Titan 12710 Tamper Proof Star Key Set
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You raise an excellent point. (Both ends) I measured mine carefully, and the maximum "practical" length reached into a recessed screwhead was 1.77 inches Getting a grasp on things while still staying in control About 1 percent of the population A 13/16" or 45mm is known as a The assumption is that you'll have a clear path that can be used to swing or rotate the tool. If you need more depth, you will need a conventional-type drill A screwdriver with a Torx tip that can be manipulated through a handle. Thanks a lot
The product was designed and manufactured
In fact, yes. The knives I have are three different sizes made by three different manufacturers. These are the perfect sizes for The only downside is that it is not as strong as I would have liked. Trying to tighten it too much or being rough may result in the knife breaking.
I am not at fault.
Selected User Reviews For Titan 12710 Tamper Proof Star Key Set
My intent was to save some money, so I did not want to spend money on a Wera set. I received a key set that is exactly like that shown on the Titan website. I did my best to make sure that the photos were Basically, I had two issues with the set I received -- quality control and the set itself. There is a small metal washer between each wrench. I was jabbed in the thumb by something sharp as I opened the set. As I examined the washer more closely, I saw that it had sharp burrs or pieces protruding from The two wrenches it was seated between were also very tight and hard to open due to this. I was able to fix the problem, but I would have appreciated it more if I hadn't had to fix another item that was purchased to fix the problem. Also, some of the smaller keys seem to be malfunctioning. One or two of the keys had very tight holes in the center. I should have known better and purchased a good set as this makes it difficult to get the key into the slot of the bolt.
I'll chalk this one up to, "I should have known better and spent the extra money on a good set. ".
For use even moderately, it is not suitable. This is a very good model. It seems as though the materials are of high quality All of the parts are of good quality, and everything stays in place when in Just so far, there have been no complaints. *additional information*additional information The materials did not appear to be as good as I had One or more of the spokes on some of the smaller bars has either twisted or, in one case, completely broken away.
The main reason I bought it was because of the T6 To keep my pocket knives in good shape, I use a set of T10 wrenches. Upon removing two pockets clips and attempting to remove a third, the T6 began to distort, making it unusable. It is usually no problem to loosen screws attached with blue loctite, which is normally no problem. To fix this problem I got a bit set for my ratcheting screwdriver to use with it, and the results were much better.
These things are as cheap as they get,I would give them 0 stars if I could. The center pin does not sit centered in most of them, and the metal used for it is terrible. An end is twisted off (and the end is removed). It was at Wal-Mart when the kicker appeared Walmart you can get a Stanley set for about the same price, I got it and I've been happy with it Be careful not to make the same mistake as me.
The one that all looks good and is well built and put together, but the problem with it is the holes in the center of every tool that are drilled so they will fit the security fasteners are not big enough, and none of them are It gets worse as you reduce the size. Thus, the last 3 or 4 sizes are completely useless since they are not able to fit because of this issue. As a result I will probably be able to drill the holes a bit larger, which at the same time will make them more centered so I won't end up with tools that are 50% useless. The tool will be functional after I fix the manufacturer's defects that either their quality control missed - that is if they have one - or if they just fell asleep for one reason or another. The company or person would put out a tool in this condition and sell it despite it not working for its intended purpose when it is not even working under normal circumstances. I couldn't afford to buy one of those, so I just use it like a star tool. There are already a few sets of those in my possession. It was necessary for me to loosen and tighten security fasteners, but unfortunately I didn't get the tool I needed!.
The information I was seeking was right here. It is important to have a set of star screw heads with separate handles if you work regularly with them. Nonetheless, if you simply need something small in your toolbox or workbench for the occasional occasion when you run into it, then this tool will be your best friend. It seems like she is doing well - This vehicle is designed to handle occasional light work. It will take a while for us to find and eradicate the last design engineer who thinks it is hilarious to specify these heads. However, until then, this tool will ease the irritation.
There are only a few very minor issues that need to be addressed. Compact and convenient, this product makes for a great tool bag item. Working with a 130lbs tool bag every day is a daily routine for me. In addition, I have a hard time carrying my tool bag around. This is one of my favorite tools to use when I only need certain tools for a job. As most of the screws and bolts I work with are Tamper Proof, this tool has come in handy. There is only one flaw I see The Allen screw that holds the entire set together has to be tightened over and over again or it will fall apart. That is the only problem I see. Additionally, I had one of the Bits on the set strip out on me. I have no idea how that happened since it is a hand tool only. In contrast, if they fixed the second and fourth issues this tool would be a five star product. It was only for that reason that I had given it 4 stars and 3 stars for durability.
Thread locker cannot be put on the screw holding the set together because it will prevent the set from folding. Buying the first one made me realize that I need to be smarter. It was actually a gift for some guys at work as well, since I had bought a few already. Despite the issues I mentioned, this would be a 5 star tool if the issues I mentioned were resolved.
They were able to accomplish the task I needed. They are not a very long piece, so I had to disassemble them to fit them in the room. As a result of my failure to read the posted Questions about length, I didn't notice that it was long. Although that is the case, they worked well and have lasted so far. Trying them in the workbox will see how they fair. Printed-on sizes are not etched onto a tool, they are printed on. I wouldn't hold my breath that the printing on the side will last.
Related Products For Titan 12710 Tamper Proof Star Key Set
