Hydrofarm HGGR75 (25 Pack), 3/4" Rubber Grommet, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Drill a 1 inch hole for the grommet in 1/2 inch pvc for a snug fit.
I tried 3/4" pvc pipe, but the fit was extremely difficult; I believe this was designed for 1/2" pvc pipe because that is what I used it for.
I drilled a 1" hole and it worked perfectly for me. I'm also working with 1/2" PVC. There are no leaks and the fit is very tight.
Yes, and without leaking (if you're talking about a standard 5 gallon bucket from a home improvement store). All you have to do now is double-check that the grommet is properly seated in the hole's grove. Then, to make it easier to insert the pipe, lubricate it with vasolene or something similar, being careful not to push the grommet partway out of the hole.
Selected User Reviews For Hydrofarm HGGR75 (25 Pack), 3/4" Rubber Grommet, Black
These are ideal for creating waterproof ports in the sides of plastics such as buckets and containers. Others have suggested a maximum hole size of 1 1/8", but I found that to be a little too generous. I recommend drilling a 1" hole because it will be very tight and will not leak. Also, I tested a variety of hole saws and drill bits on a junk bucket first, and I discovered that one of these Forstner Bits was the ABSOLUTE BEST way to drill a perfect hole. If you want a perfect hole the first time, follow these steps. Then don't waste your time or risk destroying your materials. You'll be glad you did if you get one of these Forstner Bits! Rubber grommets that are fantastic!.
If you're using dutch buckets, bato buckets, or dwc systems, these rubber grommets will come in handy. I bought these to use on my deck to build a DIY system based on 10 gallon plastic totes that I saw on a website. I built an eight-tote system with 16 pepper plants out of about 18 of these. They're all doing a fantastic job and putting out high-quality work. The rubber is of exceptional quality. When compared to the others, they were not cheap and quoted expensive. As a gardener who has tried a lot of them, I can confidently say that these are the best. There are no leaks at all. I used both PVC and regular rainbird drip irrigation 1/2 inch supply lines, and the rubber gripped them tightly without leaking. Use a clean drill bit and file down any rough spots to ensure the hole is exactly one inch in diameter. With a little oil, the grommet will stay in place and slide in easier. I used a little coconut oil to help them settle in, but I didn't need any in many of the buckets. It's been in the hot sun for about four weeks now and hasn't shown any signs of wear. The remaining ones were used on 5 gallon food-grade buckets, and they worked perfectly. The price is well worth it for the grommet.
These are the ones you want; don't settle for the cheapos; the mold damage and nutrient losses caused by leaks aren't worth it. Furthermore, Chinese rubber degrades in about a year. On the inside, they have a 1/8" reduced bore that folds out onto the pipe, resulting in a perfect seal that can be wiggled without opening up on the side.
These Hydrofarm Rubber Grommets are specifically used outside in (22) Alaska Grow Buckets. They're all on their third season and haven't leaked yet. (In this Texas heat, that's not bad. ) )br>br>According to the instructions, drill a hole in your recepticle. Vaseline on the grommets makes seating them a lot easier. br>br>I'm not sure what pipe sizes these grommets are designed to fit. When it comes time to insert the pipe into the grommet, do yourself a favor and use your shop grinder (if you have one). great), grind off some of the pipe to reduce the diameter, tapering the pipe for about 3/4 of an inch from the end, and you'll be able to fit it through the grommet. (Apply vaseline to the affected areas once more. ) )br>br>Best of luck to you.
Install this grommet in a plastic bucket, then insert 1/2" PVC pipe through the grommet. It works well as a sealant. It's critical that the hole diameter in the bucket is no larger than it needs to be; the smaller the hole diameter, the better. On a spare bucket, try out different hole sizes to see what works best.
It was only yesterday that I arrived. In a zip-top bag with easy access, the product count is correct. It appears to be a no-brainer for insertion into a 1" hole cut to accept 1/2" pipe; the grommet has a nice feel to it, and it's very malleable to insert into material as well as for pipe passage. Has a second collar that firmly encircles the pipe for a secure seal. It's simple to use an air lift pump or to move water between tanks. It's a good choice for high-tension areas where glues and sealants could fail. Many thanks to Hydrofarm. It's also available in a 3/4" pipe. .
So, after reading a lot of other reviews, I came to the conclusion that I needed to drill a 1" hole. So, to be extra cautious, I used a test bucket, drilled the hole, and fitted the grommet in. It seemed to fit well, so I moved on to my good buckets. I had six leaky buckets, as it turned out. So I went to the store to get more buckets in a smaller size, and they did it again, so I said screw it and didn't have the sight tube/drain line. Overall, I think they're a sham and would not use them again.
These look like they'd work well on solid tubing or pipe, but they don't seal when used with barded fittings. The I. Instead of having a small seal area on one end, the grommet's thickness should have been consistent throughout. br>It fits nicely in a 1" (one inch) hole, so there are no issues there. I added a 33x3 o-ring to the seal as a fix. To the fittings, a ring has been added.