Enforcer II Tint Meter
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you use any tint meter, you should always clean your windows inside and out before performing a VLT test. With an accuracy of plus or minus 2%, the Laser Labs Tint Meter Enforcer II TM1000 does not lose accuracy when wet. The VLT reading can be set from 0% to 100%. A range of 0 to 100 degrees Fahrenheit is its temperature range of operation. Affected by ambient light, it does not depend on it. This kit includes two different test samples of tinted film to ensure that you can test the accuracy of the
The answer is yes. There is a test glass included with this device.
Thanks for visiting! It is both the Enforcer II and the Inspector II that measure the light transmitted through In other words If "nothing" were to be written on the air it I will be glad to assist further if you need clarification or more information. Dial 800 The 452-word limit It is our pleasure to offer our Tint Meter to you. Best wishes for the rest of your
Selected User Reviews For Enforcer II Tint Meter
I DO NOT RECOMMEND THIS COMPANY OR ANY OF THEIR PRODUCTS! Basically, I got a smaller version of this tint meter. The fact that I didn't realize this when I ordered it surprised me. This was the first time I tried using the included test slides and it threw an error message. As soon as I swiped it a few more times, it began working. My experience with this meter is that I used it twice on car stops. I used it twice before it stopped working. Upon replacing the battery I thought that maybe it had been dead after sitting in my duty bag for so long. One small piece of plastic fell out of it when I opened the unit (it was about an eighth inch long). The damn thing still won't work even after I replaced the battery. Assumedly, the little plastic bar went over the window as an activating switch for the meter when it was lowered down. In the next few days, I will attempt to return this junk for a refund or replacement. Upon receiving the results, I will let you know.
This kit includes two different test samples of tinted film to ensure that you can test the accuracy of the The VLT measurement on my unit was taken at the same value that was printed on each As part of the testing stage, the unit turns itself on and off automatically. With the help of this meter, I was able to measure the visible light transmission from my tinted door windows in very precise terms. This unit can only be used to test the tint of doors with windows that can roll down. It needs to be able to slide over the glass in order to do so. It is not possible to test your windshield or your rear window with this unit. In case you are looking for a tint meter that can test any kind of window (including windshields and rear windows), the Laser Labs Inspector II TM2000 Window Tint Meter is what you need. Several tints that I had installed needed to be verified for their VLT, so I bought a tint meter to check. My front door windows were measured at 9% VLT using the tint meter used when I recently had my car inspected. I require that front door windows have a minimum VLT of 25% in my state. The Laser Labs Tint Meter Enforcer II TM1000 was purchased online so that I could verify my tint's VLT.
Clean and test the VLT with any tint meter only after the inside and outside of the windows have been thoroughly cleaned. According to the inspection report, my windows were dirty, and this caused my VLT to be lowered. With the Enforcer II TM1000 I got exactly the reading that I expected when I cleaned my windows and tested my tint myself. For the front doors, I bought 28% VLT tint and for the rear doors, I bought 20%. Based on the Enforcer II TM1000's reading, I had a 29% tint in the front and a 20% tint With its level of accuracy of plus or minus 2%, Laser Labs Enforcer II TM1000 does not matter whether the humidity level is low or high. The VLT reading can be set from 0% to 100%. A range of 0 to 100 degrees Fahrenheit is its temperature range of operation. Affected by ambient light, it does not depend on it. The lithium-ion CR2032, 3V battery (included) is needed. In terms of dimensions, the unit is three inches tall by two inches wide. One hundred fifty-five times one. One hundred fifty-five times one. There are 00 inches The object contains 95 x 45 x 22 mm.
The purpose of this product is to solve a problem with stopping the PC. A 27 percent window tint is required in the state of South Carolina. Most people do not get that clearing. If you are interested in taking the class provided by the company within the booklet, you should do so. Additionally, when you use this, you don't have to shut down your computer. Tinting your computer's window is similar to window tinting. For my purpose, I bought this product for community policing so that officers could explain and show drivers their tint level to deescalate any concerns about It is however required that drivers display a window sticker indicating the amount of tint on their vehicles.
It works well and is easy to use. Honestly, I don't know why Amazon asked me to rate the thickness of the device, but I think its thickness is fine) As well as that, it comes with a neatso pouch, instructions, and two references tints to check the device's accuracy. It would be nice to check dealer-related information A tint was installed on my car to make sure it met the requirements of my state. The answer was yes, and by a large In addition, it reads the tints of the reference well. On a side note, it was interesting to measure how dark the windows on the back of my truck actually are.
Laser Labs Tint Meter is an excellent tool. It's very easy to use, easy to read, and seems to be As far as I can tell, I get identical readings no matter what the lighting or environment To evaluate the cumulative results, I have also tried using different tints of film slid between the side window glass and the meter In addition to the film, there is an existing tint value on the glass. The tool is helpful if you want to add values to achieve a certain result. Overall, it is a great tool that I would recommend to anyone.
According to the advertisement, it works perfectly. My windows were always tinted from the factory and I always wondered how much they would have. The majority of window tint installers only have 35% and lower tints, so if the window is factory tinted, then you are over the legal limits which are 35% in Massachusetts.
There is no problem with the battery life. As of yet, hasn't died. I'm not sure how easy it will be to change them once they're gone. There are bigger ones in full size, and this is the smaller version. The measurement glass comes with the gun and always seems to be dead on. Sometimes it may be a little off, but it always seems close.