LUXE Bidet Neo 180 - Self Cleaning Dual Nozzle - Fresh Water Non-Electric Mechanical Bidet Toilet Attachment (Blue and White)

The Luxe Bidet Neo 180 caught my attention after I read all the reviews. It is the first one I have ever had. With the 180, you can turn a lever (instead of a dial) and that makes it easier to get The message appeared just a few moments Install the following This was a pretty smooth process. Even though I presume that you are going to have to work around the installation of the tank hose before installing the bidet. I had to contort myself to get back to my toilet because there wasn't a lot of space around it. The only way to keep it from leaking was to tighten a few things. The following preliminary tests will be conducted To make sure the lever did not leak, I asked my husband if he would like to watch me flip the lever for the first time. I poked my head over, pulled the lever, and sprayed my face with water. (He doesn't seem convinced there is a bidet and looks suspiciously at it) While standing in front of it, I leaned over and pressed the button. Then I performed some surprise dance moves to turn it back on. As he laughs, he still holds his head up high. I still have water on my shirt. Voici a tip Whenever possible, sit on it to test or make sure you have the "clean" setting selected. The actual testing is as follows There was a chance I would get sick from the cold water. You can fill half of your colon with a quart of water if you take one quart of water to start. It's amazing how quickly you forget the water's temperature in just two seconds. It's nothing to worry about if the water is cold. Voici a tip When you aren't sure what you are doing, don't turn it on full blast. In fact, I think I blew it out. Choosing to use a new language is never easy, but once I got past the learning curve, everything was amazing! This is definitely something I am going to enjoy.

Harris Grimes

| Sep 08, 2020

In the master bathroom, we have one and in the second bathroom, we have another. Our bathroom has two toilets. One is the elongated type, and the other is the conventional size. Both fit almost perfectly, no bumpers were required. Moreover, the metal t-shirt I purchased was very nice too This is an excellent adapter, and I highly recommend this one An adapter that has a Shut-In feature You need to shut off your valve. The Bella Bidet Solid Brass Metal T-Spout, along with the Bella Bidet Solid Brass Metal T-Spout A second bathroom was also equipped with an adapter. My only issue with the Neo bidet is that it comes with a white plastic adapter. There is a metal T-shaped tube Water pressure valves are part of these adapters to control your water pressure. They are stronger, last longer, and have a water pressure gauge. When using the metal T-shaped pipe, we found that the full water pressure was too much for us, so we reduced the water pressure Valves that adapt to different configurations. A handle on the bidet can also be adjusted to adjust the water pressure. Using the bidet, you can adjust two controls It has two handles one for switching the water on and off (the longer one to the front), and another for selecting the water pressure setting. The heiny weighs 1 ounce and the heiny-weight weighs 2 ounces There are several settings to choose from, such as the wash, feminine wash, and nozzle cleaning. There is no electricity required to run this. Pulling up gently on the front control knob is all that is needed to connect it all. When you turn on the water, the water will start flowing. You can keep the water on as long as you push it back down. You can pull up gently at first for lighter water pressure, and then pull up in steps until you get the desired water pressure. One piece of toilet paper was used to wipe off the moisture. There's something about the feminine wash that I dislike Because I don't think its spray hits in the right place, and the spray is very wide and gets my legs wet, and if I'm not careful it sprays out onto the floor, I won't use it. We live in south Florida, so the water never gets cold, so we did not need to purchase a bidet that uses hot water. We plan to use this bidet more often, as it will reduce our toilet paper usage and increase our comfort. It is warm in the winter, but not so cold that it is If you live in a Canadian area where cold water is available, you can buy a unit that will connect to your hot water pipe as well as your cold water pipe. This is not difficult to install and does not require a powerful person. It is imperative that all items are lined up perfectly on the water connections, and nothing can be screwed on crookedly. Tightened the three metal connections to the t by hand, then tightened the three metal connections to the t by hand With my wrench, I just loosened up the adapter a bit. There is no way you can use a wrench to tighten the bidet connection, as it is made of plastic, which will break easily. A leaking item will result if you tighten it too much! In the end, we had to buy a few of these until the right one was found. In addition, I highly recommend viewing some of the videos that Amazon customers have created. Thus, I am in love with The seat is comfortable, and the air is fresh. This is something I wish I had had a long time The lever on this bidet has a style of control handle that is particularly convenient, it is just a matter of pulling slowly up to get the pressure you want, then pushing back down to turn it This type of handle is unique to Amazon bidets, and I haven't seen it anywhere else. As for the other dials (the rest are all buttons) 2) purchase the separate Luxe metal t-shirt Line everything up carefully and don't tighten it too much, and 2) line up the adapters.

Zaylee Sosa

| Feb 21, 2021

When I was researching reviews of this product, I noticed the dial would adjust the intensity of the water jet. There was only one jet in the butt of the vehicle, but it looked okay. The model I bought is a female model, so I thought this would be the same, with two jets instead of one. It is a truly terrible design choice because the dial does not increase in intensity with the number of degrees on the dial. As soon as you select your jet setting, you're supposed to pull back on the lever. (Butt or vagina) In theory, that sounds easy enough. Even if we were able to simply get a gentle stream, it wouldn't be enough. The blast either blasts you fully at 110% power or it doesn't. That is enough force for the water to penetrate my orifice, and it takes me a second to push it out again. Additionally, I also have a very heavy flow period which makes things worse for me because I am an overweight woman with bad external hemorrhoids. The only consumer demographic that would benefit most from this product is me, but I have a hard time using My hemorrhoids are the entire reason I have this problem. The only thing that happens is that I get hurt. A separate source of irritation is that about 30% of the time when I stand up from the toilet, the side of my leg somehow pulls the lever up with me, thus drenching my clothing and genitals in toilet water, as well as the floor and walls. In my opinion, I cannot comprehend why anyone actually thought it was a good idea to use this lever. The cost of production may be cheaper. recommendation, no matter if you are a woman or not, would be to get a single jet model.

Stormi Lara

| Oct 27, 2020