Eaton GFTCB250 Plug-On Mount Type GFTCB Ground Fault Circuit Breaker 2-Pole 50 Amp 120/240 Volt AC
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A neutral wire is necessary for this breaker to work, which would mean it would not work with the 6/2 instead you would need a 6/3 that's grounded
You may want to switch to stainless steel in the future. I purchased a condo with aluminum wire, which Also, the aluminum wire expanded and contracted during its usage cycle, so I had to keep tightening the terminal connections. I had an electrician change the wire on the water heater to copper, and that solved the problem. It's a good breaker as far as I am concerned, I've got it on my swim spa circuit 8/4 wire, 240 volts at 48 amps. I have a run of 50” of
Selected User Reviews For Eaton GFTCB250 Plug-On Mount Type GFTCB Ground Fault Circuit Breaker 2-Pole 50 Amp 120/240 Volt AC
The mount plugs into the wall. Neutral plugs, which are usually found on the neutral bar of certain panels, are commonly affected. There is a misrepresentation in the description. To wire the breaker to the neutral, you will need to mount it on the plug on mount is referred to as this, then all standard breakers are plug on mounts. A second problem was that the breaker would not allow a load to be used. It would be incorrect for me to blame that on the breaker, since I have not verified the load on it is pure.
That was exactly what I needed to fix my hot tub (Nordic Escape MS) that suddenly stopped working. I found that the old GFCI was not functioning. I installed this and it's ready to use! Installs in a matter of seconds. You can take a picture of the old one before getting rid of it to make sure you do not forget (if you are not an electrical expert). If you are reading this, I recommend that you Since I did not test my old one (like I never do), I believe it failed. One of these came with a log of the scheduled tests recommend that you test your GFCI because I think that keeps it in good shape.
Although the product works as advertised, Amazon was the cheapest option I could find locally. This purchase saved me a lot of money compared to other options.
As a replacement for my blown breaker on my hot tub, I received this. quite a simple process to install it. The old wires must be removed, the old breaker must be removed, the new breaker must be installed, then the old wires must be installed on the new Everything went off without a hitch!.
I simply had to replace my broken tub breaker with this one.
I had no problems with the method. It has been 3 months since I first bought the Outside Box and haven't had any issues.
The old and new breakers were the same. Although the breaker is expensive, it is due to its design. After a short period of time, I was able to have the spa back in working order.
I was able to use it because it was the same as the original breaker.