Maurice Franklin Louver-2 Inches Round White Aluminum Louver with Insect Screen (Priced Per Bag of 6). RLW-100
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is actually one and a half inches in length. A manufacturer's specification states that the product has a diameter of approximately 980 inches. In order to fit in a two inch hole, it needs to have a snug fit. It probably wouldn't hurt to use a small bit of adhesive as well!
The RLW-600 is manufactured by the manufacturer The louver provides 0 dB of noise for 100 2" louvers. An area of 803 square inches is free from obstructions.
In fact, you can start to put this inside a hole you can make 2 inches across, and it has metal tabs that will hold it in place once you put it there.
2 have been given to me. There are five five inch round vents, and the screening is one sixteenth of an inch square
Selected User Reviews For Maurice Franklin Louver-2 Inches Round White Aluminum Louver with Insect Screen (Priced Per Bag of 6). RLW-100
Two flanges make up the front of the body. The diameter of the circle is 48" and the height is The thickness of this paper is 175". Approximately one barrel extends from the rear of the vehicle. A diameter of 98. 5" with (3) punch through dents of 0. 0" can be described as 'round'. In order to make the rear barrel interference fit for holes between 1 and . 035", it must be . 035" high. The 880" and 2" are together in the code. The number "050". This would mean you would use a 2" spade bit or 2" hole saw drill attachment in order to make the holes in the wood, and then press them in. *The rear barrel has a value of It sticks out from the back of 5/8" plywood, but not 1/2 " plywood, since it is 775 inches long. * The weight of each piece is three eighths of an There is no magnetic field in the whole unit. **The rear barrel has a bare metal surface value of This is a 0. 20" thick paper.
Of the front flange painted metal, 0 percent is painted. There are 30" of thickness. The screen is completely transparent, with 0 holes. The size of this measure is 50 The number "050". The number of slots 0 is five (5). There are eight of these boards. Each is 70" wide. Each slot has a length of 7", so it has a ventilation area of zero. There are six square inches in six inches of space. It means each unit could be used to cool * a half square foot of attic roof. Thus, these are insufficient to cool an attic or serve as the primary air vents in a roof for dehumidification.
I don't see any rust. There is no need to worry about resistance when using these thin metals however, you should be careful when inserting them if there is To make the screws firmly fit, sand out the hole until you can just tap them in gently, otherwise it may mash. Use an adhesive if they fit loosely otherwise, sand them out. The driver was a plastic plumbing fitting that tapped with a rubber mallet against the rim and a plastic fitting that rested against the rim.
It's spring/summer every year, and I get a small wasp nest in my attic. The nest was too scary to ignore this time, so the pest tech came out and eliminated it for $265. I purchased The Aluminum Louver with Insect Screens for my attic vents to eliminate future fears and the need for a pest professional to zap the nest every year. Gluing the screens in place required the use of liquid nails. of the fittings were snug, others needed to be glued into position. In terms of peace of mind, there is no cost. There are no more wasps in the house. I'd say sure.
Woodpeckers damaged the fascia and these louvers were used to fill in the holes. He could not get into the house because I stapled garland around it. The first few days have gone well. Now that I've tried it for a couple of weeks, it still works. A friend had an after Christmas sale and I was able to buy the garland practically for free. It was 2 inches, which was the size of the largest woodpecker hole I measured. It took a 2in hole saw bit to shape the hole perfectly, one year later
Update this month is Garland's birthday, and I am using the new Garland again. The Woodpecker was very happy to be able to pick his way through the Garland to my fascia once Rather than covering the fascia with 1/8 inch hardware cloth, I covered it with 1/4 Lastly, I have to order some more covers for the Franklin 2 in Louvers.
Because they are a bit tight fit, I can get them in some of the holes around my eaves, but in others, I wind up tearing them as I try to tap them in. There will likely be a problem with humidity in my area causing the wood to swell, but whatever the cause, I would like to keep the birds from pecking at my screens and making nests in my attic by using other means. I was not able to use these.
It was my intention to vent the enclosed gables of a small outbuilding, and these worked perfectly. When drilling a 2" diameter hole, it is crucial not to move the drill as this may increase the hole's diameter so the press might be unable to enlarge it. There is a looser fit in the clothes. Four of them were installed in less than half an hour, and all of them pressed into the 5/8" plywood well enough, three of them very tightly once I realized I wobbled the first hole, which resulted in a quite loose (but adequate) Once you have installed the louvers, you will not be able to easily move them. Thus, you should always press in with the louvers in the desired orientation. They can be painted after they are installed with no problem.
In the attic, I found a rat. I found that he was entering through some ventilation holes that were not filled hidden behind some other materials. In a matter of seconds, my wife managed to push these in with a stool. It was when the rat was out and about that I positioned a camera to watch the holes. I watched it afterwards as well. The look of confusion on his face and the confusion in his eyes when he could not enter "his" house is beautiful. I've been evicted!.
Bringing in reinforcements is a must! This is one of my favorite items because it comes pre-assembled It is better to paint aluminum than to leave it raw. Additionally, there are screens that are included inside the vent cover which will help keep bugs away as well. It is not attached to the vent covers I've previously used.
Related Products For Maurice Franklin Louver-2 Inches Round White Aluminum Louver with Insect Screen (Priced Per Bag of 6). RLW-100
