Anderson Powerpole Connectors 10 Pair Genuine

The order I ordered today was delivered to me "Jeez, these things are kinda small for 30A!" was my reaction when I saw them for the first time. You will need a crimper which is proper for cartridge contacts since the contacts are "barrel" type! Please note 10 gauge wire is the maximum size for use (which is why the "30 Amp" rating was created). The following notes apply to the assembly 1) Depending on the wire used, you may need to "shave down" the insulation (1/2" behind the strip line) to make it fit into the connector's rear. 1) The contact is the "one-to-one" type A new "way" is inserted! Make sure you do not place it upside down. 3) When inserting the contact, press sufficiently hard until you hear/feel a "click" If the connector is fully locked, it indicates that it is fully inserted. 4) Do not allow wires to extend past the "wire stop" on the contact! This will prevent the contact from locking, therefore, do not use it. 5) DOUBLE FLOOR BEFORE you install a contact, make sure your wires are of a certain "polarity"! In the following examples, you would use the "wrong color" body (i. e. However, since they are black when you want red), it's a real pain to remove the contact, and you will probably need to cut it off and apply a new one.

Anyhoo, they seem to function as intended.

Mira Poole

| Mar 08, 2021

The roll pin does not come with this set. Although I'm not an Anderson Power Pole connector expert, I think you will enjoy them. I just finished using these connectors to attach my first one to the truck. I have been able to connect to the connectors. Even though, I don't know what the other providers are like or have much experience with them, I had no problem. Next, I will let you in on what I dislike about it. There is no lock pin in these plugs, so the two pieces of hardware are not connected. It seems Anderson omits the roll pin in his design. Although many other sellers on Amazon do include the roll pin, it might be the case for you. This is such an inexpensive part that this seller can just throw it in as it is a small part other Amazon sellers are doing it too.

Francis Bentley

| Sep 09, 2020

I like these, they work well, they are 15 amp and 30 amp, yeah they are cheap considering The shipping charge was charged correctly because the package was properly packed. I found the connection to the power pole base to be very positive. You can never have too many locking pins.

Macie Gonzales

| May 05, 2021

For connecting a 36-foot long cable, I used these Package of a 24 volt lithium battery to power up a Bafang BBS02 590 There are hundreds of Watt bicycle motors out there, and they all work perfectly. As stated above, you will have to insert the connector part into its plastic sleeve, but with ordinary hand tools such as needle-nose pliers, you can accomplish it. Pliers with a long nose can be used so long as you use them carefully. Make sure that the two connectors are properly mated in order to produce a broad contact surface to transmit the current. This is especially important if you are passing high current loads through them! The maximum current draw on my computer is 15 amps This type of connector can handle 17 Amperes or so, and it works for that load over a period of three months. In these cases, gender has been taken into account You need to be very careful when connecting the "less" connectors, so make sure you have the correct polarity in place before making the final connection- Getting across the border is possible If you wire or make a It is possible to connect polarity. It is recommended that each wire is marked with tape, etc. to avoid.

Ocean Burke

| Apr 30, 2021

It is no longer necessary for devices to unplug all by themselves, or for connectors to overheat. Aside from being solid and reliable, they also have a clever design that does not have a male or female side - it's all one great piece. Because of the fact that the plugs can't be plugged in upside-down, there's only one kind, and by slid them together together, you know the polarity is right. There is no doubt that the invention of the decade has been made. You might want to look back at the last decade The RIGHT solution for low voltage power connections has been around a long time, but I don't know how long they have been out.

Linda Moss

| Jul 11, 2021

All of these connectors have been used by me There are more I need to order. Connectors of the following types The pieces are molded to fit together and have thick metal pins, so they stay put once thing they forgot to put in their notes was to get the Anderson crimper for the comms. These are excellent products that I wholeheartedly recommend. Lastly, I would like to mention the following Since soft (thin strand) wire is hard to assemble with a screw driver, I use a small screw driver, but I wish there was a tool for that.

Enoch Haley

| Apr 30, 2021

Connectors such as these have always been my favorites My electric R/C aircraft use these connectors the most - they provide a secure connection. My main use is for battery/light connectors for cycling night lights and other similar connections, but I also use them for motors, battery chargers, and other electronic devices. For most applications (I usually run them up to 45 amps or so) they will carry plenty of current, and with the easy connection orientation flexibility I can adapt them to situations where I need a connector (and there is no need to worry about not having the right Most people simply crimp these together, but I crimp, wick solder into the wire/tab interface, then crimp again. A low-cost, high-quality foundation is created in this way The worry of resistance - You are able to connect for free. I highly recommend this book!.

Regina Hoover

| Aug 06, 2020

I have used these in a variety of applications where I need to move electronics between power sources or need to remove a component (such as It is impossible to beat Powerpoles when it comes to the durability of In most cases, they stay connected after the connection has been made. It is relatively safe to move the cables around, unless there is a significant amount of movement. As long as you are connecting multiple powerpole connectors linked at least as a pair, you can apply a ZIP TIE on the inside of each connector to ensure they do not pull apart. The internal metal connectors are spring loaded so they always press against each other when connected. Silver plating appears to have also been applied to the connectors to ensure good As far as the amount of current they can carry is concerned, the connectors themselves do not pose any limitations. You must attach the wire that is the right size. A connector with 30 amps of current capacity, which supports a 10 gauge wire, can actually carry 3x the current (if you use a large enough wire). of having super low resistance connections is that the connectors are not prone to heating up (even when moved).

Kadence Wilcox

| Dec 16, 2020