Adjust-A-Gate AG72 Steel Frame Anti Sag Gate Building Kit, 36 to 72 Inches Wide Opening Up to 6 Feet High Fence, 2 Pack
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you are going to do this you could probably get it to work, but it would be far easier to build it with the 2X4s (2X6s for wider gates) that go into the slots at the top and bottom, then nail the pickets to those. The way it came together was very pleasing to me.
To span the width of the room, you cut two 2x4's. Stack a 2 x 4 on top and a 4 x 4 on the
A gate making kit is all this kit contains. A gate is custom-made according to your specifications once you measure the wood and cut it.
There would be only one gate that could expand to 30 feet if the opening were 10 feet in length Their YouTube video shows a variety of sizes, but I noticed they have a few more
Selected User Reviews For Adjust-A-Gate AG72 Steel Frame Anti Sag Gate Building Kit, 36 to 72 Inches Wide Opening Up to 6 Feet High Fence, 2 Pack
I always hated my 4-foot chain link gate and wanted to make a 6-foot privacy fence. As a result, I was able to use this kit for my goal of extending chain link posts. Those connecting this to the posts have female ends that are the same size as standard male chain link As a privacy fence have I needed a gate that was 4' wide, and this kit worked out well enough that I didn't hesitate to use it on that project as well. So far, it has been a good experience.
This gate kit has been a pleasure to use. For installation of a double gate, I used the gate installer. It is possible to achieve a total width of 12' by utilizing two of these kits. If this gate kit were not available, it would be difficult to build a gate that was sturdy and didn't sag. Building my gate was made possible with preassembled wooden fence panels. For this kit to work, I had to make a few modifications to my panels. To use this kit you will need two 2x4 boards, cut to the width of your gate, lying around because your gate needs to be 2x4 inches wide. On the box it is stated that it is a digital product, which I did not read in the description.
Using two Adjust-A-Bands on a smaller scale was a good experience It was time consuming to choose the right gate kit, so I picked the double gate kit. Everything turned out almost as well as I hoped. I was not able to use the hinge pin hardware on this kit because of its square posts, whereas the others assume round posts. In order to mount these gates on ROUND fence posts, I had to spend an additional $30 on four six-inch lag hinge pins. I really like it. You will not find a mention that this kit is designed for SQUARE posts anywhere, so be aware of that.
It is a solid piece of hardware. In order to keep it as light as possible, I used cedar 2x4 studs and cedar pickets. Strong feeling when stretched up to its maximum width setting of 6 ft wide- this gate is about 80 to 90 pounds with this material. In this case, it might be 150lbs per side. With pine or other hardwood it might be 200lbs per side Weight 200 lbs. Cedar is a light wood, so I would suggest you go with it. This will cover every aspect of the three There is a gap of 4 inches between the gate and the post, so it is possible to trace one extra picket and cut off the latch area. This results in a continuous view with no gaps from the front. ensure that both sides of the gate are supported by wheels so you will not have to worry about the gate sagging.
In addition to helping with the sagging, I ordered this to make the gate building process The latch was not installed because none of the holes were drilled. In addition to not mentioning it, videos show holes that had already been there As for drilling. The directions are not clear on this, and are as concise as they can be. The situation would have been far worse if other people's videos hadn't been there. For the purpose of securing it, I ended up using a hook. Despite the ease of installation, this is difficult to do by There was a problem with the package. Hardware is of low quality, but all other components are in place. The product I bought was inferior to the one I ordered, so I'm selling the other one and getting another one. I'd rather use another product As for how long it will last, I am unable to say. *Update The situation has been resolved. The issue wasn't working for me and I tried contacting customer service. Upon receiving their response, I was told to tighten the wire, which already seemed to be quite tight Then he wasn't able to provide any more help. This is not helpful, and they keep signing the emails with happy to A totally new gate is on my priority list. VERIFY THAT YOU ARE NOT wasting your money.
A metal gate system like this one seems to work well for me. Despite its simplicity, it opens smoothly and easily. I was able to assemble it easily. My only complaint about the frame was that the screws were a bit weak. However, it was not very difficult to make the frame I used some other screws I had lying Upon waking up the next day, I noticed that the frame was a little twisted. However, I do not think there is anything to be concerned about. As a whole, I gave it a five-star rating. Another one I bought was for one.
It would have been nice to have been able to put it together without the wood, because it would have been helpful to measure everything carefully before running out to the store to buy it. The one side was installed on the front of the post to give the opening a more natural angle and to eliminate the gap and it actually over laps the post making it so no dogs can see out, however the other side I mounted normal given the position of the I cut the two pieces of wood the same length, yet the left gate is a bit longer than the right.