Timer WIFI 10 AMP 6V 12V 18V 24V TIME ON OFF DELAY CONFIGURABLE, CYCLING and OPTIONAL TRIGGER
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
For this case, you will need two parts. There is a normal timer that sets the time, you can set it as many times as you like and with the wall clock it shows the time in real time. This is for the short period of time you require it, like 5 minutes or any time you need it. There is another device that you need called Delay off relay. A 5 minute timeout will be used to turn off the current flow. Choosing Delay On will result in the opposite action being taken. In order to setup the timer, you must first wire the active to A1 and the neutral to A2. The delay was caused by a weather delay. To control the timer, set C and NO at the end of the timer. The DIN model is easy to choose and will save you space.
A high temperature of no more than 100C should be observed
Among the firmware's 30+ features are encryption, reading/writing, and more. There is a list of all the available functionalities in the manual
In order to connect the phone to the wifi network, the access point is configured with a timer that generates a separate network. There is therefore no need to use the internet
Selected User Reviews For Timer WIFI 10 AMP 6V 12V 18V 24V TIME ON OFF DELAY CONFIGURABLE, CYCLING and OPTIONAL TRIGGER
There was an incident recently when a salesman lost all the keys for a new Highlander, and the only way to keep the smart key computer awake so you could reseed it was by cycling the door jam switch 10 times at 100 am. Each interval should last 5 seconds. We listened to the same song for over 20 minutes. Once you lose your rhythm, starting over is not an option. In that case, this is what you need to do. For the timer, use a jump box to power the ground side and a relay to cycle the ground side. It's worth it to spend 40 bucks and get the programmable wifi one if you're a Toyota tech.
There are a lot of options and uses for this. It's a pretty amazing timer, this one. During the search for a timer, I wanted to find a quick one shot off delay trigger in order to make a DIY spot welder. I am perfectly pleased with the precision of 1/30 of a second provided by this timer. It may be more difficult to program some timers, but this one has built-in WIFI connectivity which makes it a breeze to use. With the white wire connected to a positive voltage, the timer is powered on, and the wifi is activated and the timer is connected to the internet. It is so simple to use and there are lots of different settings that can replace all types of timers. Don't hesitate to pick this up if you need a DC timer. While it may seem expensive, it's worth it.
In many states, this is used when using wipers to turn on the headlamps and taillights. Fortunately, I already have relays for the main beam headlamps and LED bulbs for the taillights, so it should be a smooth transition for me. The wire that will work best is wire 10 with timer 1 set at 10 seconds, which is the delay to turn the lights on. I'm waiting for a new wiper delay switch so I can see which wire will work best. You can then use the windshield wipers to quickly clean or wipe the windshield without having to turn on the headlamps. The timer 2 is set to 20 seconds, which is the time it takes after the wipers have been turned off before the lights remain on. To ensure the lights stay on when using the wiper delay, turn on the lights first. Testing was successful and the program was very easy to create. I recommend it.
I am very satisfied with the product. It works perfectly and is quite affordable as well. As a result of this, I am using it to run a small water pump that provides water to my pool's water slide. I used a simple push button to trigger it, allowing it to run for a period of time and then stop, allowing it to continue charging. This manufacturer provides EXCELLENT service. In fact, I emailed them at 830 p. m. EDT a couple of days ago. My question was sent to an email address at 30pm on a Thursday, and it was answered in five minutes, with constant communication until I had resolved the problem. My sincere gratitude goes out to you.
In such a small package, this item is able to perform so many functions. The program wasn't exactly clear to us at first, so we reached out to timersshop multiple times via email, and he always responded very quickly. Sometimes it was within hours, sometimes it was instant. Whenever I spoke with him, he was friendly and very patient!.
I had to try a couple of times before I got it to work, but it wasn't hard. Just a few small nuances, such as leaving the wifi trigger grounded, and making sure you've disconnected and reconnected the power before your new program begins to work. In my case, I want to keep my ignition circuit active after I start my car (from on to start and back to on again). -- My ECU no longer reboots during the small blip between turning on and starting the car. This little doodad is quite handy.
In addition to the turn signal, LED strip lights also turn off when the turn signal is disabled. In the timer function 13, digital trigger 2 was set and timer function 13 was used. There was a need to reduce the voltage of the trigger very low in order for the sensor to recognize it. By playing with the settings for the T1 time on, I was able to predict exactly how many seconds I would have to remain on. At first I had it set too long and when I disconnected the turn signal, I was noticing my lights flashing for I did not like that capability for some reason (you may like it, but I did not).
I followed the instructions in the manual provided on the link provided without any problems. I found the instructions easy to understand. My timer was installed in my car in less than 15 minutes from the moment it was programmed. A reverse camera was installed as part of the Android Auto and Carplay (phone mirroring) project in the car. For the module to turn on, it needed a trigger. In the manufacturer's recommendation, a momentary switch with a normally open state should be installed. It was not my intention to add a switch. The first step is for it to be visible from inside the car. A second step of manually pushing will be necessary in order for the module to take effect. In order for this to function as an OEM install, I wanted it to act like one. The driver does not have to act on the trigger because the timer automatically triggers the module. I like how small it is, and how easy it is.
Related Products For Timer WIFI 10 AMP 6V 12V 18V 24V TIME ON OFF DELAY CONFIGURABLE, CYCLING and OPTIONAL TRIGGER
