Festool 489571 Screw Clamps, 11-13/16"
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
You will receive 2 clamps with it. It was very easy to set up and very fast. You've got it down!
I measured 12 inches when I opened it all the way and unscrewed it. The clamping pad needs to be 25" inside to inside from the bar.
Selected User Reviews For Festool 489571 Screw Clamps, 11-13/16"
It can also be used through a 3/4" hole, but make sure your bench thickness isn't too thick. In reality, this package contains TWO clamps (not just one as implied by the product description), and they are as good as those on the shorter, original Festool screw. In addition to offering vastly superior material thickness hold-down capacities, the machine features these advantages These clamps are designed to work on thicker bench tops because of the improved insertion angle. For Festool's MFT, 3/4" thick MDF is used 20mm holes are used, but other capacities can be used. In this case, only a guideline and some combinations and their results have been shown after some experimentation. The thickness of a bench top is 3/8"
This is a short Festool screw clamp (489570), 3/4 inch The Long Festool screw clamp (489571), 3/4" hole, fits the following rusted fittings The following bench top thicknesses fit 24mm bench tops This is a short Festool screw clamp (489570), 3/4 inch The Festool screw clamp (489570), short, with a 20mm hole, will not fit the short clamp. The Long Festool screw clamp (489571), 3/4" hole - fits but is TIGHT Festool screw clamp (489571), 20mm hole - does not fit or fits but is incredibly tight - It fits well, and I used a drill press to make sure the holes were accurate. In my case, I managed to force the long clamp through the 3/4" hole in the 24mm top, but I had to force it very hard. If the holes are used over time and worn in a bit, I suspect this would work. It's our hope that this info helps you make your decision about which clamps to use. The following information was updated on July 30th, My first contact with Bessey was to find out if they could offer me a solution to these Festool clamps. Festool MFT tables are compatible with Bessey's new product line that they claim works with it. Due to the fact that these appear to be brand new, I don't have any pricing or retailer info. A brochure (I will attach a picture of the product card) was presented to me by an insider. Kish@besseytools is the email address to contact. We are the North American branch of BESSEY Tools. I just wanted to let you know These clamps seem more attractive than the Festool clamps that I own, but I don't own the Bessey product. A competitive pricing policy is to be expected from Bessey.
Comparatively, this clamp is awful compared to any other Festool clamp I have. A clamping bar might allow them to slip in any direction. The clamps on my tracksaw work even better than the ones that came with it. br>Take care not to fall victim to them.
I really like how the FS tracks work.
In the end, they were all used up. It is not exactly what I would love to pay. 25$ is not what I am looking forward to but, the brand that makes these clamps charges about the same for their version that doesn't fit the rail. are great if you clamp a lot of stuff, but the quick clamps are better if you clamp a lot of stuff.
In spite of their high cost, they are worth purchasing. If you have the Multi-CD player, you can This is a very important accessory for any purpose table!.
There is simply no way to go wrong when choosing Festool tools! These 12" clamps were purchased to complement my 6" clamps, and the quality is as excellent as I have come to expect. This is an excellent pair of.
It's a joy to use.