Akro-Mils 10126, 26 Drawer Plastic Parts Storage Hardware and Craft Cabinet, 20-Inch W x 6-Inch D x 10-Inch H, Black

I'm planning to purchase four moors in the near future. I keep everything in these, from nuts and bolts to bearings and electronic parts, labeling them with a label maker. It's a huge help in keeping my small workshop organized! I attempted a rip-off of the rip-off of the rip-off of I went off-brand, and boy did I pay for it. That other brand was falling apart with just a little bit of weight, but these Akro-Mats were still holding up. Mils are without a doubt the best option! br>br>And now for a useful 3D printing tip: I designed some 3D-printable drawer dividers! As you can see in the photo, I used blue ink to print mine. These drawer dividers will come in handy a lot. I've put the files up on Thingiverse, where you can get them for free: ) Just type in "ULTIMATE Drawer Divider Collection" or "Akro-Mat" in the search box. Mils" will be one of the first results to appear. br>br>I hope this information is useful to someone!.

Zahra Bauer

| Aug 19, 2021

However, the information is mostly repetitive; nonetheless, it's a smart and durable organizer. It's best to keep it at eye level so you can see what's inside the drawers. I prefer the acrylic transparent drawers to these because they allow for more visibility. Acrylic drawers, on the other hand, are more prone to cracking than these. And you can see right through these slightly cloudy drawers, whereas the acrylic drawers would have been significantly more expensive. Also, when rating products, people should consider the price. So, for the money, these are fantastic! It's time for reviewers to stop claiming that the DIVIDERS / SEPARATORS aren't included, because they are! They're on their way to a new beginning. As part of the case's backing, you'll find a tear-away form. VIDEO IS AVAILABLE FOR WATCHING. The plastic case appears to be of adequate durability. However, I believe it would have been prudent for them to include a back middle bottom to top support, as removing all of the dividers appears to weaken the case's top middle. This, however, is just a guess. As I previously stated, the case is made of fairly durable plastic, so it should be fine. If break- When the back drawers are removed, the drawers appear to be able to go all the way through and out the back. But this isn't the case because every drawer has a stop tab built into the top lip opening. However, you don't want to tip it backwards because things might fall out. So long as you don't tip it backwards, everything should be fine.

Brayan Parker

| Sep 22, 2021

For electronic repair, I purchased all three bins (24, 44, and 64) as a set. I've stacked the set and tucked it away in a void in the wall. Prepare to remove some of the bins' clear excess casting material. I had to do this on 20 of the bins or they wouldn't slide properly otherwise. It takes only 3 seconds to complete, but it must be completed.

Jeffrey O’DONNELL

| Apr 30, 2021

This "made in the USA" cabinet does not meet my expectations. Except for the bottom row, there is no support for the back 60% of the drawers. This means that when I load the drawers with nuts and bolts, the cabinet will sag a lot. As you can see in the photo, there is no back support. All of the plastic parts you see are four pop-ups. drawer dividers for 16 drawers, as well as some oddly shaped dividers for small drawers. I'm curious how much it would cost the manufacturer to support the back and add at least four more full-size seats. dividers of various lengths Maybe $1. 00? In comparison to some I've had for the past 20 years, this is a sad cabinet.

Iyla Kaufman

| Nov 03, 2021

While the unit had all of the features we wanted in terms of drawers, size, and so on, the dividers were a problem. I noticed this in another review and realized I should have read it more carefully: The dividers are molded into the back of the case and must be cut apart one at a time. Okay, fine, but there are 44 drawers in this cabinet. I didn't notice where it said how many dividers you get: 6 drawers for small drawers, 3 drawers for large drawers THIS IS THE END OF IT! If you require more, you should either look elsewhere or make your own. What happened to the days when dividers were provided loose in a bag for each drawer, eliminating the need to cut them up yourself?.

Marvin Owen

| Nov 02, 2021

I deducted three stars because of the following: 1. br>br> These drawers are very easy to open and close. The drawer-catching lip is either too far forward or does not have a bottom lip. The bottom of the drawer will slip out and the drawer will fall if you pull it straight out or at a slight upward angle. When you open the drawer, you must be cautious. 2. br>br>1. br>br>br>br>br>br The drawers are very easy to pull out on their own. These drawers will start slipping out if you place it on a work surface that is prone to vibrations or minor movements. To avoid this problem, place a couple of wedges on the bottom of the unit and tilt it back slightly. 3. br>br>4. br>br>5. br>br>6. There are only eight small divider tabs and four large divider tabs included. Because there are no larger drawers and only eight small dividers, the large ones are completely useless. Furthermore, they are molded into the black frame, necessitating cutting them out and sanding down the plastic edge so it does not catch when pulling the drawer out. It's odd that one of the drawers didn't come with a set of standard drawer dividers. 4. br>br> This is also the type of plastic that does not accept adhesives well, making it difficult to catalog these drawers. Printing or mailing labels will not adhere effectively, and even high-adhesion masking tape will not adhere effectively. Expect peeling labels after a short time. br>br>For the price, it should either come with more divider tabs or the drawers should stay in place and not be as easy to pull out all the way.

Marlowe HOWELLS

| Nov 29, 2021