Powerbuilt 8 Pc Metric T-Handle Hex Allen Key Wrench Set w/ Speed Sleeves for Fast Spinning Action, Sliding Top Handle for “T” or “L” Shape, Long Shafts, Storage Rack, Auto, Bicycle, Moto - 941645

It's nice to see these t-shirts Quite a few wrenches have handles. There are a lot of them. When you use handle wrenches to tighten bolts, you can easily 'twirl' them while you are taking up the slack just before tightening the bolt. It's OK to use Allan wrenches of the L shaped shape, but they are not as fast to use (since you cannot twist Once the bolt is ready to be tightened down, you simply need to tighten it up. You should hold the bolt in your hand and tighten it tightly with the bolt driver. A simple process Easier than pie! I don't think there is anything wrong with this wrench set except for (And, no reaching for another tool)

The one problem is On the main shaft of the wrench is an anodized aluminum sleeve. There is a laser mark on the sleeve that indicates the size of the wrench. Unfortunately, this sleeve does not have a pressed-on look. There is a looseness to it. Rotate it and it will rotate. This wrench is not designed to be rotated due to the rotating sleeve, which makes it difficult for the user to be as productive as possible with this tool. Despite the fact that the tool is otherwise perfectly conceived, this is a serious flaw in its design. As a result of the loose sleeve, this review only gets a four-star rating. It is I, and the sleeve II. Once the Loctite had set up for 24 hours, the sleeves tightened, making it so the t-shirts are firmly attached It is much more convenient to use handle wrenches. This camera really appeals to me because of the way the T slide back and forth, as well as the spring-loaded detents The versatility of this wrench is greatly enhanced by this feature. Upon purchase, this tool set comes with a lifetime warranty and is made in Taiwan. You can find the part number and a toll free phone number on the back of the stand, which is a great feature if something breaks! (IF anything breaks, you no longer have to search for the manufacturer, Don't think twice, just give us a ring. Overall, this is a well built set that most mechanics will find very useful and time saving (once you Loctite the sleeves into I highly recommend this book!.

Macie Montoya

| Aug 18, 2020

When the 6mm wrench was used for the first time, it broke. There is a design flaw in that the t handle part of the wrench has a snap ring that is smaller in diameter than rest of shaft and can fail. Although they seem nice wrenches in theory, they did not feel as high quality as I would have liked and broke so I returned them and received a If you want higher quality, you should pay more.

Alonso Garza

| Jan 02, 2021

One of the biggest failure points is probably this one. there is no problem with the hex key fitting the nut. One of the biggest failure points on hex keys is this one thing. There is a bit of a sleeve miss with this top. Although there are certainly times when this feature is extremely useful, it only makes up a small portion of the user base. These have a bit of a weak point in the sleeving. The labels on the hex keys are easy to remove, but you lose the hex key size information. Those who use jex keys often may not have a problem identifying the size by sight if you are familiar with the key type. There is a note on the stand stating its size. Nevertheless, if I store them in a toolbox I might have a little difficulty finding the right size if I am not familiar with their sizes.

So, one less star for the sleeves and lack of labeling on the handles.

Kairi Contreras

| Sep 15, 2020

It took me a long time to determine that the hex wrenches come in sizes that jump a full millimeter each after I purchased a couple racks (metric and torx). There are a lot of screws with half-MM It is often the case that this set does not have the small sizes I need, while other wrenches in the set measure up to 11". As a defensive weapon, they can be very useful, but as screws, they are too much. The option to buy either a small wrench set or a large wrench set is more appealing to me. It doesn't matter how big they are, I don't need them. However, they are an excellent resource that I enjoy using.

Kyla Rush

| Sep 05, 2020

I find them to be very well designed and quite These were much more cost-effective and had a few extra features that were nice additions over other options when I needed some hex sockets with decent reach to work on my mountain bike. As for the sleeve on the tool, it is very useful, and the fact that the top bit slides has proven useful when torque needs to be applied Depending on the size, the detent on the sliding bit moves too easily in some sizes and too stiffly in others. However, overall it's a handy feature and does not pose a major problem. There's no doubt in my mind that these are great.

Aliza Jensen

| Aug 16, 2020

It's really great to see these. It is a great change from those L shaped hex keys. They are much more durable than those and are of high quality as well. Even though the blue sleeves could be fixed in place, which others have also noted, I still give this product a 5 star rating because they are awesome in any case. *Edit * The sleeves of my jeans won't stay in place because of these reasons Holding on to the sleeve is quite helpful if one wants to spin the wrench while holding it!.

Mekhi Thompson

| Sep 08, 2020

I appreciate it very much. Bicycles are almost exclusively used with them. This is the type of machine to which these will be best suited. The high torque and breaking off of rusted stuff is definitely not the best. In addition to those tools, there are others available. The majority of mechanics will be able to detect this limit immediately and keep the vehicle on limit. They have a flex to them, the spin function occasionally makes sense. Be careful not to let your apprentice abuse them! The tool is very useful for installing Allens, for example putting a new bike together.

Tanner Hamilton

| Sep 06, 2020

I like this set of quality wrenches, the only downside is that you can't "twirl" them since they are made with sleeves. In the case of this "speed sleeve" advertised but only on paper, I have taken one star off. You have nothing to gain from it The device is designed to be used with both hands! by hand regularly knows that the majority of the time you're holding something with one hand and screwing with the other. This sleeve makes it impossible to hold these wrenches between your fingers to pull out already loosened screws, or start threading them in. In order to accomplish this, I am taking my sleeves off. It's too late to return these since the return period has already expired and I don't have any other options.

Sergio Santana

| Aug 29, 2020