was only a very limited use of the item before it failed.
Throughout my vehicle, I have replaced all the original hose fittings with Milton High Flow fittings. As a result, I had to replace my air compressor's standard 1/4-inch brass connectors in order to maintain compatibility. It works beautifully the collar is always slightly retracted when the plug is inserted, so it creates a clean and professional look If you hold the collar with one hand, it pops out and the plug is caught. The air leak is not present. The product is made well and works well.
Related Products For Milton Industries S-765 HI-Flo V-Style -FeetA,M,V-Feet 1/4-Inch MNPT Brass Body, Single
